ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Today we show how to replace a Pool Pump Motor -
🛠️🧰👨🔧🔩⚡ TOOLS, PARTS & MATERIAL USED IN THIS PROJECT: 👨🏭⚙️🔧🧰🔨🔦⚡
Century B2853V1 1.0 Horsepower 3450 RPM Stainless Steel Single Phase Pool Pump Motor with P56Y Square Flange for Inground or Above Ground Pools: amzn.to/3cuRto3
amzn.to/3Yz23OB
45 Degree Elbow Replacement: amzn.to/45R3smX
Flexible Electrical Conduit Liquid Tight PVC Conduit Kit - 5 Coupling, 3 Elbow and 10 PCS Strap: amzn.to/3YWa8Nh
OTHER THINGS YOU MAY NEED:
Pool Pump Covers for Outside Units: amzn.to/3RZDUyX
VINGLI BLUE Pool Vacuum Cleaner Automatic Sweeper Swimming Pool Creepy Crawler Vacuum: amzn.to/3dSXfem
Vacuum with Ten Hoses and Two Yellow Diaphragms, Blue: amzn.to/2VqgsR5
VINGLI GREY Automatic Pool Vacuum Cleaner Swimming Pool Vacuum with Additional Hoses & Diaphragms, Grey: amzn.to/3jvmqI9
VINGLI BLUE Swimming Pool Vacuum Cleaner Automatic Sweeper, Automatic Suction
Diaphram VINGLI Automatic in-Ground Pool Cleaner 2 Packs: amzn.to/2D40nXS (If not available see below)
Compatible Diaphram for VINGLI - ATIE Long Life Diaphragm W69698 Replacement with Retaining Ring W81600 Fits for Zodiac Baracuda G3, G4 Pool Cleaner Diaphragm W69698 (2 Pack): amzn.to/2YlfxCB
Manual Vacuum Head: amzn.to/3B20dJP
ProTuff 17" Pool Silt Net: amzn.to/2AGNPEg
Pentair C108-33P 5-Inch Trap Strainer Basket Replacement Sta-Rite Pool: amzn.to/3pn3kWg
Pentair 350013 Lid O-Ring, Challenger (All), WFE (After 11/98): amzn.to/3pb3pMS
Pool Gasket Lubricant - 4oz Lube Tube: amzn.to/3r5gWaF
Pentair C3-185P Trap Cover Replacement Sta-Rite Inground Pool Pump: amzn.to/3sRQbqm
Weights for Pool Cleaner Hose: amzn.to/3zbFenS
“As an Amazon Associate I earn from qualifying purchases at no extra cost to you.”
🛠️🧰🔧🔨🔩👨🏭⚙️👨🔧🔦⚡⚡
How to Replace a Century Centurion Pool Pump Motor - Step by Step Video.
This Pump
Brand: Century
Material: Stainless Steel
Item Weight: 25.2 Pounds
⚡Warning⚡
If there is any doubt about whether the power supply to the pump has been disconnected successfully, contact a licensed electrician for help before disconnecting the pump and to reconnect the new one.
🛠️🧰🔧🔨⚡🔩⚡👨🏭⚙️👨🔧🧑🔧
POOL MAINTENANCE & ACCESSORY REVIEWS REPAIRS Playlist for more;:
• Vingli Pool Vacuum Cle...
See HOME IMPROVEMENT Projects Playlist for more;
• DELL OPTIPLEX 745 Mini...
We install a Century B2853V1 1.0 Horsepower 3450 RPM Stainless Steel Single Phase Pool Pump Motor with P56Y Square Flange for Inground or Above Ground Pools: amzn.to/3cuRto3
grazie di cuore AMICO MIO CARISSIMO MOLTO CARO DALLA ICILIA UN SALUTO CARO GIUSEPPE
I just wish the rest of TH-cam could make tutorials this easy to follow! Many thanks for this video!
Thanks for the feedback. Glad it was helpful!
