Honda Idle Air Control Valve Cleaning
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- www.ktecgarage...
Discord: / discord
Idle problems got you down? They got me down! The 2000 Accord has had an intermittent P1259 for VTEC failure and now a P0505 for the idle air control valve. Seems that one can cause the other so my investigation intensifies. Plus a SNAFU at the parts store turns this from a replacement to a cleaning video. Not my choice, but I roll with the punches.
This repair will apply to most Hondas of this vintage.
There are many ways to "skin the cat" and these are the methods that I use. Any criticisms or alternate methods posted in the comments are welcome, just keep it civil.
Disclaimer:
I am not a mechanic and do not warranty or guarantee any of the information contained in this video. Please follow all safety instructions included with the tools that you use and always wear eye and other necessary safety protection.
318,000 + miles? That car's the bomb!
Keep watching! Drove that car from NC to TX and back a few videos later.
It's gonna be any minute!😂
I need one for my 2004’tsx but i cant find it ornthe part number
Hello my friend, i need the part you got the first time, without the vacuum line, can you please tell me where did you order it? and maybe provide a link? will help me greatly!
It was from Autozone. Try autozone.com I don't have the number for it. Sorry.
The other part that you got in your hand is the one that I was speaking about for $150 or less I'm at AutoZone and that is a Duralast so that's what you got and then the other one that's $800 that's the one that you had on your right hand and that's the one that you need they are $800 in special order..
They're $22 on eBay.
@@lukeleonard3965 you pay for what you get. Replaced it for free. Special order due to shortage of parts like this. We use o.e.m.
Awesome info. Thanks a million
Thank you!
Am I wrong, when spraying brake cleaner in there shouldn't you keep it oriented so that the electronic part[black] is kept up to minimize corosive cleaner out as much as possible?
Wouldn't hurt. It's probably bad practice but I spray carb and brake clean everywhere!
Are the water/coolant hoses that heat up the case of the IACV necessary to be plugged in? Is it beneficial to have it heated?
Some people delete the hoses, but to work as intended, it needs to heat up to operating temperature. I wouldn't do the delete.
Did it work?
Nice man..
Thanks!
I.a.c is not cheap.. for the none ulvec it 150.00 is tou have a ulvtec and slevtec are over 800.00 usd and special order..
Looked for a vacuum leak and still new hoses new I.a.c. and still have a problem.
Check all around your throttle body for a leak. I've found two leaking throttle bodies with the same symptom since this video and replacing them with a junkyard part fixed it. If you can get your hands on a smoke machine, that is the easiest way. Even if you have to pay a shop their diagnostic fee to smoke it, I would. I finally broke down and purchased one and it has already payed for itself. Wished I had it back when I made these videos! Good luck!
Ebay
@@machiavelli4428 ebay has counterfeit parts, that's why they're so cheap
@@cryeredd7563 no.all buyers are protected from counterfeits.ive been buying parts last 12 years from eBay. I've never had an issue with parts including after market.
@@machiavelli4428 perhaps, but how many people buy the knockoff crap and never realize? No way oem injectors or ignition coils can be as cheap as on ebay and not be fake. That's one for instance of many
Awesome! Thank you!
Glad it was helpful.
Nice video.
Is ultrasonic cleaning an option if electronics removed ?
Some say yay others nay
I don't immediately see why you couldn't, but I could be missing something. I had success with carb cleaner.
@@ktecgarage thanks for the feedback
What camera/mic do you use?
Hero 8 with the mic media mod.
@@ktecgarage sounds and looks awesome!
Thanks! It took me a while to get it decent. Lots if trial and error.
I really enjoyed your F23 rebuild. Really helped me a lot doing a lot of work to my F22b1!
do u have to adjust the idle after installing the IAC