Ini channel go internasional loh....banyak yg komen dari luar negeri....Semoga terus berkarya ya mas...saya seneng lihat kontem2 dari anda....pengen ditiru semua....2 jempol utk anda mas...
Fantastic creative craftsman without use of fancy shmancy equipment and totally down to earth. HMR appears to not be available in my area however and its better than MDF for sure.... Overall about as wonderful as a TH-cam DIY creation as can be expected. Clearly this is an engineer who does woodworking!
VERY VERY well done and YES you should be happy with result! You are a very creative designer of tools and jigs and your camera and editing work is superb. I enjoy watching! Your entire DIY table saw project is amazing work! Thank you for your time and sharing your creativity with us! Peace be with you!
This is a really good video of a really well done project. I usually don't like that kind of artificial voice, but you used it only as needed to add to the video. Turns out it's good for that. Nice sound track, too.
I made a similar one last year. I put my spirit level along the blade and scribed a fine line across the table in line with the blade to use as a reference datum. To do this you need a new blade that is absolutely true, I checked the blade with a dial gauge first. I also checked that the slot was in line with the blade with the dial gauge at the same time.
Hi love this build and planning on making this. I have a question though as I may be missing something. Why is there such a big gap where the angled steel sits 03:12? Wouldn't it be better to just be the thickness of the steel (3mm) so it sits in tight so there is no play at all?
great point, my first idea i will add wheel bearing too on that rail make more stable slide and give bold and left and right steel for setup parallel fence but i skip that. thank you for suggestion
i had to make one myself. the one that came with my saw had no track and before EVERY cut, i had to measure front and back to make sure it wasnt toed in or out (it would be, always).
Listening my friend wood and wheels I’m happy whit the design I see other people making differently but this one just perfect I don’t like to go and pay 300 o400 pounds I say pounds because I’m from Colombia but I live in London go to Colombia see how people there make fence for table saws first the table is like wonky and the fence nothing like this one any way for me is very nice actually I started making my own on little different but very close thanks my friends good luck and goodbye 👍👍👍🙏
Theres a lot of wiggle between near and far edges. You'd have to measure each, the check square every time - right? Same as OEM fence? Wouldnt it be better to, after first lip, install or route a T/miter track on that, square n/f mitre guides, and it would glide evenly?
Pertama nemu chanel ini tak kira punya luar negri lho,dan fance gitu full nylon setelah sebelumnya top tablenya juga pikir full metal, oya nylon+ metal itu dpt dmna dan klo nyari d toped kata kuncinya apa??
Makasih banyak udh support channel sederhana ini mas, klo di online cariya namya nylon sheet ato PE sheet, klo metalya bs beli ditoko aluminium bil aj cari aluminium sheet klo ini pake yg tebel asli 2mm grade A jdi ckp keras ada yg dibwah itu lbh murah
Namaya kayu pasti ada ngembangya jga, cm lbh tahan am air, klo lembab jamurya cm dipermukaan aj warna putih dilap aj ilang, tp selama sy pke hmr gk pernah bermasalah
@@plywoodworking iya om. Saya punya stok potongan kecil. Dah lama beli. Begitu mau d pake,saya ukur kok jadi tebel. Saya kira sigmat saya rusak,soal nya pernah jatoh. Oke deh om,semangat ngonten. 👍
Sy beli biasaya lgsng banyak cm ukuran gedhe diberdiriin klo naruh jgn ditidurin klo gk mekar pasti, kena panas am dingin lembab bs melengkung , jdi tebel ato jamuran
Hey there buddy, hope you and the family are good. I have a Dewalt contractor saw- model DW745 and want to install a longer fence on it. I've built the saw into my work surface /assembly table so I have more room for a bigger fence. Do you think a design like yours would work? I'm trying to figure out how to keep the end farthest from the front from flexing. Do you have any suggestions? Thanks for what you do!!
you can add 6mm-9mm MDF or another material on original fence but the material must flatten and give nylon or PE sheet after that. You build more longer and bigger fence. for locking system i think DWE 745 lock good than my table saw DWE 7470
The reason I want a new fence on my saw is so that I can easily move my fence to a presise and accurate position. Which means it has to have tape measure that I can trust and read.
And, it has to default to square always. This one appears to have the default far & near wiggle when moved (so, always needs tweaking to check square and same along entire lenght).
