Thank you for doing this................I already own a Girsan Regard and a Beretta and I swear by Turkish guns! Been waiting on this video to drop, thank you sir 👍
I already have the two-tone Regard and love it. Saw the gold and looked for reviews on the finish. You sold me, i just went back and bought it! I think it will go nicely with my silver Taurus 92 as well. I may have a problem...
I have this same gun only in bronze. Just hit 5,500 rounds through it. I have 3 real berretas and in my opinion the girsan regard is built better. The locking block is thicker than a real berreta. Mine is Langdon tactical and wilson combat built. Didn't have to modify anything. 3lb trigger and runs like a Rolex.
I'm not really into "gold" guns, but I have to say, the finish on that thing looks excellent. I have an FDE Regard MC and the only things I'll mention as cons were: 1)The factory slide stop won't work well with Beretta 17-rounders (won't lock open, AND sometimes will get the mag stuck in the gun when you try to remove it) and *some* Beretta 15-rounders (though most are fine). All Mec-Gar 18 rounders obviously are no problem with the gun. A Beretta slide stop is a cheap drop in fit for those who want to reliably use any Beretta 92 mag. 2) A few light strikes here and there with NATO spec 9mm, and IMI 115 grain JHP with harder primers *if* a lighter hammer spring is used. This *might* have something to do with the Girsan hammer, which looks similar to the current Taurus PT-92 hammer. It's not skeletonized like the Beretta Elite II hammer, but it has some relief cuts in it that *might* possibly be behind some of the light strikes. I might throw in a normal Beretta hammer to see if those go away 100%. I honestly like the sights on the Girsan better--they are slightly more narrow for the rear sight vs the Beretta one. The left side safety/decocker lever is also easier to reach on the Girsan than the Beretta. So far these seem to be pretty good reliable guns for a reasonable price. I hope they stick around for the forseeable future.
That’s a lot of good information! So far, I’m really impressed with the Regard. The gold finish is way more durable than I thought it would be. Much easier to clean. Not one I would carry due it being so flashy. But would definitely use it if I had to. Has been very reliable with all types of ammo. Thank you for watching!!
Good review, brother. I've heard good things about the Regard. I have a weird discontinued Girsan review on the way. I hope it's as good as the Regard. My wife thinks you are a jam, she was quite entertained
Thank you very much! I hope your new to you Girsan runs good brother. Are you planning on making a video on it? And glad your wife liked the review. It’s nice to have a diverse audience. 😅
Just to let you know, I own several of their products and I had the same issue with the 380 and had to get a pin out of my parts kits because it fell all the way out. other than that, I’ve had no problems so apparently whoever is putting those pins in He’s doing something wrong
Did you have the problem where the barrel is pointed slightlyow left of the iron sight? Because on the slide to barrel contact i can see that my barrel is not centered and contact the low left of the muzzle end slide.
Have had plenty of m9s and 92fs and the girsan comes with steel guide rod which beretta doesnt anymore and they run just as good if not better and they have better triggers cant beat those girsan they are the best berettta clones
I was thinking about buying this gun but now after watching your video I'm definitely going to buy it. And by the way I have a Canik mete, and I was wondering what issues you had with the canik
You probably won’t be disappointed with the Girsan. I’m pretty impressed. I had the Canik TP9 SFX when it first came out. Had a ton of extraction issues. They sent me a new recoil assembly and that seemed to fix the issue. But I was already burned by the time they finally sent me a new spring and rod
It's funny, I both really like the looks of that gun and hate the looks of it at the same time. 🤣 I think is because though I really like the way it looks, I just know it's not my style and it would never get any use. Just too flashy. But it is impressive and the finish holding up that well is amazing. Great video. Subscribed. 😎👍
I have one and I love the look I'll look to getting to the range with it next week after hearing this review and i will post my visit on my page. Thanks for sharing your review.
Can I ask what’s the numbers on that firearm . I know it’s a Girsan regard , but what’s the upc or model number ? I’d be interested in taking a look at one . I know I’m a little late to the party . I’ve seen them on line but they did not look that polished .
I would take gold plated over any other coating. It really surprised me how well the finish held up. Haven’t seen anyone else do a more than a few mags through one so mine is a one of one for now.
@@sacrificialscience4405 No kidding, I just ordered their blue, and gold mc p35, so I'm going to feel a lot more comfortable shooting it after watching this
@Sacrificial Science I already own the deluxe the gold one with the engraving. Really debating if I wanna get this one for shooting and just being rough with it
Man I was gonna get the regular one for my first gun but I’m half tempted to get the gold 😅 nahh I don’t wanna be THAT guy lmao maybe for my second one
I’ve done so much research on this gun. I’m for sure getting it now, Lord willing.