You need to make a whole series of how to videos. You would be #1 on TH-cam. Thank you so so so much!
Wow, thank you for the feedback. Much appreciated.
I received my Century pump 2 days ago and installed it yesterday after watching your video. Thanks so much for this excellent video that explained everything in detail, it really helped me out.
Great to hear! Glad it helped. I appreciate and thank you for the feedback.
Followed ever step and it worked perfectly.
Glad it helped. Thank you for the feedback.
I am so glad I found this video. I have a new motor coming in two days and would have totally screwed up the installation without it.
Glad it helped... Thank you for the feedback.
Best video ever! Thanks. Used it yesterday and saved myself 1300! The local pool store wanted 1600 to replace it. I asked if they were intentionally trying to go out of business? Will get the old motor fixed and have my spare. Thanks again for the great vid.
Very smart to have the old one rebuilt. Glad it helped! Thanks for the feedback.
I really appreciate you taking the time and effort to make this extremely detailed and easy-to-follow video.
You're very welcome! Glad it was helpful!
Thanks for that. The century motor for the waterfall on my pool is very old, still works, but is so loud it is just too annoying to use. Your video explains very well how to replace it. Without your video I am sure I would have screwed something up or taken a lot longer than I should have!
I'm glad it helped you. Thank you for the feedback, its much appreciated.
Dude- you are amazing! Simple for you, would've been impossible for me to figure out without this video. I sincerely appreciate how methodical, precise, and helpful your explanations are. Thank you!!
Glad it helped!
Forgetabout-It! This was the best vid I've seen thus far on installation on a replacement pump! Thank you!
Glad it helped! Thanks for the nice comment, I appreciate the feedback.👌
Man after watching and listening to your video makes me think this will be really simple. Thank you for your excellent commentary.
Glad it was helpful!
Getting ready to change our Century Centurion B2855 motor in the next few days. Using this video!!!!!! Thank you, John....one of the best instructional videos I've ever seen on TH-cam.
Glad it helped! Thank you very much for your positive feedback, I appreciate it.
@@JohnCRV Is there a way to determine which of the two non-ground wires go where? In my efforts to troubleshoot existing motor (which included disconnecting ground and 2 other wires and attaching new circular spade connectors) I forgot to take a beforehand pic. The real problem is I have 1 green (obviously wire)...but 2 same colored wires as well. Is there a way to use my multimeter to test which one goes were? Thank you!
@@Son_of_Aragorn Sorry to hear. Since we are not certified electricians we hesitate giving such advice. That been said; There's a phone number that comes with the motor, they can probably answer your question.
This is the best video ever made on TH-cam. You guys saved me so much money.. thank you!!
Glad it helped! Thank you very much for the feedback.
I might have done this a time or two . LOL , But in the last few years the cost to only replace motors , and the labor involved , made replacing the whole pump the preferred option for many
Great job and instructional tutorial John and friend .
I forgot, you are a poolman. Thanks for the nice comment Phil. Hope all is well. 👌
Great step by step tutorial on the procedure to replace the pool pump motor John & son! Have a super week ahead! 👍
Thanks 👍
Great video on how to replace motor. I think the only thing I would do different is not re-use the pump seal. The OEM says to change it with the motor and they usually wear out. The outer (larger) o-ring is also something to be looked at and replaced if needed. Electrical wires needed to be in conduit or not exposed if code inspection occurs. Perfect video on the how to portion!
Thanks for sharing
Thank you so much. I haven’t done it yet but know I can with ur video as I know the pump is on its last leg! Perfectly clear enough for a 68 widow granny!
Glad it helped. Good luck and thank you for the feedback.
Thank you very, very, very much for this video!
You're very welcome! Glad it was helpful! 👍
You are a life saver.
Glad it helped!
Just want to tell you thank you for the instructional video that you put this help me to entirely take my motor down and replace it with a new one. Thank you so much. Blessings to you and your family.
Glad it helped! Thank you very much for the feedback.
Thanks for posting these instructions. This is going to be my project tomorrow, replacing my Pentair 1 HP motor.
