NEO-TEC STIHL 660 clone one month review
ฝัง
- เผยแพร่เมื่อ 26 ต.ค. 2021
- This is a one month review of this chainsaw. Also took a look at the cylinder through the spark plug hole and the carburetor inlet and exhaust outlet.
NEO-TEC Gas ChainSaw NS892 for G660 2-Cycle Power Head 92cc 25/30/36" Power Chain Saw 5.2KW 6.4HP Petrol Chainsaw for Big Wood Cutting All Parts Compatible to MS660 066 Magnum Chainsaw Without Bar www.amazon.com/dp/B092JDZS89/... - บันเทิง
![ความรักของยักษ์เขียว (ทศกัณฐ์) - เดี่ยว ไออุ่น [OFFICIAL MUSICVIDEO 4K]](http://i.ytimg.com/vi/yCCy-QVHqK8/mqdefault.jpg)
Had mine for 7 months now. Use mostly for large diameter wood. 3-4 ft. Has worked wonderful. Only problem so far is one of clutch springs broke. A few dollars for 3 OEM parts and I’m back in business.
Good deal! Yeah mines been pretty good too. I’m glad to hear you’re happy with it
Thank you for the in depth update...great job...happy cutting.Shoe
Not a problem thank you for your comment.
They have great customer service,the first one I bought leaked fuel very slightly from the tank took a pic sent it to them they sent me a brand new power head let's see Stihl do that and they said for my trouble keep the first one for a spare awesome customer care not sorry you bought a 1500 saw and we can't help ya ! I run a 36 in on one and the 24 on the others good saw for your hard earned money 💰💰
No kidding Stihl doesn’t want to warrantee anything. That’s been my and a lot of peoples experience.
GREAT VIDEO !
Thank you my friend
Just received y NeoTec 892. I haven't fired it up yet. Everything seems solid except for the carb adjustment screws. In the videos I've watched they said the factory settings for the carb were most likely out of whack. No problem just screw them in and turn them back out 1.5 turns. But the Low side screw doesn't seem to bottom out. I'm scared of putting too much pressure. I guess I will find out when I start it.
Also had to grind the inside saw dog to clear the flash on the casing. Again no big deal.
As for the casting I removed the muffler to check the quality of the casting and found the exhaust port very smooth. No casting flash or leftover sand. It's a good quality casting from the exhaust angle.
Good deal! I hope it runs good for you and you like it. I really like mine and I also bought it with my own money. So I can give an honest review lol.
I just put one of these together from a kit . So far crappy gas cap is the only issue.
Yeah that seems to be the going thing lol
I have a question for you what type of bar and chain did you put on that? Especially the size chain and pitch.
I have 2 different Neotec saws now, both smaller ones. I also had to tune both of them.
Yeah that seems to be the going thing. Do you like them? I love mine
@@backwoodscountry6040 great saws!
Hi got same saw the other day, a question if i may. My choke doesn’t stay down only on off & on positions so im wondering if mine has an automatic choke ? Do the ns892 come with automatic chokes ?
Good saw to have for a dirty job you don't want your other 1,000 dollar saw to go.👍
I absolutely agree!
If I’m paying $1000+ for a saw it better be tough enough to go through the crap as well as the cream.
Mesin yang sangat menarik 👍👍 wow
5 tanks....that's less than a day of work for me
Clone saws are taking over the game tho!
Yeah they are it’s because they’re so cheap. To be honest I can’t remember how many tanks I ran through it now lol I lost track.
@@backwoodscountry6040 Go buy one now. China is "Closed". There are a few sellers getting shut of old stock - but no new stock. Here, they are Unavailable - like every other Chinese saw/Product - "No Idea when we will have more"... You used - recently - be able to buy a Chinese saw with 3 clicks. Now you can click your heart out - you ain't getting one - as China is closed. That ought be a worry as so many depended on Chinese manufacturing - well right now, China ain't manufacturing, it's pursuing "Zero Covid" to distract the Chinese from bigger issues. It is - China - to put it bluntly, Shuit. Which is the 2022 Hybrid version of shut/S**t!. It's all about the hybrids now.. Nobody is much talking about it - but China, pretty much, has shut down. We're hell bent on Zero Carbon - they're hell bent on Zero Covid - which produces Net Zero - or "*@#* F*#@#!" as it used be called before insanity became The New Normal.
If neotec starts making clone to the Husqvarnas like farmertec does then I'll probably get one lol especially if it's the clone to the the 390 if I want a bigger saw really don't mine cuts everything I put to it even a 40 in live oak I did couple years back that was over 150 years old
I have seen the Neotec name but I never knew anything about them. I never would have guessed they're Stihl clones just like Holzfforma chainsaws. Because my brother already has a Holzfforma G660 it wouldn't make sense for me to get this saw if it's the same power head. But, if Neotec clones the Stihl MS 880 then I'll be right on it!
Farmertec makes a stihl 880 clone kit. The kits cost a bit more than the 660 clone kit though.
@@rickyflinchum2909 Yes, the G888. I've seen it. My only gripe is the IF I were to order a kit complete with the chain and guide bar, the selection is not very diverse. Last I checked only two guide bar lengths were available. If I want something different then I have to look elsewhere.
It's an ABS construction as opposed to nylon so it will just degrade and fall apart at some point. Gas and oil cap quality is so bad that I would expect to be replacing them often as hell, and these lose compression after about a year or two at best. These also do not have more power than a 500i.
Of course going be more power than 500i 79.8cc and the 660 is 93ish cc and I can get the sthil 661 for $1050 from my dealer there's only was a $50 difference between the 661 and 461 when they had the 461
Yes I know the 660 has more cc. But it was more a price to power comparison. Although I do think still makes a great chainsaw. I think Echo is also a great saw but very underrated.
