Making a self-made table saw / Making a parallel guide with a double lock mechanism
ฝัง
- เผยแพร่เมื่อ 28 ต.ค. 2021
- The parallel guide for the table saw has been completed, and it is finally possible to pull vertically with your own table saw.
I still don't have split blades, safety covers, insert plates, and I want to make cross-cuts and expansion tables.
It seems that it is still far from a convincing table saw ...
Stay tuned for table saw making and other woodworking DIY videos.
Please read the detailed explanation of the video on the blog.
◆ www.naoppedielandschaft.work/...
-------------------------------------------------- ----------------------
List of related videos
-------------------------------------------------- ----------------------
◆◆ Make your own table saw with Makita circular saw / Main body production
• 【木工DIY】マキタの丸ノコで自作のテーブル...
◆ Making your own table saw / Make 4 modifications to Makita's circular saw
• 自作のテーブルソー作り/マキタの丸ノコに4つ...
◆ Make a strong stand with two-by material and plywood for your own table saw
• 【木工DIY】自作のテーブルソー用にツーバイ...
◆ How to make a removable miter saw
• 【卓上スライド丸ノコ用】狭い作業部屋に便利、...
◆ Make an easy-to-use marking gauge with 3 types of precious wood
• 3種の銘木で使いやすいマーキングゲージを作る
◆ Make a guided trimmer table with a dust collecting function [Part.1]
• 集塵機能のあるガイド付きトリマーテーブルを作...
-------------------------------------------------- ----------------------
BLOG
-------------------------------------------------- ----------------------
★ "Home-building DIY blog"
www.naoppedielandschaft.work/
-------------------------------------------------- ----------------------
SNS
-------------------------------------------------- ----------------------
Real-time DIY status etc. are mainly distributed on Twitter.
Thank you for following me.
◆ [twitter]
/ naoppeman
◆ [instagram]
/ naotoworkingstudio
◆ [TikTok]
/ naotoworkingstudio
-------------------------------------------------- ----------------------
Tools and tools used in the video
-------------------------------------------------- ----------------------
■ Desktop slide circular saw
amzn.to/3oFvWKs
■ Impact driver
amzn.to/2L2FeO2
■ Electric drill
amzn.to/3zEK5ML
■ Desktop drilling machine
amzn.to/3iJv5Yx
■ Trimmer
amzn.to/3oqgzbn
■ Dust collector
amzn.to/2VdvZTM
■ Boa bit set
amzn.to/3uCtrfr
■ Snap ring pliers
amzn.to/3oQrLOt
■ Watco oil
amzn.to/3ecUtBA
■ Bond tight
amzn.to/2xcuE45
■ T slot rail
amzn.to/3B66zrj
-------------------------------------------------- ----------------------
Photographic Equipment
-------------------------------------------------- ----------------------
Camera: amzn.to/3pr734n
Lens: amzn.to/3C148Ht
Mic: amzn.to/2NfbJxl
#NaotoWorkingStudio #Tablesawparallelguide - แนวปฏิบัติและการใช้ชีวิต
NAOTO nice skills, very enjoyable. Actually, I have to put my my tablesaw back together.
Very nice and clean job. ,,👌👏👏👏👏
Good job brother...👍👍👍
Je te félicite, très bon travail, bien fini, une touche professionnelle. Chapeau 🇲🇦🇲🇦🇲🇦🇲🇦
Q
@teabanghai7604 ee
good job man
最近インスタグラムでの活動に力を入れています。
onl.la/QWgzdD2
DIYを始めたばかり、始めようと思っている方へDIYをやり方を分かりやすくお伝えしています。
月、水、金曜日週3回の投稿で更新中です。
DIYを少しでも学びたい、上達したいと思っている方はぜひ覗いてみてください。
Your wood fixed to the aluminum fence with just adhesive tape will loosen over time. The aluminum fence sliding directly over the aluminum plates can wear them both out. Leave a space of a few millimeters between the wood that is on the aluminum fence and the aluminum of your table so that the wood dust has a place to lodge and does not cause wrong cuts in the piece to be cut by the dust accumulation.
素晴らしい👍
頑丈で、平滑で、ホールド性も高い‼️
両端で切断幅もバッチリなんですよね❓
物凄く羨ましいです‼️
私もこの先、テーブルソーの天板を作り替える事を考えてます。そうするとガイドも当然ながら作り直し🌈なるので、、その時は参考にさせてくださいね😉👍✨🌈⤴️⤴️⤴️
切断した精度も問題なしでしたね👍
手前の板を固定したときにしっかりと並行ガイドを垂直に合わせてくれるのでここらへんはバッチリです😤
ぜひぜひ参考にしてください!
ただマコーレの木板は職場で準備したのでチート使ってますよ笑
Watco was a good choice..
My friend congratulation👏👏👏👏👏👏👏👏👏👏👏👍
WOW fantastic. But needs more power and cant do dado or bevel cuts.
Muy buena como guía
I need to make table saw but I do not have cross cut saw, I need to make cross cut saw - but I need to have table saw
Супер 👍👍👍👍
Why do you install t track on front side only ? If you add it on backside it should be more stable.
Guess a Great video for no plan and crafting on the fly.. who knows where will end or goal just a Journey of clips of Crafting..
Плохой упор, нужно доработать.
You can retrofit a riving knife
Definitely! Otherwise we might not get anymore video’s!!😊
Поздравьте меня! Я 20 МИНУТ БЕЗ ЗВУКА СМОТРЕЛ КАК ОН ЗАГИБАЕТ АЛЮМИНИЙ! Я ГОТОВ ПОСМОТРЕТЬ ЕЩЁ 3 ЧАС КАК ОН ИХ БУДЕТ СЧИТАТЬ! 😁 🤝
Столько всего для одного упора не рентабельность
Nice, but no riving knife? That's an accident waiting to happen.
Lol.. been woodworking 50 years, no riving knife.. Never had a accident.. you just have to be careful and watch what you are doing..