I hope it helps. Good luck!
I am faced with this project. Pump on order. Very comprehensive video. Thank you.
You are welcome! Glad it was helpful.
Thank you! Awesome video I just installed mine this afternoon! You definitely saved me a fortune! 😂
Glad it helped and thanks for the nice comment.
thanks, your video made replacement of my pool pump motor much easier for me. Much appreciated!
You're welcome! Glad it helped
Thank you so much! Replaced our motor today with your video. You do a great job.
Glad it helped! Appreciate the feedback.
OUTSTANDING PRESENTATION ! Many thanks. You have helped many people.
Thank you! Glad it was helpful.
Not that I will likely ever need to replace a pool pump motor but it was interesting to see how its done. Thank you my friend.
Thanks Dave
I just installed mine this afternoon. Saved big $$$. Thank you!!!
Glad it helped! Enjoy it.
Perfect step by step how to John, extremely well explained.
Glad you enjoyed it Dennis. Thank you
Awesome instruction video. Well detailed and easy to follow. Thank you!
Glad it was helpful!
This video was a lifesaver! Thank you so much
Glad it helped!
Great video, I now know I can use this same method on my $800 jet pump to just replace the motor and save hundreds. I especially like the dog doing his business in the background at 4:34. 😁
Glad it helped! I never noticed what the dog was doing until you pointed it out 😂
Спасибо большое за интересное и полезное видео! Хороших выходных!
Thank you
Great step by step description!
Glad it was helpful! Thank you for the positive feedback.
Great video, including safety precautions.
Glad it helped. I appreciate the feedback!
Perfect video Thank you...
Glad it helped!
by far, the best video on you tube,, thank you so much. you gave the courage to change mine, will try tomorrow and keep you posted. Thank you sir
Glad it helped.
Excellent tutorial. Used your directions, Worked perfectly. thanks
Great to hear!
This was very helpful and saved me a ton of money. Thank you!
Glad it helped!
Very beautiful tutorial! It was a pleasure to watch your video. Nice presentation, John! I wish you a nice new week!👍
Many thanks, You too Sorin.
Best Video - Great video quality and expert step by step explanations. Thank You
Glad it was helpful!
Fantastic! Thank you so much!
Your voice is awesome too! It sounds like George Carlin!!
Wow, thank you! Glad it helped.
Very nice presentations usualy for many people
Thanks a lot
Excellent tutorial, If you follow step-by-step you will save a lot of money
Thanks. glad it helped.
Great video, filming and narration. Thanks
Many thanks! Glad it helped.
Fantastic video
Glad it helped, thanks for the feedback!
You saved the day. Thank you very much for your time and video
You're welcome! Glad it helped
Thanks!
Welcome!
Fantastic project, nice work, smart man, smart hands.
Great work, you always work hard.
Thanks my friend, all best to you.
Many thanks Lisa. I hope you have a great day!
I needed this. Thanks guys. I would replace all o-rings though
Glad it helped
It was interesting to see how to replace a pool pump motor. Thank you.
Thank you and good to hear from you.
Brilliant.
Thanks for the feedback! Glad it helped.
Great video
Glad it helped and appreciate the feedback.
Fantastic video! Thank you!
Glad it helped! Thanks for the feedback.
Thank you, John. I installed this a few years ago, but needed a refresher course. Yours is the best! Also, do you know if this Century brand should have the bearings oiled every so often? If so, where is the oil hole?
Not that I know of sorry. My Son was looking at the paperwork it came with and there was no mention of any type of lubing. You may want to call them to make sure. Most motors are sealed these days.
Thanks for showing. Good upload John.
Thanks for watching!
great video, thank you
Glad it helped
Nice job! Thank you!
Our pleasure! Glad it helped.
Thanks, John, for this easy-to-understand video.
My pump just died last week and I need help identifying and ordering the correct replacement pump. The motor is connected to a Jandy Stealth pump. I took photos of the pump motor with serial #s, etc but I am having difficulty matching up the correct replacement motor.
