Don't buy it! 26 useful woodworking hacks that will save you money.
ฝัง
- เผยแพร่เมื่อ 3 พ.ค. 2024
- I will introduce useful tools and tricks for woodworking and crafts.
All of them use inexpensive materials sold at home centers, so you can save money.
Plan
jsk-koubou.stores.jp/
0:00 [No.1 Spring Clamp Vise]
1:55 [No.2 Quick clamp made from PVC]
4:51 [No.3 Magnet cleaner made with putty]
6:02 [No.4 Hack for adhesive using screws]
6:18 [No.5 Hack using L-shaped hook]
6:32 [No.6 Drill depth guide using cable ties]
7:00 [No.7 Paint stirring using cable ties]
7:36 [No.8 Brush using clip and sponge]
8:04 [No.9 Paint cap made from plastic bottles]
8:34 [No.10 Vacuum device using a syringe]
10:36 [No.11 Simple band clamp]
11:55 [No.12 Sharpening jig using screws and bearings]
13:51 [No.13 Storage hack that reuses waste materials]
14:14 [No.14 Strong adhesive using cement]
15:09 [No.15 Suction-type sandblaster made from water pipes]
16:54 [No.16 Zinc plating using manganese batteries]
18:32 [No.17 Easy-to-make circular saw cutting guide]
20:27 [No.18 Circle cut jig]
22:41 [No.19 Cord reel made from recycled waste materials]
26:14 [No.20 Feather board using a cutting board]
28:03 [No.21 Self-made center finder]
29:45 [No.22 Improvement of center finder]
30:30 [No.23 Drill sharpener]
34:16 [No.24 Simple styrofoam cutter]
35:50 [No.25 Homemade line laser]
27:29 [No.26 Work vise using clamp] - แนวปฏิบัติและการใช้ชีวิต
If you like the video, please introduce it to your friends and social media !
Wonderful! I've seen them all already but it's great to have them gathered in a single video. You are always produce the best quality both of tools and videos! Thank you! PS. May I prompt you to correct the timestamp of your last chapter (No26)?
For the circular saw cutting jig the piece I’m cutting falls out when I flip it over. Need some sort of modification to provide support under the piece.
Either a bungee cord or some L brackets that can adjust for the thickness of the wood being cut.
@@sburgos9621 thank you for the advice.
Needs improvement.
Me gusta.ese.video.un.monton
Never subscribed off of someone's first video before but i legitimately cannot cope with this level of complex simplicity, what the HELL man??
This is what every other DIY video I've ever seen should aspire to. Blown away.
Sir, my hats off to you!! I have watched you for years. And yet, you never fail to amaze me with your creative mind, your attention to detail and your craftsmanship! Bravo!!
For a long time, I have had a strong suspicion that JSK is a genius engineer!
No. 22 is brilliant! Thank you for sharing this one. I will be making my own version soon.
Genius engineer indeed. I wish you were my uncle or neighbor so I can reach out on any problem I have and can consult you anytime. I love problem solving, and you inspire me big time! I love your precision and attention to details!
Vielen Dank für das Video! Auch nach 42 Jahren als gelernter Werkzeugmechaniker und Versuchsmechaniker ist es mir eine Freude bei deinen Videos immer noch dazu zu lernen. Ein alter Meister hat mir früher schon gesagt, erst wenn alle 5 Finger gleich lang sind, habe ich ausgelernt. Grüße aus Deutschland….Uwe
I'm sure I've told you this before, but your work is pure art sir! Everything is so precise and creative. Watching your videos puts me at ease, thank you for sharing, and keep up the amazing work!
Un grand respect pour la qualité de votre travail, un grand merci du nord de la France.
I have learnt so much from your videos, thank you from Canada
何がすごいって、使っている作業台がものすごい!
Always amazed by your work and abilities! Another great video thanks for sharing!
Nice to see you back with a lot of great ideas! Thank you for sharing!
Your creativity and dedication is god tier my friend. Thank you for sharing it with us.
He just never stops!! Ingenuity squared! 😊
Muy ingeniosos, gracias por compartir tus ideas muy útiles.
Parabéns, sempre com ótimas ideias 🎉
Toujours aussi plaisant à regarder, merci 🙏👍
Много полезного и поучительно. Главное, всё работает и сделано руками, не на заводе,отличное качество.
Многие идеи просто повторить. Этим Автор делится добром, дарит его другим людям.
Спасибо, добра всем!
Really like your tips and trick on how to make such useful tools and helpers.
Thank you for each of your videos! 👍💪✌
I have been following you for years and I want to say: You never disappoint!!