I can't find The Free Plans for nothing. On Facebook I located Drive, but I didn't find any folder that had New Fence. Can you help me? Congratulations on the incredible project.
Just a friendly tip. You don't square your fence with the blade, you square it to the miter slot. The blade can be out of square with the miter slot which is another issue all together. The miter slots are perfectly square with the table top. I'm not going to put down the build, it came out very nice and you should be happy with it. I would just make a few changes. But over all, it's good.
I think all right, before i set the fence with the blade, i set up the blade straight with a miter slot. In this video i only need to set up a fence with the blade.
HMR (high moisture resistant) this material more flatten, durable and waterproof than MDF. In my country only available green color but i see have many options color
Hi how are you can I ask you what are you located sometime I see a lot of stuff you use I can't find it around here in the United States thanks you do a great job by the way
@plywoodworking thank you you are a great man and you doing good job very smart I'm just like you I create a lot of stuff on my own I do everything from woodworking what are cars homes Electronics race cars anything you think of it I'm good you called me MacGyver anyways so thanks man have a good day .
Great work, but I noticed at 12:51 that your fence is not sliding perfectly straight to the blade, there was a non-straight movement at the top of the fence when you pushed toward the blade.
17:04 There's nearly a 1/4" gap between your work piece and the blade on the exit side and again at 17:38 you can see the work piece wiggle. Is that even square bro??
Nice, but you need to build yourself a better push stick than the orange thing you are using. Make one that holds the stock flat so you keep positive control. I have seen a lot of near misses with the orange type.
CORRECT ME IF I'M WRONG BUT IN THE MEASUREMENTS YOU SHOW LENGTH OF 720MM AND ON THE SAME PIECE THE WIDTH IS 940MM BUT THE WIDTH IS FAR FAR SHORTER IN THE PICTURES,. LAST I CHECKED 940MM IS > THEN 720MM.
I dunno about 15$-18$ lol. A sheet of MDF if 50$. But compared to a store bought precision fence system, such as biesemeyer, this is most definitely worth it
I was really surprised how much cutting power (and torque) this saw had out of the box. I've used other (10" saws) previously and was pretty surprised with the speed and cutting ability of this Dewalt saw.I have bolted mine to a table to minimize movement which I highly recommend.This is a Great saw th-cam.com/users/postUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe with a light to see your cutting line (not a laser line).I'd recommend this saw fro anyone looking to upgrade from a 10" miter saw.
This is absolutely the best most detailed home made fence I've ever seen. I'll be using this to upgrade my horrible one that came with my saw. Thanks!
thank you 👍👍
Ini channel go internasional loh....banyak yg komen dari luar negeri....Semoga terus berkarya ya mas...saya seneng lihat kontem2 dari anda....pengen ditiru semua....2 jempol utk anda mas...
I built mine put of some scrap red oak I had . A lot harder and tougher then press board . I like your build good job 👍
glad hear that, thank you very much!
Fantastic creative craftsman without use of fancy shmancy equipment and totally down to earth. HMR appears to not be available in my area however and its better than MDF for sure.... Overall about as wonderful as a TH-cam DIY creation as can be expected. Clearly this is an engineer who does woodworking!
Good job thanks I say hello from London and Colombia 👍👍🙏
Thanks and welcome
lovely job mate enjoy brother greetings from australia
Thank you! Cheers!
Istimewa Om, mudah2an bisa d praktekkan kapan2... 👍👍👍
thank you very much!!!
VERY VERY well done and YES you should be happy with result! You are a very creative designer of tools and jigs and your camera and editing work is superb. I enjoy watching! Your entire DIY table saw project is amazing work! Thank you for your time and sharing your creativity with us! Peace be with you!
thank you very much 👍glad you like my editing video 😊
Brilliant work.
thank you very much!!!!
Çok güzel ürünler yapıyorsunuz ellerinize sağlık
Wow bery bery good Boss thanks kyou
Thank you too
Nice job. It looks like it came from a factor
Always love your works, very inspiring. Terima kasih sudah berbagi 👍
thank you very much!!!
Fantastic work, dude! Nicely done! 😃
Stay safe there with your family! 🖖😊
thank you very much !!
this is great! how's it held up since you built it? is there anything you'd do differently if you were building another one?
thank you very much!! sorry for late reply
hi! Did you have a link for your toggle clamp? I search a lot but I didn't find one wich close like yours! Thanks!
