ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Neotec NH-843 | Husqvarna 543 clone chainsaw
ฝัง
- เผยแพร่เมื่อ 17 ส.ค. 2024
- Amazon Link: www.amazon.com...
eBay Link:
www.ebay.com/i...
Indiana Doug Instagram:
www.instagram....
Chainsaw Addicts Instagram:
www.instagram....
Chainsaw Addicts Facebook Group: / chainsawaddicts
Neotec Link: www.neotecworld.com/?parent_user_id=13070577&
I have owned a neo tech pros. Started and ran great good power bar and chain great. Con handle squeeze felt alittle rough and it leaked bar oil but it wasn't a pro model
Very nice video and info for your community and how to fix the problem. Sounded like it ran nice when you were done. It would of been nice to here it run and cut before the fix to hear and see the difference. Well done my friend. You and your family have a great holiday tome. Be blessed.
I was thinking about getting that exact same chainsaw. I think you're the first person to do a video on this chainsaw
Grab one man👍🏻
Hey Doug,
I actually have this saw and have for a few weeks. I NO expert by any means but I put a video up of me running it thru some big oak check it out. Honestly I'm very impressed with it. I purchased it to help cut down a very large old live oak that is begging to lean over and it's helped me get the job done for sure. Only issue I have had is the sprocket cover was cracked on delivery but thier customer service was quick to get that fixed. Other than that while I was trying to tune it, the damn rubber housing around the tuning screws was a pain to tune cause I really couldn't tell if I was turning anything.
Good info thank you👍🏻 after I uploaded this video I instantly regretted saying these were released today😆 I can see someone watching this a year from now laughing at that. Oh well, what do ya do?🤷🏻♂️
@@IndianaDoug I have also seen a few dealers that are selling the 372 neo tec version also if I had seen those before I purchased mine I would have jumped all over one of them
@@loweralabamahomesteading4661 really? I didn’t know any 372 model were in the States yet😳 I’d love to find one!
Yea I'll shoot you a message on Facebook with a link to it. Ide trade my 865 for one right now lol
Ok bet!👍🏻
Wow
Can’t wait to see it in action! Thanks
Me either😆
That's very interesting Doug.
"If" I needed a saw I would check them out.
I see you are knocking on the 2K Subs door.
Ya I’d say you’re set for awhile👍🏻
I been seeing these for at least two weeks now
Same here. It's getting hard to make time to film and upload or I would've had it up earlier.
Nice saw Doug! I had not heard of it. Thank you!!
Thanks buddy, it’s gonna be fun to test on👍🏻
Awesome saw love it.👍
The meat of the vid starts at 6:00
Most likely, but the meat isn’t any good without the bread and taters🤷🏻♂️
Yes , I like this saw !
I love this thing!😆
Very nice!
Best regards!
My guy👍🏻 thanks buddy!
Nice review Doug! Pretty sweet!
Thank you Chris. I’m sure you couldn’t tell I was excited to get the saw😆
I bet that would be a really wicked saw ported and muffler modded.
I like Neo-Tec as a company. They seem to want to put out an above average quality product.... from the start. Unlike Farmertec, which was VERY slow to catch on to that as a business model. Although Farmertec DID recently step up their product offerings with the "Pro" model saws. (White case & hydro dip plastics) I personally really like the white coated cases on the g372.
Agreed. I like FT’s new line, they’re sharp. Neotec has been around for a very long time, and have all of the same models, they just recently started marketing to the North America.
You got yourself a new saw, I see.🤘
I’m love this one👍🏻
awesome
👍🏻
Very good video and review Mr. Doug...if this one performs like their 660 clone it's a winner....
For sure, I’ll be putting her to work soon. We shall see.
I'm late to the party, but certainly looking forward to these and it's big brother being available here down under. At present it's just the 2 big stihls .
Yes the 400 and 500 are incredible👍🏻
Hi Doug!!😀😀
That is definitely a sweet saw for the price!!