My old pump was a1.25hp century centurion, A.O. Smith.
CAT # 189083M,
PART: 7-193992-06,
TYPE: CX
FR: R56Y
HZ: 60
RPM: 3450
VOLTS: 208-230/115
AMPS: SF 6.0-5.6/11.2
TIME: CONT
ENCI: DP
FORM: KJM
CODE: L
ISUL CLASS: B
AMB: 50* C
If you could help me, identify and find the proper replacement to order that would be very helpful!
Your best bet is to call them. Here's their website for contact information www.jandy.com/en/products/pool-pumps/stealth
Good lucl.
Great video. THANK YOU!
Glad it was helpful!
One Question... Great video, but when I went to change out my pump, the spring loaded black seal that you mention which has to be dislodged by using the pump cover has two ends that are different. I could not tell which end went on the shaft closer to the pump versus which went further out toward the pump fan. The spring has a flat round end with metal and an inner flat rubber seal. The other end has a round rubber piece that has raised inner edges on both sides and fits into a round groove on the other end of the spring. Which end goes where? (It popped out before I could see which end was which...) Much appreciated.
We put it back the same way we took it off and hard to remember the difference but we do remember the green dot on the rubber seal facing out. We should have paid more attention to that. Sorry.
Terrific tutorial, thanks.
Glad it was helpful!
Gracias!!!
You're Welcome!
Thanks for including the wiring. Most guides don't.
Glad it helped👍
@@JohnCRV Unfortunately it’s running but no suction :(
@@ameremortal If the wires are reversed the motor will turn the opposite way. If you're not familiar with electricity be safe and get an technician.
@@JohnCRV thanks. That wasn’t it. I triple checked and even flipped them before buying a new pump.
What a great tutorial
Thank you! Cheers!
Great vid!! Gonna replace a century 2.5 motor and wanted to know how much water you added to prime the system??
Fill up the strain compartment should be enough...
Perfect. Thank you!
Glad it helped!
Thank you for sharing have a great day friend
Thank you too
Great video!
Glad it helped
Good video.
Mine has the large clamp holding the motor and impeller housing on.
What’s the best way to keep the large O ring in place? It falls off when trying to slide it into its place.
Try some synthetic grease to hold it. Its also good for it.. Good luck..
Awesome video!👍👏🏼
Thank you! Glad it helped.
Great job - Thanks
Glad it helped.
Hi John, excellent work, my friend! Great tutorial as always.👍👍
Have a nice week....Elio 👋
Thanks, you too! ✌
Thanks to Tony The Buffet Bimbatso, I’ll be doing this do it yourselfer
I’ll also have someone else start my car in the morning
Too funny LOL. Good luck
@@JohnCRV
😀
Wow So Nice Century Centurion - Step by Step Video 🛠 and Really Really Beautiful! Keep it up Good Job! Thank You So much! Stay Connected! 😍😍😍😍🤗🤗🤗🤗
Thank you, I will
Great job with the video, the audio and the expert instruction. Thank you so much.
Thank you. Glad it was helpful!
I followed your instructions on replacing my pool pump motor and it was very helpful by the way. Thanks for that. I now have a leak in the bottom of the new pump when I am trying to prime it. Can you help? Thanks
Glad it helped!
Did you carefully inspect the seals when you took it apart? they could have been old and just came apart....
If you have a leak between the pump and the motor, the seals are probably damaged. They do sell a seal kit you can get so you wont have to guess which seal is leaking... Be very careful when replacing them and when re-attaching the pump together... Hope that helps.
The new pump came with new seals. I will take it back out and re inspect. Thanks
Wow Really Nice Replace a Pool Pump Motor, thank you for sharing 😍😍😍😍🤗🤗🤗🤗
thank you
great video except the housing on the back the shaft you hold to tighten the impella piece is covered by a bunch of wires and what looks to be some type of round black capacitor i cant get to the shaft to hold it to tighten the impella?