How do you store it? Most of the chainsaw cases I've seen are too small.
I’m not sure what you mean if you’re talking about for the winter I use echo red armor two stroke oil and leave it full of gas. Usually my chainsaws don’t sit long enough to gum up. And I usually just keep them in the garage. That one will stay on my Yamaha rhino. Does that answer your question?
Stihl does make a saw case just for the 660/661. It is a monstrosity though!!
@@theweekendwandereriii4121 Yes I bet it is
Tool box
Replace the Carb with a walbro WJ-76 & a NGK plug & you will be set! 😎
I did get a NGK plug for it. But not the car but I will definitely keep that in mind thank you 😊
@@backwoodscountry6040 No problem 😊
👍
just wondering, auto oiler ? or adjustable ?
thanks.
I need a gas cap myself. Not sure where I’m gonna get one I ordered one from Amazon but they sent me a bunch of small ones.
Well, that sucks! I just went to a Stihl dealer and bought one
A couple comments. You stated that it could probably be used as a commercial saw. Most guy I know cutting with a saw this large are indeed in the business, or cutting a lot. You’re giving a one month review. How about coming back in six months and again a year and giving your assessment? Most products will likely last a month. Most serious cutters are in it for the long haul.
Well I’ve had it for over six months now and is still running strong. And it seems to be a pretty good saw. I think it’s aimed more towards the weekend warrior though. A commercial guy is always going to be better off with the real thing. I do have a STIHL 500
I have a stihl 380 magnum built in the 80s . Still going strong even though it's looks worn out. I bought a cheap giants 92cc. Lasted a couple of months. So many problems not worth fixing.
🤙🏻🔥🇺🇸
I bought the 038 mag clone i love it. Nazi saws are way too expensive.
It’s a shame they’ve gotten so expensive. But yes, I love the clones!
Chiếc cưa này quả thật mạnh mẻ tuyệt vời
What fuel mix ratio you running in the saw?
I break it in with 40.1. And then just go to 50.1
Have a buddy with a sthil 440 that's turned for jet fuel and he ran my Redmax 7100 same as Husqvarna 372 or jonsered 2172 when I first got it was 3 days old same 24in bar and didn't want use his 440 for rest day he says mine didn't bog or was alot smoother to run no vibration
I have a Stihl 441 Magnum, ported carb, run nothing BUT rec fuel through it with Stihl synthetic oil. Never a problem, still felling trees.
@@bobdrake5927 ya like the 441 I had one was the none c version
Why have the size and weight of a 92cc saw for a 20” bar.
I think that’s a 24 inch bar. But I bought it to use to mill logs. It takes a lot of power to do that.
I was happy up to my third tank of fuel won’t hold carb tune
Seriously? That’s strange it sounds like it may be sucking air somewhere possibly. Did you check?
400 vs 1150 that's like one third the price if it only lasts for one half of a year in the commercial world it's probably worth it
I will keep everybody posted about how long it lasts. I’m sure it will last longer than a year
I cut alot wood like 20 cords a year for shop and house burn wood every day im gonna try it
I’ve been impressed so far. That’s why I took the time to make so many videos are. I hope it works out good for you.
@@backwoodscountry6040 thanks I appreciate that
@@guypatts494 Honestly, if you cut that much I'd save and get a pro saw. If you buy these cheap copies it may last a cutter like you 2 seasons until something happens. On the other hand,a pro husky,stihl,or echo will last you 10 years or more before needing a rebuild. Quality pays for itself with less downtime and frustration. Buy once cry once.
@@ciphercode2298 or I buy 3 of them
@@guypatts494 As you wish,lol
I'm not big sthil fan only like 2 of them they made the 290 and 441
looks like a better pair of dogs would do it some good those look fairly flimsy. some hardened steel ones would be alot better id say
They’re actually fairly rigid. I thought they were going to be flimsy myself but it turned out that they work OK. Although harden steel ones wouldn’t hurt anything lol
can you buy it all assembled?
If you mean with the bar and chain already on it? No you will have to put the bar and chain on it yourself. The head comes fully assembled.
@@backwoodscountry6040 I just wanted to make sure the head was completely assembled because I saw some videos that made it look like it wasn’t assembled
What is the weight if the saw?
I’m not sure of the exact weight. I think it’s between 13 and 14 pounds. Not gonna lie it’s heavy but it’s a big chainsaw.
Thanks for the info, thinking of getting the old man an firewood saw additional to he's 044.Cheers
@@anthonyfichera1851 You are very welcome.
Probably aluminum instead of magnesium, but I don't know for sure.
I’m not sure. I don’t think it’s aluminum. It feels like magnesium. But magnesium feels and looks like aluminum LOL
@@backwoodscountry6040 Really how do you really know for sure, I sure don't know how to tell.
You can use vinegar. Vinegar react to magnesium by bubbling. Does nothing to aluminum
@@backwoodscountry6040 wow, ok thanks for the heads up
No problem my friend
But yours being around $400 saw can't complain to much lol
Just got one, can't even get it running, total garbage, now getting the run around from the company about return!
Really?
Don't need a saw that big for firewood in my opinion...
Yeah most people don’t. But in my experience when people give away free wood it’s normally huge. And they don’t have a chainsaw big enough to cut it. That’s why they give it away. That’s just been my experience.
I have 2 of the 660 clone for firewood it will level a pile like no ones business but I sell firewood my saws have well over 100 tanks if fiel threw them have to replace the chain adjuster with an OEM Stihl and your good
Just buy a big saw so you can cut anything why would you limit yourself