Glad to see another one of your amazing videos keep up the great work
So many good ideas, I really appreciate it! Thank you! 🙏
アイデアもすごいが設備もスゴイ
コメントありがとうございます
是非DIYに役立ててください
This video has brought joy to me.
Wow, I’m going to use some of these tips for myself! Very informative and helpful tips!
Very creative diy video
You are truly amazing!😮
The sharpening drill is really great, I will make it. Thank you.
Toujours aussi instructif à regarder, merci.
Спасибо! Все советы полезные! Многие мне неизвестны. Как всегда у мастера чисто и аккуратно!
Тоже удивился
I always find your stuff interesting if not useful. In short I like very much what you do. Thank you.
AMAZING IDEAS, CRAFTMANSHIP and how do you keep your shop so tidy?😊
Best 28 minutes I’ve spent in quite a while.
quando o assunto é a marcenaria e perfeição o cara é bom mesmo!
So many! I'll have to watch again. Thanks.
Parabéns. Ótimas ideias. Bom dia. Falando de São Paulo Brasil 🇧🇷
Abraços brother.
👏👏👏🤘👊🇧🇷🇧🇷🇧🇷🇧🇷
Ok, I'm just going to say it. I thought you were just showing off stupid "life hacks" similar to 5 minute crafts but actually these are really freaking clever! I'm not going to rag on you for these because next time I do some work with wood I'm 100% trying the glue spreader trick! But I thought of something similar for the magnet tool when I was a kid but it involved modifying a dust sweeper with a plastic shell. Your idea for the magnet is a lot more simple and easy to do than my idea was! My idea was more for cleaning up metal dust from a grinder to help clean the garage after my dad did any kind of work in it. You earned a like from me!
Some great ideas there. Really great content for inspiration. Haven't watched you in a bit but I'm telling you what, everytime I do I get a hankering to get out in the old wood shop and start tinkering!!! Lol👍
Excelentes criações que facilitam nosso dia a dia
Cup of tea, sit down and enjoy 40 mins playing "Guess what it is". Brilliant!
Long time ago that i seen so much good ideas 👍🏻👍🏻👍🏻
Thanks
Thanks 👍
Magnifique! Thank you for sharing those tips.😊
Super, avec un peu de matériel et beaucoup d'idées, c'est génial. 👍
Thank you so much for chapters/time information and expeditious presentation/editing.
Harika fikirler , mükkemmel ustalık.. Teşekkürler.. 👍🙏
作業室と機材が揃えば何でも出来るよ😆
Mükemmel Fikirler ❤🙏
Others would have made four videos out of it. Nit everything pure gold but a lot if ut very useful and ideas for transferring some ideas. 👍
治具を作ったり必要と思ったことのない人には便利さが理解できないかもしれませんが、モノづくりしている人には刺さる動画でした
紹介されている物が直接必要なくても、アイデアやインスピレーションなどを想起させてくれます
コメントありがとうございます。
参考にしていただけると嬉しいです。
@@jisakukobo幸せな人生をお祈りします……ありがとう
🔴ムスリムは創造主である唯一の真の神へ従う者だ
🔵我々は唯一の御方、創造主、真実の神(アッラー)のみを崇拝しなければならない。
🔴者を援助、食物を与え、支えるように勧めている。
🔵イスラームは、人種や肌の色や国籍に関わらず全ての人間は平等であると教えている。
🔴イスラームとは唯一の真の神であり創造主へと従うという意味だ。
🔵ムハンマドは40歳になった時に、天使ガブリエルを通じて啓示を受けた。
🔴預言者ムハンマドは述べた。「もし、ある男がイエスを信じ、私(ムハンマド)を信じるなら、彼は二倍の報酬を得るだろう。」
🔵イスラームは私達の両親と高齢者を敬い、気に掛けるように命じている。
🔴彼は人種、肌の色または国籍に関わらず全ての人間は平等であると言う。
🔵し主の許しを乞うこと。己を愛するように人を愛すこと。
🔴全体を異教と偶像崇拝から、唯一の神(アッラー)へのタウヒードと従順へと変えた
🔵イスラームは弱者、貧者、困窮者や障がい者を援助、食物を与え、支えるように訴えている。
Sin dudas, el mejor video en su genero que he visto ❤
Glad to see your video! You still have the cleanest shop I've ever seen!
Grazie molto bravo👍💪
Excelente trabajo. Saludos desde Uruguay
thanks!
Absolutely amazing
Long time no see my friend... welcome back with new mastermind ideas
Why didn’t I think of that! Well done, sir!🙏
Really nice design. Very inventive.
