Neotec Pro Model Chainsaws
ฝัง
- เผยแพร่เมื่อ 14 ก.ค. 2024
- NEOTEC will be launching a full website soon with all their products available for retail. Thanks for watching!
Indiana Doug Instagram:
indiana_dou...
Chainsaw Addicts Instagram:
chainsawadd...
Chainsaw Addicts Facebook Group: / chainsawaddicts - บันเทิง
![fellow fellow - Proud [OFFICIAL MV]](http://i.ytimg.com/vi/9uZF7BlUQPE/mqdefault.jpg)
Neotec Link: www.neotecworld.com/?parent_user_id=13070577&
Thanks for showing that it’s fine to own one of every saw. I made my wife watch this. 😊
Happy to help🤣
I absolutely LOVE my NS872 and NS8105!! I use the 8105 for Alaskan milling red oak and its a thirsty beast, but cuts through oak like a hot knife through butter
Great video doug!!! I want one of them big boys for no other reason than it looks and sounds cool!
It’s so fun!!! Got get one Chris!
Thanks for making your content.
Thanks for watching, SoCal in da house👍🏻👍🏻👍🏻
Nice! That 872 sounds like it wants more gas in the cut, just a tad more. Took me a while to figure that out. Might not bog down as much. Those are amazing saws! Thanks for making the video.
You are 100% correct sir. I was still on my first tank in this video. Didn’t want to full send it quite yet. Well I did WANT to but, you know😆
Late to the game here. I purchased a NS872 last year and the pull start rewind failed on the third start. Tried to repair but gave up. A piece of the flywheel cover casting broke off. And it stopped oiling. Finally ordered an 038 aftermarket rewind and looked into the oil issue. What happened is the suction channel between the oil tank and pump gasket was clogged with what appeared to be gasket debris. A few shots with brake clean and it was flowing good. I’m thinking it came from the case halves being joined on assembly. The floor of the intake port on the cylinder had a lot of casting flash and I could see where they used a center drill and drilled from the bore into the flash apparently to relieve it a bit as not to change port timing.
I ended up porting it myself and made a .010” base gasket. Because the center drill mark was slightly into the bore, I used the Tree Monkey trick and expoxyed the intake and then free hand machined it with a Dremel leaving just thousandths above the opening into the cylinder to alter intake timing slightly. Opened up the exhaust, gutted the bird cage a bit and added a second side port on the muffler. This thing just screams now! Tuned for 32:1.
Overall it’s decent for the price however sometimes you get what you pay for. If you’re savvy you can correct the Q/C issues.
They seem to run good! That 090 clone is a Beast!👹
I love it.
Some wicked looking saws for sure
They’re fun man👍🏻
Well I seen one saw I would like to try.
That looked like a fun video to make Doug. :D
Had a freakin blast, until after about 10 minutes with that hog 070 clone🤣 it’s gotta be 50lbs with that bar.
Wow, cool vid thanks
Thanks for watching👍🏻
wow, pretty impressive for clones. love the video!
Thank you
Well done Doug. Not bald looking clone saws.
I think they look and perform great for the price point.
They run good my friend i believe they will be good saws.
I really like how the neotecs are build, really good quality for the price.
@@IndianaDoug absolutely buddy i aggree
Great video buddy id like to see the 660 against an oem and a g660 just for shits and giggles ive heard these neotec saws are manufactured a little better. I have no expierence with them though. Actually never heard of them till your first video of the.. Keep the videos coming Doug good work brother
Thanks man. They’re are pretty much the same, I like the quality of the Neotecs better myself. When I get up to Killinger’s place I’m gonna test his G660 against the NS892
Which of the three is your favorite? And i mean if you had to pick one and not just picking by liking the bigger size saw. Which one runs the best and has thr best power to weight ratio and best cost to power ratio... taking all that into account which is your favorite?
Great question! Honestly it depends on the task. I have to say the 660 clone is what I use the most but I cut a lot of bigger wood like in the video. For general use firewood saw that could even tackle bigger stuff, just not as fast, the 038mag clone is ideal. The 070 clone is not very practical unless you mill, but man it is a freakin blast to run, I love that beast😆 hope this helps! Let me know what you end up with and how you like it!