Super cool 👍👍👍👍👍👍👍
thank you very much 😊
Please let me know if the plate you glued on the surface is stainless steel or aluminum
Aluminum grade A coz the rest aluminum i use for making a track saw.
This is a really good video of a really well done project. I usually don't like that kind of artificial voice, but you used it only as needed to add to the video. Turns out it's good for that. Nice sound track, too.
Thank you very much
I made a similar one last year. I put my spirit level along the blade and scribed a fine line across the table in line with the blade to use as a reference datum. To do this you need a new blade that is absolutely true, I checked the blade with a dial gauge first.
I also checked that the slot was in line with the blade with the dial gauge at the same time.
thank you very much!!!
Hi love this build and planning on making this. I have a question though as I may be missing something. Why is there such a big gap where the angled steel sits 03:12? Wouldn't it be better to just be the thickness of the steel (3mm) so it sits in tight so there is no play at all?
great point, my first idea i will add wheel bearing too on that rail make more stable slide and give bold and left and right steel for setup parallel fence but i skip that. thank you for suggestion
Very, very good!
Thank you very much, hope can give inspired
Great, God Bless!
thank you very much!!!
Keep creative.. 👍
Thank you! Cheers!😁
i had to make one myself. the one that came with my saw had no track and before EVERY cut, i had to measure front and back to make sure it wasnt toed in or out (it would be, always).
Excelente!! Gracias!👏👏😉
thank you very much !!
Very nice job!!!
thank you very much!!!
Listening my friend wood and wheels I’m happy whit the design I see other people making differently but this one just perfect I don’t like to go and pay 300 o400 pounds I say pounds because I’m from Colombia but I live in London go to Colombia see how people there make fence for table saws first the table is like wonky and the fence nothing like this one any way for me is very nice actually I started making my own on little different but very close thanks my friends good luck and goodbye 👍👍👍🙏
thank you very much glad you like this
I wish you could tell where you get your tool and plastic wheels etc. but I do love watching your stuff
Thank you very much 👍👍
Nice job. It looks like it came from a factory!!! 👍👍👍
thank you very much!!!
I'm really happy for you.
thank you very much 👌😊👍
Y DONDE COMPRO TODOLO QUE SE NECESITA
Well done, fantastic design 👍
thank you very much !!
This is the way brothers
thank you very much 👍😊👌
Hi what size is the nylon sheet for the bottom?
1.5mm thickness
Nice job
Thank you! Cheers!
what was the device you used to draw the straight line?
great project, thank you, where can I find the the lever you use to block the fence?
Amazon - here you go my friend:
www.amazon.co.uk/gp/product/B07NW4SB3Y/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
thank you very much!!!
Theres a lot of wiggle between near and far edges. You'd have to measure each, the check square every time - right? Same as OEM fence? Wouldnt it be better to, after first lip, install or route a T/miter track on that, square n/f mitre guides, and it would glide evenly?
Pertama nemu chanel ini tak kira punya luar negri lho,dan fance gitu full nylon setelah sebelumnya top tablenya juga pikir full metal, oya nylon+ metal itu dpt dmna dan klo nyari d toped kata kuncinya apa??
Makasih banyak udh support channel sederhana ini mas, klo di online cariya namya nylon sheet ato PE sheet, klo metalya bs beli ditoko aluminium bil aj cari aluminium sheet klo ini pake yg tebel asli 2mm grade A jdi ckp keras ada yg dibwah itu lbh murah
what is the glue that you use to bond alluminum?., also nylon sheet sir to your mdf?
Pvac glue type, that glue multifunction but need high press for good result
ty sir for fast reply.,I've been watching most of your video when i needed idea.,.
@@plywoodworking sir one more thing, what glue to use on mdf to mdf?
Papan hmr bisa merekah juga ya om. Padahal cuma kecipratan aer. Trus kalo d tempat lembab jadi jamuran,merekah juga,nambah 1-2mm.
Namaya kayu pasti ada ngembangya jga, cm lbh tahan am air, klo lembab jamurya cm dipermukaan aj warna putih dilap aj ilang, tp selama sy pke hmr gk pernah bermasalah
@@plywoodworking iya om. Saya punya stok potongan kecil. Dah lama beli. Begitu mau d pake,saya ukur kok jadi tebel. Saya kira sigmat saya rusak,soal nya pernah jatoh.