Very good and useful video
Thank You
Super class👍
I want to see you make multiple woodworking hacks with 1 × 1 inches square feet metal 🤗👍
Bonjour j’ai vue avec votre rabot les jolis copeaux de bois il t’il possible de garder c’est joli copeaux de les coller sur une planche feuille par feuille et de voire comment sa se passe si sa donne de jolis dessins de grain peux faire de jolis choses avec 👍🙋🏻♂️merci beaucoup
Muito bom, parabéns !
全部すごすぎ
ペンキ缶とペットボトルのやつ感動した
コメントありがとうございます。
何を! どれを観ても!! 天才!!!ですね。
コメントありがとうございます
是非DIYに役立ててください
1@@jisakukobo
👍💯💪 умные идеи всегда придумывают творческие люди. Смотришь на их идеи, они такие простые и не затратные.🙄❤️😀
i felt my brain gotten 10 times bigger from watching these lol
Good idea when the mind have good player
Grande sei fortissimo
تسلم ايدك يا هندسه الله ينور عليك كنت عايز تعمل فكره لسلم 4متر مقاساته ونوع الخشب ايه وكل تفاصيله
كل فكره مميزه ممكن ان تجعل المحب للعمل ان يتنوع يكشف الافضل الاحسن ومتنوع للمزيد وهو افضل وقت ثمين
Great, a genius
is simple when you have all to make it!😄😄
The fun of this is that nothing he's building makes ANY sense until you see what it's for and then it's like WHOA
Clever Ideas 👍
Классно✊Супер🤟
Благодарю за показ
Булатный лайк мой👍
似たような寄せ集め動画をよく見かけますが
この方は一味も二味も違いますね
全て実用的
しかし かんながけが上手すぎるんですよ…プロの様に‥(by大工)
Good job!
genial gracias!!!!
Super You ldea is Very simple and Very useful.
Удлинитель в канистре, это просто ван лав❤
His hacks are useful, compared to the endless useless hacks other hacks publish on yt
Nice work as always! It makes a little proud that my honing jig [No.12] has made it into on of your videos!
Admiro tus trabajos precisos y todas tus herramientas impecables
This is very good video 😀😃😄
Хорошие идеи👍👍👍❤️🙏
حقاً فيديو اكثر من رائع
Super! Danke!
26 Times thank you and bravo: Sorry no joke today.
Hallo, ich hoffe, du bist immer gut . Es ist lange her, dass du ein Video gepostet hast.
Vielen Dank, dass Sie sich das Video angesehen haben.
Ich stehe vor einer neuen Herausforderung und habe daher keine Zeit, Videos zu aktualisieren.
Ich werde mein Bestes tun, um die Aktualisierung fortzusetzen.
@@jisakukoboвсегда рады😊 Вашим ценным.видео👍
Interesting ideas
No. 6 Electrical tape / insulating tape / narrow masking tape do the job just as well.
hola en el video del galvanizado, no se usa lo negro de la pila o bateria? , y despues cuando pones el detergente en el contenedor plastico , mostras que agregas detergente y despues aparece el nivel mucho mas alto que le agregaste?
CORRECTED - EDITED - FORMATTED CHAPTER LIST
00:00 No. 1 Spring Clamp Vise
01:55 No. 2 Quick clamp made from PVC
04:51 No. 3 Magnet cleaner made with putty
06:02 No. 4 Hack for adhesive using screws
06:18 No. 5 Hack using L-shaped hook
06:32 No. 6 Drill depth guide using cable ties
07:00 No. 7 Paint stirring using cable ties
07:36 No. 8 Brush using clip and sponge
08:04 No. 9 Paint cap made from plastic bottles
08:34 No.10 Vacuum device using a syringe
10:36 No.11 Simple band clamp
11:55 No.12 Sharpening jig using screws and bearings
13:51 No.13 Storage hack that reuses waste materials
14:14 No.14 Strong adhesive using cement
15:09 No.15 Suction-type sandblaster made from water pipes
16:54 No.16 Zinc plating using manganese batteries
18:32 No.17 Easy-to-make circular saw cutting guide
20:27 No.18 Circle cut jig
22:41 No.19 Cord reel made from recycled waste materials
26:14 No.20 Feather board using a cutting board
28:03 No.21 Self-made center finder
29:45 No.22 Improvement of center finder
30:30 No.23 Drill sharpener
34:16 No.24 Simple Styrofoam cutter
35:50 No.25 Homemade line laser
27:29 No.26 Work vise using clamp
How IT'S DONE
1. Use correct approved Time-Code formatting
2. Keep columns aligned
3. Do not cramp the text - leave two or three white spaces
4. Do not add non essential characters to the words
5. Study the Chicago Style manual and learn writing and text formatting
برافو عليك
Ideas very good
Здравствуйте у вас все отличные ролики.
Hi, cool from french👍👍👍👍👍👍
Brilliant!