In line for that 872 give away!
Is this your original 892 from months back or is this a different unit? Very nice video. The saws sound nice, well timed....
Brian!!! Thanks for commenting buddy👍🏻 same saw with a better tune and bar/chain.
Hi Doug!!😀😀
I really like the 660 clone. The skid plate is kinda cool. Can you get them separate from the saw?
The 388 is also a really nice running saw.
Don't care much for the 8105. The power to weigh ratio kinda sucks. They are kinda gutless for the amount of cc it has.
Thanks for the demo buddy!!😀😀👍
Logger Al
I can send you a skid plate.
My son has one of these saws and it will cut with the best of them.i had my doubts. Until I used one.we cut firewood.mostly.locust.and if you ever cut locust you know what iam talking about.
Yes, I cut a lot of locust, hard wood that’s for sure. The Neotec Stihl models are impressive for the price👍🏻
Just returned my Holzforma G 070. Clutch failed on day 1. I could probably fix it but hey, if I get a refund I get a refund.
Nice! The 8501 sounds like it needs a “tuning” but it might really come to life when the dogs are stuck in the wood! What is the average price point of each of the saws ?
I’m working on getting all that info Pat
I just received my neotec NS 872 chainsaw with a 24 inch bar. When I went to put the bar on the chain adjuster was missing a screw. I'm like really. I want a new chainsaw or replacement that works. Who do I call. I've had this chainsaw for 2 weeks I can't use it.
Ahhh, can you try something for me first? The chain adjusters were upgraded! The adjustment screws are no longer on the side. Can you look on the front of the saw where the bar meet the saw? The screw will be front adjusting now. Let me know👍🏻
I just ordered a g660 pro, im quite curious how good it'll actually be
I have not run the new style Farmertec 660, but the sure look cool.
The 72 cc needs a full wrap handle
What’s up with the 892bv on website not even sold on Amazon
I heard they were sold out
Is the quality of neotec better than holzfforma? Better parts? Or are they identical and just rebranded
They are two different companies. It’s all preference, but I like the Neotecs better personally.
Several other channels that use saws for a living have stated the same, neotec is better in quality, fit, and finish, even packaging. The Holzfforma/farmertec saws have some terrible reviews including split cylinder, engine seizure/failure, no compression and other issues. Granted, every company puts out a lemon but the overall opinion leans towards neotec as a much better brand.
I don't see how you can even use that damn 8105 cause its so freakin huge. I cant even swing the darn thing. Pictures and vids do NOT do it justice when it comes to showing people how big that beast is. I wanna send mine back and get the 892. I find, ( for me), Its just not practical for my small Alaskan saw mill.
They are big. I use the term tractor a lot lol.
I’m trying to decide on the 872 or the 892. What saw did you prefer, size, weight, comfort, etc???
Overall the 872i is a perfect all around saw to be honest.
@@IndianaDoug that is what I was thinking too. The price between them is practically the same so that wasn’t a deciding factor. I just don’t want to get the 872i and then kick myself for not getting the bigger one. Is there really any difference in cutting speed between them?
@@JohnDoe-ud2cc certainly a power difference but it’s at the expense of weight. If you cut a lot of bigger hard woods, get the 660 clone, if not, I’d go 872 all day
How's the av on the 660?
I’m not a good judge on AV tbh. I like stiffer AV. It feels ok to me.
They seem to do purt good. If they were painted oe colors I don’t think that anyone would know the difference.
Probably not😆
Wonder if we will be seeing a 122cc Neotec like the G888 Holzfforma?
Never know, if I have a say in anything there’ll be Husky and other brands’ clones. The saws that haven’t been cloned but should be, for example 254, 357, 394.
The 395 hasnt been cloned yet either. I know farmertec has been promising it for 2 years but it still hasnt happened. Now they are saying april
@@goatsfirewoodandfarms1918 that would be a really good one!!!