Neotec is running some stiff competition with Farmertec.
Take care my friend!!😀😀
Logger Al
Agreed. I like their machines.
Looks freaking sweet 🤘🤘
Pretty good quality for $289. Not OEM of course, but seems pretty stout, we will find out when I go testing on her👍🏻
Does it have a bolt on square intake or the round clamp style? Curious which 365 they modeled this off of. They are putting out some nice looking stuff, I was pretty impressed with the quality of the 070 that you sent bellhopper.
Square bolt on intake. I really like there saws.
@@IndianaDoug interesting that they would choose the open port cylinder rather than closed. Curious how it runs out. They seem to be better quality by a long shot over the FT varieties.
@@brennancass3747 if only there were more time in the day😆I’ll be getting her in the wood soon! Oh, I like the fact that the 365 is less expensive yet so versatile. The foundation is there for any upgrades/mods at a cheap price point. But if a home gamer wants to keep it stock, it’s still a great saw for that price.
@@IndianaDoug I definitely understand, can only do what you can do. It's a rock solid platform to start from and the sky is the limit. Price point is bang on too.
I like it buddy
Not bad for what it is.
Nice buddy
Thanks Wools👍🏻
If they would build and sale a 357xp and 346xp that would be awesome.🙂
Now you're talkin my language!!!
@@IndianaDoug If they do and they ship them to alaska I would buy a few for sure.
I talked to the rep, he said they don’t right now, but are planning to. Sorry.
That's are gonna be fun🤙🏻😎🪓
Yessir👍🏻
I just got this chainsaw and I tried tuning the carb but I got the screws mixed up. Can you tell when they're set to right out the box?
Should be 1 turn out on both from fully seated position.
@@IndianaDoug thank you
I really like the colors on that. Is a 3120 next on the list?
Maybe🤷🏻♂️
Sure am enjoying your videos!
that model is interesting. what is the weight of the power head?
it might just be a great midsize saw between my lill 211 [toy stihl] and the 82cc mac sp 81 [17.5 lb head] that was my pops and later my work saw.
that ole yeller now runs me ;)
13.2 pounds @65cc
@@IndianaDoug nice thank you
I might have to get one of those
@@bellyacres7846 you’ll like it👍🏻👍🏻👍🏻
I'd like to see you give up 10 to 20 fuel tanks ran through it review.
I absolutely will👍🏻
I had nothing but trouble with mine and sent it back. No support from USA seller thru Amazon. $335
Can you tell me what issues you had David? I’ve seen a few consistent problems on this chassis so far and I’m trying to help Neotec resolve them. Thanks in advance👍🏻
First I had no problems assembling saw but was curious about why they advertise an Italian coil and NGK plug. I read on line how others had bad coils. I could cold start my saw and ran ok for about an hour total while breaking it in. Didn’t try hot starting. but when released trigger after cutting firewood, engine would drop rpm and die. Couldn’t hit start. Checked spark and was none visible with plug out.
Put new plug in and next day it cold started. Died after 10 mins and wouldn’t restart again. Tried contacting seller and they said they tried calling me but nothing came up on phone or reply to email thru Amazon reseller link. Got cryptic return after a few days. Replied, same deal. Language problem? Then sent phone in NY state. Just voice mail. Still no return call.
Would cold start but same problem. I really wanted a lower cost alternative but bought recertified Rancher 455 for about same money with two year warranty off eBay and sent back my neotech after they wanted me to pay return postage. Lack of support was deal killer.
@@davidrasmussen2975 that sucks! I recommend buying from their site directly. Regardless, thanks for the details👍🏻
How does The Handlebar feel does it feel like the right diameter is it skinny
Feels exactly the same. Every part on this saw should be 100% compatible with an OE Husqvarna 365.
Yeah they are just most of the clone saws mainly the older ones the handle diameter was goofy and they felt flimsy they must have improved that. Thats good.
Neo-Tec you are really shooting your selfs in the foot by refusing to ship to Alaska I know a lot of people that buy one up here in Alaska.