Oke deh om,semangat ngonten. 👍
Sy beli biasaya lgsng banyak cm ukuran gedhe diberdiriin klo naruh jgn ditidurin klo gk mekar pasti, kena panas am dingin lembab bs melengkung , jdi tebel ato jamuran
@@plywoodworking makasi om. 🙏
Good job sır.
Please next project will be over Arm Dust Collection..
Good idea, thank you for suggestion. First i will upgrade my dust collector system first make more bigger motor
Mas, ada link utk bearing utk fence nya?
Namaya roda gitsay, cari aj ada 3 ukuran klo ini 1inchi, cari yg model rata adanyg model v
Nice Job.. Istimewa banget hasilnya.. Itu Nylon sheet yg Tipisnya ukuran brp mas ?
Makasih banyak mas, cari cara yg murah mas tp hasilya ttp max, asli pusing mikirya. Nylonya yg tipis itu 2mm tebelya bs pake yg 3mm klo mau
WHAT DID YOU USE FOR THE WHEEL AND WHERE DID YOU GET IT
The wheel is apart from the storage door closet (sliding door)
Herkezin ihtiyacı olan ürünler
Hey there buddy, hope you and the family are good. I have a Dewalt contractor saw- model DW745 and want to install a longer fence on it. I've built the saw into my work surface /assembly table so I have more room for a bigger fence. Do you think a design like yours would work? I'm trying to figure out how to keep the end farthest from the front from flexing. Do you have any suggestions? Thanks for what you do!!
you can add 6mm-9mm MDF or another material on original fence but the material must flatten and give nylon or PE sheet after that. You build more longer and bigger fence. for locking system i think DWE 745 lock good than my table saw DWE 7470
bang, beli toggle clamp yg karet hitam besar ada linknya?
saolx saya nemu atau dsni walau yg body besar, karetx ttp kecil
Karetya itu dimodif sndiri pke karetya kaki kursi beli ditoko mebel ato online banyak kok, dibor am dimodif
@@plywoodworking owalah 😆, oke trims infonya bang
Siap sama2 smoga bermanfaat
Where to download this plan guru?
do you have a link for the circular saw guide you used in this video?
th-cam.com/video/4D22HSb-jx8/w-d-xo.html
How do I get the plans ?
Hello, i'm one of your followers and I really like what you do; may I have the reference of the clamp you used for this fence ? Thank you very much.
do you mean toggle clamp, i buy on local store. wait i will search online if get link i will send you. Thank you very for support my channel 😊👍
yes I spoke about toogle clamp; thanks for answer @@plywoodworking
The reason I want a new fence on my saw is so that I can easily move my fence to a presise and accurate position. Which means it has to have tape measure that I can trust and read.
thank you very much, i will upgrade again with guide measure tape for easy use 😊👍👍
And, it has to default to square always. This one appears to have the default far & near wiggle when moved (so, always needs tweaking to check square and same along entire lenght).
I have a question what is the name or type of clamp used for the fence?
toggle clamp
I can't find The Free Plans for nothing. On Facebook I located Drive, but I didn't find any folder that had New Fence. Can you help me? Congratulations on the incredible project.
Plan for this project not yet ready, missing some measurement parts. I will upload it if it's all ready.
Алюминий не пачкает заготовки?
Thank you very much 👍👍
Where can I get the wheel bearings
This is bearing for storage sliding door, maybe you can get similar like that
Just a friendly tip. You don't square your fence with the blade, you square it to the miter slot. The blade can be out of square with the miter slot which is another issue all together. The miter slots are perfectly square with the table top. I'm not going to put down the build, it came out very nice and you should be happy with it. I would just make a few changes. But over all, it's good.
Actually, with any saw, the proper procedure is to align the blade to the miter slot, then align the fence to the miter slot.
@@davidpeters8813 Exactly. Either way, you never align to the blade.
I think all right, before i set the fence with the blade, i set up the blade straight with a miter slot. In this video i only need to set up a fence with the blade.
@@plywoodworking Unless the blade was kicked out of alignment. Miter track cannot move.
@@Oops-IMeantToDoThat you can setup or calibration again, see on 9:28
What is the type of the bearing wheel? thanks so much
This is bearing the closet door. have many types of bearings, try to find similar.
