SERIOUS QUESTION. I took apart my Edge controller just to get a good understanding of the components inside & put it back together. Now, the L2 is registering as pushed in & L1 isnt activating either as a result. I was very careful & nothing appears damaged. I did however notice that the ribbon cable for the trigger assemblies had a small line (almost like a purposeful indent/scratch) on one connector. This is on the end that connects the module to the main motherboard. I noticed that this was consistent on both trigger assemblies, so I have thus far assumed it is part of the design. Ive cleaned all the assemblies with 70% isopropyl & ensure all connections were secure yet the L2 still registers as stuck. ANY ADVICE OR INSIGHT PLEASE🙏🏽
I bought my dualsense edge off ebay and said it was in 100% working condition. everything works fine except the right trigger. It gets stuck down and whenI use it as default it sometimes stops as if i have it all the way at the bottom or middle. what do u think the problem would be?
Update I fixed it kind of. I disassembled the controller following your guide and it turns that the trigger adjustment lever wasn’t connected to the little thing that slides under the trigger to make it quicker. It would go down but not back up so it would always be between the middle or bottom option and sometimes would get stuck. A little piece had broken off so I glue it back on and kept it on the position all the way up since I don’t adjust my triggers. I mostly care about the paddles and those work perfectly fine. I used some rlly strong glue but im scared if I even try adjusting the trigger it would break again lol
@@EzeDaGreat03this is exactly what happened to mine. Haven’t take it apart but I’m having the same problem and I hear something shaking around in there..
I need a replacement ribbon cable for the r2 trigger and can't find any info online as to what type it is or where I can buy one! anyone know? all I can find are ribbon cables for the regular edge and the ribbon cable for the touch pad. mine must have gotten crimped and ripped when I was putting it back together :(
You left out the trigger bracket there is a conductive silicone insert inside it and it can also cause the r2 button to stop working!!! Please can someone help me find a replacement
A few weeks ago my adaptive trigger effect on r2 stopped working i try this hope it works😢(btw!!! i thinks its because of that r2 lock button on the back that cause this issue) EDIT: r2 trigger effect not working but r2 itself does idk why
How about a link o there to find the parts? I need part but can't find the parts in need
My dual sense motor doesnt work at all. No reaction in any game. My R1 R2 still works though. Not really sure where to go from here.
Where did you gte the new dualsense edge Adaptive triggers?
We’re can i find r1 r2 for edge controller
Thank-you! Needed this to fix my controller.
SERIOUS QUESTION. I took apart my Edge controller just to get a good understanding of the components inside & put it back together. Now, the L2 is registering as pushed in & L1 isnt activating either as a result. I was very careful & nothing appears damaged. I did however notice that the ribbon cable for the trigger assemblies had a small line (almost like a purposeful indent/scratch) on one connector. This is on the end that connects the module to the main motherboard. I noticed that this was consistent on both trigger assemblies, so I have thus far assumed it is part of the design. Ive cleaned all the assemblies with 70% isopropyl & ensure all connections were secure yet the L2 still registers as stuck. ANY ADVICE OR INSIGHT PLEASE🙏🏽
Why. Is. There. No. Link. To. Parts?!
I bought my dualsense edge off ebay and said it was in 100% working condition. everything works fine except the right trigger. It gets stuck down and whenI use it as default it sometimes stops as if i have it all the way at the bottom or middle. what do u think the problem would be?
Update I fixed it kind of. I disassembled the controller following your guide and it turns that the trigger adjustment lever wasn’t connected to the little thing that slides under the trigger to make it quicker. It would go down but not back up so it would always be between the middle or bottom option and sometimes would get stuck. A little piece had broken off so I glue it back on and kept it on the position all the way up since I don’t adjust my triggers. I mostly care about the paddles and those work perfectly fine. I used some rlly strong glue but im scared if I even try adjusting the trigger it would break again lol
@@EzeDaGreat03this is exactly what happened to mine. Haven’t take it apart but I’m having the same problem and I hear something shaking around in there..
My friend any links on where to find any parts for the edge?
Can you show how to replace the springs in the thumb stick modules? I’d like to replace those springs with a higher tension spring. Thank you!
I legit got 1:34 seconds into the video before I said “nah my controller isn’t that broken”
Is it possible to get spare parts for the EDGE trigger assembly? I have broken the slider mechanism on mine..
i’m having the same issue. we’re you able to fix it?
@@ab_077No I gave up on finding the parts. I jankily modded the mechanism to always have full trigger motion.. 🫣
No luck unfortunately. I ended up modding the inside slightly so that it stays in full range mode. @@ab_077
Any idea where to find the ribbon cables for the adaptive triggers?
Does anyone know where I can get the trigger shoulder mount replacement ?
I need a replacement ribbon cable for the r2 trigger and can't find any info online as to what type it is or where I can buy one! anyone know? all I can find are ribbon cables for the regular edge and the ribbon cable for the touch pad. mine must have gotten crimped and ripped when I was putting it back together :(
Did you find any info? i’m trying to find parts but for the edge parts are impossibleeeee
What if the trigger wont spring back up? It just stays pushed down
Are all the screws the same or are they different cuz im gonna repair my controller in a few days but dont know if the screws are all the same or not
I dropped mine and the r2 sticks abit in the middle everytime i press it? thoughts??
You left out the trigger bracket there is a conductive silicone insert inside it and it can also cause the r2 button to stop working!!! Please can someone help me find a replacement
A few weeks ago my adaptive trigger effect on r2 stopped working i try this hope it works😢(btw!!! i thinks its because of that r2 lock button on the back that cause this issue)
EDIT: r2 trigger effect not working but r2 itself does idk why
They still use plastic for the triggers gears and the endless screw, at this price...
почему на русском видео нет?
Потому что есть отдельный канал -> www.youtube.com/@howfixit-ua
@@howfixit извиняюсь, спасибо!
The back cover is a pain in the hole to get back on
can i get pinned?