Not sure what you mean. is your motor the same as the one on the video?
definitely awesome production :)
well done...see you soon :)
Thanks for the visit👍
Thank you for making a great video. Question: What did you use to lubricate the gaskets? Vaseline?
Yes I did.
Nice and interesting presentation my friend! 👍Greetings
Thanks for the visit. Best Regards..
Looks easy enough. My problem is the three wires going into my existing motor (that I need to replace) are confusing to me. There is a green wire (obvious ground)...but two purple wires. How can I tell which one to properly connect to new motor? Or does it not matter (if they are both "load wires" and can interchangeably be connected to L1 and L2 connectors on motor)??? Thank you!
Noticed you had 2 comments, this reply is the same. in case you miss the first one...
Sorry to hear. Since we are not certified electricians we hesitate giving such advice. That been said; There's a phone number that comes with the motor, they can probably answer your question.
mio AMICO CARO CARISSIMO DEL MIO CUORE grazie di tuo video SEI UNA PERSONA IN GAMBA CHE ORMAI E DIFFICILE TROVARE NEANCHE IO SONO ALLA ALTEZZA DI TE E FACCIO TANTE COSE MA SONO POCHE RISPETTO A TE COMPLIMENTI HAI RIMESSO LA POMPA DELLA ACQUA TI INTENTI ANCHE DI ELETTRICITA COMPLIMENTI MIO AMICO CARO HOHN COMPLIMENTI DI CUORE TUO AMICO GIUSEPPE DALLA SICILIAMIA
Grazie per la visione ed il tuo gentile commento. Buona settimana.
super info!
Super! Thanks
Very useful
Glad to hear that
Amazing Informative This Your How to Replace a Pool Pump Motor That's Great! Keep it up Good Job!!! Stay Connected!😍😍😍😍😍
Thank you
Wow John that was interesting and lots of work too 👍63 Gary
Many thanks
A question about the 230 wiring? You removed the two slip-on pig tails from what I see. Always better to direct connect your wire to terminal screws. From your picture, what colors went where? I am swapping out this exact motor for a bad Pentair. Thanks!
Pause the video between 6:05 and 6:06 you can clearly see them screwed back in. Make sure your Quality setting is set at 1080p60 and enlarge if necessary hopefully you have the same color wires, so be careful. If not sure call an electrician.
Awesome! Like 739.
Many thanks!!
My Pentair pump high speed went out and only the low side works is that a sign the motor is bad before I change it
Sorry, I'm not familiar with High Low speed.
Installed the new pump but it’s spinning in the opposite direction. Any thoughts?
first thing to check if you reversed the wires....
What is the little box on top of the motor for
I think you mean the capacitor?
My Century 1HP motor died and I want to replace it with a Century 1.5 HP motor. Do I need additional part or is it a clean swap?
Not sure. You'll need to contact Century to make sure.
I see that in the video you didn’t change the gaskets, if we don’t damage them during the process does that mean that changing them is not necessary?
I leave that up to you my friend....
This motor and pump sits in the shade 75% of the day and we were real careful taking it apart..... So, you get the idea. I mean, they don't cost much so if you want to its no big job... Good luck
@@JohnCRV Thank you, yes i went ahead and ordered the O-ring kit. They didn't cost much and for the peace of mind, I might as well. I also went ahead and ordered the impeller and diffuser. The Amazon price was a fraction of what pool equipment suppliers wanted, not to mention the labor costs i'm saving. Again, thank you for your video and clear instructions which gave me the courage to tackle this myself.
@@marvinaviles2593 Glad it all worked out and thanks for the feedback.
Is this motor comparable to the Century Centurion B129?
You need to call them to make sure.
Very good tutorial, easy to follow.
Thanks Bon. Glad it was helpful!
Don't forget to ground the outside of the pump
I put the pool pump together, when I turned the system on, the pool pump connected with the sight class is leaking
Sounds like the O-rings may have gotten damaged. Just need to be replaced...