Clone the 3120xp also, I'd buy it just to have one in the shop, 😂
Hey guys the how’s the life on the 871 I’m considering buying one just curious how it’s held up for you
If you’re referring to the NS-872(Stihl 038/380 clone) it’s one of the best they made. Unfortunately they had to add a front bar adjuster, but it a lot better than the other style they had.
@@IndianaDoug thank you sir so I’m assuming you’d recommend this saw
@@richpitty highly recommend the NS-872i
@@IndianaDoug thanks for the feedback if it’s highly recommend that’s what I’ll go for thanks again. I’m sure it doesn’t account for much but you got a sub from me just for responding and being polite about my question
@@richpitty it accounts for a lot. The more chainsaw and axe folks I can talk back and forth to, the better👍🏻
Did the neo Tec 105cc have any real power or is it like a smog era big block Chevy?
I love mine, tons of torque
I want the 8105. Give it to me now!
Lol, ok ok here
Where can I get one
Amazon and ebay.
Second!
Neo-tec has gone up in price. Do you find much performance difference between the Holzfforma's and the Neo-tec's?
I noticed this on Amazon, I always purchased mine from their eBay store🤷🏻♂️ not sure if it’s different pricing.
@@3vil3lvis I dont have the same saws to compare. Meaning, my farmertech is bigger than my neotec. However, neotec makes a nice saw. Plus, you can almost always find them already in the states. I haven't looked at prices for a bit but when I bought my farmertech it was in china. The price was awesome until I paid shipping...
I Like the Bap, Bap, Bap!
@@oldmanfred8676 I agree, it’s really cool🤣
I think you need to look after your hearing and wear some ear muffs
Oh man, so cool! Crush your competition with Promo>SM!!
I mean he’s cutting extremely old dead wood. If you have never owned a stihl 660 I could see where you could be impressed. Stihl are the best saws imo but if you have had dozens of ported oem saws you know what these really are.
You’re dangerous! There’s a break on saws for a reason
“Brake”
Well I used my Speech to text
@@Whyohwhygarage jokes aside, what do you think we should do with all our older saws that never came with a chain brake from the factory?
So did China start making proper bearings, crankshafts, pistons, cylinders, carbs, pawls, bolts and screws yet? Or is this the same saws with a different color scheme?
Good question. Not the same company as Farmertec. We know none of them are the quality of OEM of course. But many of the Neotecs have Italian made top ends, Walbro carbs, etc. and of course any OEM part is exchangeable. I really like these saws. I’m not endorsed by this company so I have nothing to gain by saying this. My newest is the Stihl 038 Mag II clone, and I was very impressed how it pulled a 24” bar with full comp chain. Imo hard to beat for the price.
@@IndianaDoug the Chinese have been copying meteor cylinders and walbro carbs for years, they are not putting in 170$ p/c and 120$ carbs we can be sure of that. But you are right they are cheap enough for anyone to own, but as far as being production saw, no they are not.
@@padraigsheridan4699 I agree 100%. There’s a few fellers out there been running em for awhile that would argue with us on it though. To each his own👍🏻
@@IndianaDoug, I agree. Unfortunately, the internet has given people a means to talk shit on others with no repercussions. You see these types in every discussion, diesel trucks, gun, saws, tools, the opinionated snob.
100% would be a lot different conversation face to face👍🏻
Hey Indiana you actually have neo text contact phone number please give it to me. They need to send me a new chainsaw. Starts good runs good just can't cut no wood with it.
I don’t have a corporate number, I get mine from their Ebay store. I have no affiliation in business, just like their saws.
@@IndianaDoug nobody's got that number. Or they're hiding it. I really got a lemon of a chainsaw.
@@IndianaDoug well my chain adjuster is just a crunchy mess. Won't loosen up or won't go forward.
What’s wrong with it? Also, if you don’t know how to speak Chinese I’d stop looking for that number bud.
@@IndianaDoug the bar tensioner was missing a screw. I went to the hardware and got a screw. It was all bound up. I think it's in the casting. I'm going to have to get the Dremel tool out. I'd rather just have another chainsaw. Not have to mess with it
Well that was a waste of 10 minutes
You forgot to say 10:30 (because of the comment). Also, how does it feel to be the only person in this comment section to say something negative? This video is cool as shit!