Upgraded K&N Air Cleaner for a Harley Davidson Dyna Street Bob!

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 พ.ย. 2024

ความคิดเห็น • 27

  • @BradleyNeary
    @BradleyNeary 3 ปีที่แล้ว +3

    Good idea using those brushes. I wouldn’t have thought of that

  • @benumberhandt4619
    @benumberhandt4619 3 ปีที่แล้ว

    Thank you Jason for given me a comment you keep up the good work on those videos

  • @chazoray1
    @chazoray1 ปีที่แล้ว +2

    Hey good video really appreciate the breakdown. I had one question how do these filters run during the rain. I ride my bike to work a lot and curious about it being out in the rain with this filter. Rookie over here so I apologize if I should know this answer.

    • @jasonslifeadventures
      @jasonslifeadventures  10 หลายเดือนก่อน

      No worries, they make rain covers for them too.

  • @rustyreuting7431
    @rustyreuting7431 7 หลายเดือนก่อน +1

    Question here, is your fuel injected or does it have a carburetor? Im trying to install a new air filter on my 2011 but cant find an install video and have no idea if itll work or not

    • @jasonslifeadventures
      @jasonslifeadventures  7 หลายเดือนก่อน

      Yes, mine is fuel injected. Good luck in your searches.

  • @jonhopkins1284
    @jonhopkins1284 ปีที่แล้ว +2

    I bought one for my twin cam looks very nice but it is awful loud

    • @jasonslifeadventures
      @jasonslifeadventures  ปีที่แล้ว

      Looks really nice too !

    • @romesotherchannel8902
      @romesotherchannel8902 10 หลายเดือนก่อน

      You got that right! I love the look but HATE all the engine noises that comes through the filter.

  • @romesotherchannel8902
    @romesotherchannel8902 10 หลายเดือนก่อน +1

    Do you hear a lot of engine noise through the filter?

    • @jasonslifeadventures
      @jasonslifeadventures  10 หลายเดือนก่อน +1

      Not really, but I did notice a little better performance.

  • @IAmJoeJericho
    @IAmJoeJericho 3 ปีที่แล้ว

    Have you seen a difference in any kind of performance from the stock you had? I have a 2014 dyna street bob with that same stock air filter. I'm looking to upgrade. Just wanna have a smooth ride on the freeway.

    • @jasonslifeadventures
      @jasonslifeadventures  3 ปีที่แล้ว +1

      Yes, it did. I didn't put it on a dyno or anything, but it seemed to be more responsive.

    • @donovan123123
      @donovan123123 3 ปีที่แล้ว

      I just installed mine today, FLHXS 103, and I didn't really notice a power difference. I do have a powervision tuner loaded it with a dynojet preset tune (intake exhaust upgrades), did one 20 min run with the autotuner , might get a bit better, but with a heavy tourer, not much difference. But the look is amazing IMO, and I always like K&N filters so I like it. I don't actually like the sound now though, at low speeds you can hear the sucking into the intake.

  • @polylove77
    @polylove77 3 ปีที่แล้ว +1

    Did it come in purple?

    • @jasonslifeadventures
      @jasonslifeadventures  3 ปีที่แล้ว

      I don’t think so.

    • @polylove77
      @polylove77 3 ปีที่แล้ว

      So you sprayed the purple oil?

    • @jasonslifeadventures
      @jasonslifeadventures  3 ปีที่แล้ว

      I use normal oil.

    • @polylove77
      @polylove77 3 ปีที่แล้ว

      Sorry. I definitely wasn't descriptive in my question.
      What I noticed was the air filter itself looks purple. I was just wondering if the air filter came with that color purple? Where as usually kn air filters have a pink to red color due to the air filter oil that is sprayed on it. I love that purple filter look.

    • @polylove77
      @polylove77 3 ปีที่แล้ว

      Sorry. I definitely wasn't descriptive in my question.
      What I noticed was the air filter itself looks purple. I was just wondering I'd the air filter came with that color purple? Where as usually kn air filters have a pink to red color due to the air filter oil that is sprayed on it.

  • @GuiltySiNz
    @GuiltySiNz 3 ปีที่แล้ว

    why didnt u continue to use the Breather Bolts to relieve Air Pressure from the engine into the Throttle Body, u used regular screws with no Relief.. Just Curious, Didnt u know u suppose to use the same bolts?

    • @jasonslifeadventures
      @jasonslifeadventures  2 ปีที่แล้ว

      Hello, great question. I used the new bolts that came from the K&N filter and they have the proper holes in them to fit the new filter properly.

    • @philhewitt5106
      @philhewitt5106 9 หลายเดือนก่อน

      Where do the breather bolts vent to? I'm trying to avoid the blow by entering the throttle body/ combustion chamber

  • @desisto54
    @desisto54 3 ปีที่แล้ว

    You’re supposed to put those threaded rods on the back plate before you put it on the bike.

    • @jasonslifeadventures
      @jasonslifeadventures  3 ปีที่แล้ว +1

      Yes, I assume so, after that fact, but I didn't see lots of, how to do videos out there. Good point :) thanks !