@@plywoodworking In the US, screen door repair wheels and sliding patio door repair wheels work.
dua sisi kanan kiri yg warna putih bahan apa namanya mas...toko apa yg jual info mas
Tokoya lupa udh lama beli namaya nylone sheet macem2 hargaya. Cm lupa brpa dlu beli. Cb ketik aj nylone sheet ato teflone sheet
nice to watch, but too complicated to Do It Myself
Güzel çalışma👏
thank you very much!!!
What do you call the clamp you use on the end ? Do you have a link for product purchase ?
Toggle clamp, i buy on locall store
Could you please tell me what HMR is in the UK it looks like mdf.
HMR (high moisture resistant) this material more flatten, durable and waterproof than MDF. In my country only available green color but i see have many options color
I can't find the plans for this on your drive.
Hi how are you can I ask you what are you located sometime I see a lot of stuff you use I can't find it around here in the United States thanks you do a great job by the way
i am from indonesia, almost all part i buy online on marketplace
@plywoodworking thank you you are a great man and you doing good job very smart I'm just like you I create a lot of stuff on my own I do everything from woodworking what are cars homes Electronics race cars anything you think of it I'm good you called me MacGyver anyways so thanks man have a good day .
By the way I am in in the United States California I've been following you for a long time.
What is the size of the tongle clamp
Where did you buy the wheels?
thank you very much!!!
Great work, but I noticed at 12:51 that your fence is not sliding perfectly straight to the blade, there was a non-straight movement at the top of the fence when you pushed toward the blade.
thank you very much!!!
thats completely normal so long as when it locks it squares itself
13:32 itu Pe Board kak?
Nylon sheet
17:04 There's nearly a 1/4" gap between your work piece and the blade on the exit side and again at 17:38 you can see the work piece wiggle. Is that even square bro??
all work perfectly until now, i set the fence not tight on edge coz avoid kick back.
What is that marking gauge?
this is fence
Hebat uy
thank you very much 👍😊👌
melayani pesanan fence gk gan?
Heheh gk mas maap cm berbagi tutorial aj😁, gk keburu ngerjainya
Quanto custa uma dessa aí ? ???
thank you very much!!!
I’ve just purchased a Makita ( not cheap ) table saw and the fence is a joke! So i shall be attempting something similar..
happy hear that, thank you very much
Yours is beautifully made, i congratulate you and your craftsmanship..
Thank you very much! hope you can fix the table saw fence☺
Nice, but you need to build yourself a better push stick than the orange thing you are using. Make one that holds the stock flat so you keep positive control. I have seen a lot of near misses with the orange type.
Cool idea, just improve made more safety push stick 👍👍
On your exploded view of the fence @ 4:35 mark... shouldn't the end piece be 67mm X 94mm? I don't think "940mm" is correct.
thank you for correction, i made mistake typing
Good design but I think you supost to clean the rust from the things you use to make this fence
thank you very much!! sorry for late reply
On your exploded view you have a typo 940mm should it be 94mm ? good job pal
human eror, thank you very much !!
CORRECT ME IF I'M WRONG BUT IN THE MEASUREMENTS YOU SHOW LENGTH OF 720MM AND ON THE SAME PIECE THE WIDTH IS 940MM BUT THE WIDTH IS FAR FAR SHORTER IN THE PICTURES,. LAST I CHECKED 940MM IS > THEN 720MM.
yup you right i make miss typo measurement. thank you for correction!! 👍😊
It would be much better with subtitles instead with computer generated voice.
Additionally - plesa make some introduction (what, why and how...).
thank you very much!! sorry for late reply
👏👏👏👏👏👍👍😍😍
thank you very much!!
мастер брат
you may have possibly built the most expensive fence ever made, lol
i estimation total build this fence only $15-18
I dunno about 15$-18$ lol. A sheet of MDF if 50$. But compared to a store bought precision fence system, such as biesemeyer, this is most definitely worth it
18:16
thank you very much!! sorry for late reply
⭐🙂👍
thank you very much 👌😊👍
I was really surprised how much cutting power (and torque) this saw had out of the box. I've used other (10" saws) previously and was pretty surprised with the speed and cutting ability of this Dewalt saw.I have bolted mine to a table to minimize movement which I highly recommend.This is a Great saw th-cam.com/users/postUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe with a light to see your cutting line (not a laser line).I'd recommend this saw fro anyone looking to upgrade from a 10" miter saw.
The use a an Ai voice, is super annoying.
Thank you
Look ll
What's with the poofy glove?
i have some injury on thumb