Awesome! They are solid pistols.
I didn't think anyone would shoot the gold versions lol
I had to know how it held up. Lol
Why buy it if you won't shoot it?. Just buy a cheap model gun and paint it if you want a show piece. Smh
@@austinmurphy6359collecting display purposes.
Thank you for doing this................I already own a Girsan Regard and a Beretta and I swear by Turkish guns! Been waiting on this video to drop, thank you sir 👍
Thank you very much for watching! I am truly impressed with the Girsan and the finish on it. Very good quality. Honestly like it as much as my M9a4
I already have the two-tone Regard and love it. Saw the gold and looked for reviews on the finish. You sold me, i just went back and bought it! I think it will go nicely with my silver Taurus 92 as well. I may have a problem...
That is great problem to have brother! 🤣. I’ve put a few hundred more rounds through it since the video and it still looks just as good.
Right there with you brother! Can't buy enough of these beautiful clones coming out the last few years.
I have this same gun only in bronze. Just hit 5,500 rounds through it. I have 3 real berretas and in my opinion the girsan regard is built better. The locking block is thicker than a real berreta. Mine is Langdon tactical and wilson combat built. Didn't have to modify anything. 3lb trigger and runs like a Rolex.
As P80 Ralph would say Gold, Gold, Gold. Great follow up review Brother I love this gun
Thank you Chris! I ended up liking it way more than I thought I would. Definitely a keeper.
my man going for the full Goldfinger build.
🤣
I like Golddddd
I have this gun as well! I friken love it! Named it Troy! Fun to shoot and look at!
Try some blue loc tite on that pin before you try staking.
I shot my gold regard for the first time yesterday. That thing is solid. My friend that has the two tone regard said the trigger on mine was better.
I believe it! The gold regard is an amazing shooter for sure. Makes me want to go shoot it again
I'm not really into "gold" guns, but I have to say, the finish on that thing looks excellent.
I have an FDE Regard MC and the only things I'll mention as cons were:
1)The factory slide stop won't work well with Beretta 17-rounders (won't lock open, AND sometimes will get the mag stuck in the gun when you try to remove it) and *some* Beretta 15-rounders (though most are fine). All Mec-Gar 18 rounders obviously are no problem with the gun. A Beretta slide stop is a cheap drop in fit for those who want to reliably use any Beretta 92 mag.
2) A few light strikes here and there with NATO spec 9mm, and IMI 115 grain JHP with harder primers *if* a lighter hammer spring is used. This *might* have something to do with the Girsan hammer, which looks similar to the current Taurus PT-92 hammer. It's not skeletonized like the Beretta Elite II hammer, but it has some relief cuts in it that *might* possibly be behind some of the light strikes. I might throw in a normal Beretta hammer to see if those go away 100%.
I honestly like the sights on the Girsan better--they are slightly more narrow for the rear sight vs the Beretta one. The left side safety/decocker lever is also easier to reach on the Girsan than the Beretta.
So far these seem to be pretty good reliable guns for a reasonable price. I hope they stick around for the forseeable future.
That’s a lot of good information! So far, I’m really impressed with the Regard. The gold finish is way more durable than I thought it would be. Much easier to clean. Not one I would carry due it being so flashy. But would definitely use it if I had to. Has been very reliable with all types of ammo. Thank you for watching!!
That is impressive. Getting me one.
Just bought one of these super excited now
I am really impressed with it. Highly recommended these.
How much did you pay!? I just got one
Best review on the MC
Thank you very much!
Good review, brother. I've heard good things about the Regard. I have a weird discontinued Girsan review on the way. I hope it's as good as the Regard. My wife thinks you are a jam, she was quite entertained
Thank you very much! I hope your new to you Girsan runs good brother. Are you planning on making a video on it? And glad your wife liked the review. It’s nice to have a diverse audience. 😅
@Sacrificial Science Yes sir I am. Few other things in front of it, but it's in the queue.
@@untacticaltexan nice! Looking forward to it!
Thinking about buying the MC Deluxe Gold version.
Those are slick!
Just to let you know, I own several of their products and I had the same issue with the 380 and had to get a pin out of my parts kits because it fell all the way out. other than that, I’ve had no problems so apparently whoever is putting those pins in
He’s doing something wrong
Did you have the problem where the barrel is pointed slightlyow left of the iron sight? Because on the slide to barrel contact i can see that my barrel is not centered and contact the low left of the muzzle end slide.
Not that I’ve noticed. Its shoots to point of aim. Is yours accurate the way it is?
I’m looking for a new gun and I was thinking of getting away from 9mm for like 57 or 10mm but damn that thing is so pretty
Thank ya! 10mm is great round. Hard to go wrong with that.
