Must Have E46 Mods: RTAB + Diff Bushings! Powerflex DIY Upgrade

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 ส.ค. 2024
  • Today, we're installing upgraded Differential and Rear Trailing Arm bushings from Powerflex bushings on my E46 wagon! These are pretty easy to remove with the right tools, and the new bushings are going to perform a lot better and never have to be replaced due to the polyurethane construction! I've always been a fan of Powerflex bushings so I'm super happy to be able to partner with them to bring you these awesome DIY videos.
    Thanks for watching, and check out The Bimmer Barn Store to help support our channel!
    thebimmerbarn.com
    Powerflex E46 Differential Front Bushing Kit PFR5-4625
    : www.powerflexusa.com/shop/pro...
    Powerflex E46 Differential Rear Bushing Kit (Non-M) PFR5-4626
    : www.powerflexusa.com/shop/pro...
    Powerflex E46 Rear Trailing Arm Bushings PFR5-3608BLK
    : www.powerflexusa.com/shop/pro...
    Note: This video description contains affiliate links. If you click on one of them and make a purchase, I may receive a commission. This occurs at no extra cost to you, but helps keep the channel going!
    Bushing Removal Sleeve Tool: amzn.to/3MiNlED (affiliate)
    2:17 Removing Rear Diff Bushing
    4:08 Removing Front Diff Bushings
    5:24 Unboxing Powerflex Diff Bushings
    6:58 Installing Powerflex Diff Bushings
    9:37 Removing RTAB Bushings
    11:41 Unboxing Powerflex RTAB Bushings
    12:35 Installing Powerflex RTAB Bushings
  • ยานยนต์และพาหนะ

ความคิดเห็น • 26

  • @lp2565
    @lp2565 3 ปีที่แล้ว +1

    Great video series on the rear sub assembly! Thanks for sharing. Looking forward to the front work.

  • @Engineerboy100
    @Engineerboy100 9 หลายเดือนก่อน +2

    To use your cup instead of washers turn the cup around and use it backwards.

  • @SeanScarbrough
    @SeanScarbrough ปีที่แล้ว +1

    Hey good vid man! Thanks for showing the details on how to remove those bushings. This is something I need to do but have been putting off for quite some time.

  • @Nico_335i_DCT
    @Nico_335i_DCT 3 ปีที่แล้ว +1

    Very nice upgrade, Chris! Regards Nico.

    • @TheBimmerBarn
      @TheBimmerBarn  3 ปีที่แล้ว

      Thanks Nico! Can't wait to drive it now

  • @karolalbin
    @karolalbin 8 หลายเดือนก่อน

    Thanks for video

  • @PlymitBoy
    @PlymitBoy 2 ปีที่แล้ว +3

    Hey Bimmerbarn, how do the RTABs feel on this car? I have black powerflex RTAB bushings, I've been meaning to install them for 3 years now lol. Finally getting around to it and I'm doing some research on the RTABs. How did yours turn out?

  • @bmw0208
    @bmw0208 3 หลายเดือนก่อน

    Hey what lifts are you using at all? wanted to get a set and need to do this job on mine as well !

  • @Nina_39-c5l
    @Nina_39-c5l ปีที่แล้ว

    do you recomend it for a dairy car for normal use?

  • @carlwood5501
    @carlwood5501 2 ปีที่แล้ว

    1.16 turn the cup around so the nut is inside it then it will fit

  • @bartoszkotowski8281
    @bartoszkotowski8281 3 ปีที่แล้ว

    I think you need to do something with this rusty nuts and bolts in this lovely matt black subframe. I recommend metal blacking solution

    • @TheBimmerBarn
      @TheBimmerBarn  3 ปีที่แล้ว +1

      Yeah they stick out now that everything else looks clean! I need to buy a bolt tumbler so I can have all my bolts look fresh 🔩

    • @bartoszkotowski8281
      @bartoszkotowski8281 3 ปีที่แล้ว

      @@TheBimmerBarn all you need a to even sand blast them or clean up with wire wheel best one is a bench mounted and just buy that blacking solution. All you need to do than just dip them in and they turn black and that is a very good anticorosion protection. In UK 🇬🇧 the solution is about £25 for a 1liter bottle. Just watch it on TH-cam 🤣 really easy to do. And the results are brilliant

    • @TheBimmerBarn
      @TheBimmerBarn  3 ปีที่แล้ว

      @@bartoszkotowski8281 trust my I love watching TH-cam videos, I'll look into it! I want to get a bench wire wheel, definitely would let me clean stuff up faster. Thanks!

  • @fastlanenigeria
    @fastlanenigeria 2 ปีที่แล้ว

    Does it squeak?

  • @pugs1377
    @pugs1377 3 ปีที่แล้ว

    Dude! Your Killin me with the two wrenches. Take a deep well, cut it in the middle. Buy a piece of iron pipe about 24" long that is the same od as the socket of has an I'd that is the same as od of the socket. Weld em together. Bam! Sooper deep well for studds like that

  • @gvdan1407
    @gvdan1407 2 ปีที่แล้ว +1

    This is all the bushings system for the e46?

    • @TheBimmerBarn
      @TheBimmerBarn  2 ปีที่แล้ว +2

      There's plenty more options and bushings you can upgrade with Powerflex, but these two are definitely what I would recommend for your E46! Great upgrade. Thanks for watching!

  • @rayray3009
    @rayray3009 3 ปีที่แล้ว +2

    Does the ride suffer with the poly bushings? this is going to be a great driver

    • @TheBimmerBarn
      @TheBimmerBarn  3 ปีที่แล้ว

      Not in my experience! You get tighter suspension, maybe slightly more road noise depending on your tire and shock setup.

  • @bartoszkotowski8281
    @bartoszkotowski8281 3 ปีที่แล้ว

    Why can't I paste a screenshot from your video 🤔

  • @miormanx5907
    @miormanx5907 ปีที่แล้ว

    How to oder this item bos

    • @TheBimmerBarn
      @TheBimmerBarn  ปีที่แล้ว

      Links in description! Thanks for watching 🙏

  • @bartoszkotowski8281
    @bartoszkotowski8281 3 ปีที่แล้ว

    Them

  • @ScienceFollowsTheEvidence
    @ScienceFollowsTheEvidence 4 หลายเดือนก่อน

    Sorry, the pink Crocs did it for me. I'm out.

  • @EvilJ069
    @EvilJ069 ปีที่แล้ว

    I can't respect a man in crocs... Especially PINK crocs