I’m reaching out to them on this. Thanks👍🏻
Used your 865 yet
Yes I used it one so far with a 20” bar to cut a few cookies. I will get video soon. You have one?
@@IndianaDoug yes but haven't put bar on it yet, started it after about 20 pulls. Plan on using it some this weekend if it starts better
Hmmm, interesting. I started at 1 turn out from seated position on both the H & L carb screws. Then adjusted the idle until the chain almost started spinning. But when I start mine, I make sure it “pops” once on choke before pushing the choke lever in. First try it took 3 pulls on choke, then 2 pulls with choke off. Now it start up everytime easy.
@@IndianaDoug I'll try adjusting carb, my start was factory setting
@@danachadwick4919 I’ve had 2 models where carb was way out of wack.
Ooo yea replica Competition. Love it brother. How do I become a test subject .!!!!❤️🔥🦾
Lol, they’re $289 cmon!🤣
@@IndianaDoug haha 😂 I paid that for the fT 372xppro. Killer deals.
First!
Mr. Indiana Doug, that $289 towards a nice genuine Husqvarna 365 or a nice Echo made in Japan? I'd be scared to take one of these down to my local Husqvarna dealer. Yeah, even Stihl and Husqvarna have part manufactures in China, that's not necessarily a bad thing but I would perfer as much of the machine to be made in Sweden, Germany, Japan or America. The Chinese are very smart people, why can't the make machines to compete with Husqvarna, Stihl or Echo and set themselves apart? I'd be very surprised if that sprocket and clutch cover was genuinely made in Sweden, that's hard to believe. I wish all you guys the best of luck who buy these saws. I would hate to see you spends hundreds in genuine OEM parts when it was better to spend the extra money on the real deal, call me old fashioned, lol!
I get what you’re saying for sure. I have a lot(a whole lot) of OEM machines. I’d like to keep most of them, especially the older ones, in good shape. One of the reasons I don’t mind throwing some of these clones around. They are a great way for new builders to learn as well. Nothing will replace the real thing(that I’ve seen).
@@IndianaDougI get it sir, the learning part out the equation never occurred to me. Good stuff can come from China so why they don't follow their own path, I don't know. I just like the satisfaction of knowing a good saw will last years and won't be thrown away or recycled in a scrap yard. Echo makes an affordable saw with quality behind it. Do you get any warranty with the Neo- Tec or Farmertec? I mean I can check a spark plug, pull a muffler, clean and sharpen my chain but I'm no mechanic. These saws wouldn't really do anything for me. I love to clean them, sharpen the chains and clean the bar grooves, its just as relaxing as running them.
@@richardsullivan1776 I’m not certain of the details, but yes there’s warranty.
If channels weren't testing this equipment, everyone would be going into a purchase completely blind. The China stigma is a thing of the past, Milwaukee, Dewalt, Stanley, etc all have Chinese plants. 10 yrs ago I'd agree with you, but everything from dirtbikes to tools coming out of China are far better than a decade ago.
I bought all my kids dirtbikes from GPX Moto, California company, Chinese built but excellent quality control. I did this because I could buy a beginner rider a KTM clone for 3000 dollars vs 10k for a genuine KTM, and if my son was not interested a year later, I could sell the bike for 2500 on FB marketplace and be out almost nothing. I will always buy the genuine real deal when I can, but situations sometimes determine what you buy.
You should've put the actual product title in your video title. I really hate having to fast forward to find out what any review actually is. No sub from me! :)
Done👍🏻
Man those mufflers SUCK! Otherwise nice saw
First mod I make👍🏻
@@IndianaDoug that’s for sure. Biggest power killer on those is those useless single port pea shooters
@@Houseworksaws right? It’s about the diameter of a pencil😆
@@IndianaDoug I drill that out with step drill fit a 1” pipe in place and braze it up. E-Z-P-Z
@@Houseworksaws yessir, gets the heat out quick!