@@sacrificialscience4405 agreed.
Have had plenty of m9s and 92fs and the girsan comes with steel guide rod which beretta doesnt anymore and they run just as good if not better and they have better triggers cant beat those girsan they are the best berettta clones
I was thinking about buying this gun but now after watching your video I'm definitely going to buy it. And by the way I have a Canik mete, and I was wondering what issues you had with the canik
You probably won’t be disappointed with the Girsan. I’m pretty impressed. I had the Canik TP9 SFX when it first came out. Had a ton of extraction issues. They sent me a new recoil assembly and that seemed to fix the issue. But I was already burned by the time they finally sent me a new spring and rod
@@sacrificialscience4405 thank you for the reply. I'm about to order it now
@@AtlantaGunz I hope you like it as much as I do!
I'm subscribing just from this vid an the last about this gun, gobba check out rest of your vids..
Thank you very much!! I really appreciate it
It's funny, I both really like the looks of that gun and hate the looks of it at the same time. 🤣
I think is because though I really like the way it looks, I just know it's not my style and it would never get any use. Just too flashy.
But it is impressive and the finish holding up that well is amazing.
Great video. Subscribed. 😎👍
Thank you very much!! I originally got it because I just wanted a gold gun. But I shoot this way more than I thought I would. Thank you for watching!
Wow! if that was Berettas cerakote it would be quite a bit more worn out for sure. Im also impressed with this thing
It’s a really nice finish for what it costs. The beretta isn’t fairing so well. Lol
I have one and I love the look I'll look to getting to the range with it next week after hearing this review and i will post my visit on my page. Thanks for sharing your review.
It's been a year... still have it? still shoot it? did you get that gold flashlight?
Still got it! I think it’s been out twice since the video. Never got a gold light. Still looks just as good as it did. 👍🏼
Just got my girsan deluxe last month!
That’s dope man! I’m jealous now. 🤣 Going to keep my eye out for one of those.
@@sacrificialscience4405 it’s so worth it 😭 I picked mine up for 785 before tax. I couldn’t pass that deal up! Gold hun for less that 1k?! Yes please!
Can I ask what’s the numbers on that firearm . I know it’s a Girsan regard , but what’s the upc or model number ? I’d be interested in taking a look at one . I know I’m a little late to the party . I’ve seen them on line but they did not look that polished .
The model is a Regard MC. Doesn’t really have any denoting number specifying whether or not it’s the gold plated model or not on the gun.
@@sacrificialscience4405 gotcha
Can’t make up my mind between this one or the engraved “Deluxe” version
You can’t go wrong with either one. The deluxe does like a bit more fancy though.
I got the gold deluxe and wow it is beautiful! Both look great but the engravings are done top notch and really make the gun pop in my opinion.
I've definitely seen more wear on blued, parkerized, and cerakoted guns. Makes me wonder if that belief that it wears easier is a myth.
I would take gold plated over any other coating. It really surprised me how well the finish held up. Haven’t seen anyone else do a more than a few mags through one so mine is a one of one for now.
@@sacrificialscience4405 No kidding, I just ordered their blue, and gold mc p35, so I'm going to feel a lot more comfortable shooting it after watching this
@@censored4770 nice! I’d like to try one of those out as well.
How do you keep it clean like how do you keep the gold shine?
I still like it a lot. Really easy to clean with the slick finish. Pretty much just wipes right off.
@@sacrificialscience4405 yea i got 1 on a deal but trying to get a super bike should i sell it or keep it?
do you like this better or the beretta?>
As far as shootability, both are great. I do prefer the grip and decocker only option on the Beretta a little better though
@Sacrificial Science I already own the deluxe the gold one with the engraving. Really debating if I wanna get this one for shooting and just being rough with it
Looks like it came from Saddam Hussein's vault. Je,je,je... Beautiful replica of a 92. Excellent close ups and eye candy thank you. Stay safe, Cheers
Thank you for watching!
I own one..what do you use to clean the finger print residue oil with..I'm playing hell getting it all off with a sift rag?
I just use a terry cloth on mine. Takes a bit of wiping, but the prints will come off.
Man I was gonna get the regular one for my first gun but I’m half tempted to get the gold 😅 nahh I don’t wanna be THAT guy lmao maybe for my second one
I would totally recommend being “That Guy”, That Guy! 😂
Hard to ever find in stock or id get one asap
I got pretty lucky finding mine
Classic firearms has them in stock atm
@@MKemp-dr4xe not anymore just checked out of stock it says😂😂
@@Blahblah.44 I looked just now again, the engraved is out of stock but the non engraved (same one shown in this video) is listed as in stock for $560
Do it
You paid $550?
Yup. About a year ago
@@sacrificialscience4405 Nice.