Homemade Vs Premade Airsoft Suppressor Test Part 2!
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- The is a follow up video to the comparison video I made 3 months ago! I test different foams to find out which one makes my HPA airsoft gun quieter.
Foam that was the quietest:
www.amazon.com...
Rage Custom Suppressor kit:
ragecustomairs...
Thanks for watching! LIKE the video if you enjoyed it!
Watch more videos!!
Novritsch vs Homemade Suppressor Test! Does Size Matter?: • Novritsch vs Homemade ...
SSG10 Review: • Is the Novritsch SSG10...
SSG24 Review: • Novritsch SSG24 Review...
First time with HPA: • Why haven't I converte...
Also......
Check out my gaming channel!!
/ @mrconnor947
#Airsoft #Suppressor
This is what I've been waiting for. thank you so much!
I'm glad to hear that!
Great videos. Thank you for the field test. I know how much time and effort these take. You should do one more on cutting the foam disks! Or maybe experiment with disk sizes and spacing. Thanks again!
Without realizing it i actually got a very similar foam from Walmart for $8. Haven't tested yet but should be quiet
great video, finally a video with lots of testiings and hard facts / measurements.
Did you test the effect of a wider supressor, like 40mm diameter vs a 30mm?
Have you tested scotch brite instead of acustic foam? Many ppl recommend this material.
Best test I've seen thank you for posting it.
Glad you liked it!
brother, u really need to make this test indoors
Great test. So does it mean that a high density foam is better to suppress? Maybe you can also test scotch brite mods 🙂
I'm curious if you repeated this test on a calmer day, and moved the mic away about 10-15 feet and avoiding as much of the piston/engine noise clacking.
yeah, I tested it at night too same results
Hey do you have a video on how to make your o.g foam ?
I talk about how I made them in the first video th-cam.com/video/oQ2FMsLyuUc/w-d-xo.html
I show how I did it starting at :15 mark
At the time of my comment rage custom website is unavailable for some reason just letting everyone know that it’s not just a problem they might be having
Thanks
@Airsoftconnor can you please tell me more about your setup to measure the sound ? Application, microphone, etc. ? Thanks!
You should try the novritsch modular suppressor, it has a better foam design. It make my Lancer tatical Gen 3 silent. Without it it's the loudest gun out of everyone I play with
This is kinda off topic, but how did you "move the threads" deeper inside the short supressor?
Can this be done with other supressors?
So the suppressor I used has an end cap on each side that can unscrew, which has the holes for 14mm and -14mm. I took the end cap for the -14mm that fits on my m4 and grinded off the threads that screws into the main tube. That way it can fit deeper inside the tube. Then I just used Jb weld on the end cap and stuck it inside the tube to where it covers my outer barrel. You should be able to it to others if their not solid pieces
I hoped that helped!
@@airsoftconnor yes that helped a lot and went into detail, I understand how to do it now, thank you very much, both for the reply and the very detailed video about the sound of the supressors.😁👍
Have you tried expanding foam
Very nice job. Ordered the foam that was the quietest but dunno how to cut it. How did you do it? Also saw you first video but this technic def doesn work on the quietest foam. Would be nice if you have any advice.
Did the same thing where i mashed the suppressor on the foam. Took a while to do! You could also use a a soldering gun
Yeah, but WHERE are you getting the threaded metal tubes with removable end caps!? Almost NONE of US Airsoft stores are carrying mock Suppressors that have removable end caps! They are all welded or glued on and nothing works to remove them. I've found sellers in China, BUT the shipping costs is higher than the metal tubes! BTW my designed "shorty" silencer (110cm x 3.5cm) only gets 52db and that is on a Crosman Bushmaster M4 CO2 500fps BB Rifle with a 7" barrel. I use alternating thickness (ID) foam, but not from sheets like you use. I "hot wire" cut my foam. I can cut all the inserts for a 255mm silencer in less than a minute.
Evike their matrix brand has both endcaps that can be removed
@@airsoftconnor I stopped ordering anything from Evike, they're a bunch of liars and crooked. They claim they shipped orders and a week or MORE later UPS or the USPS finally actually receives the package for shipping! Evike has literally lied that it was shipped, UPS just isn't scanning it, and I called UPS and was told that was a lie, they ALWAYS scan on receipt of any shipment. I'm ordering some open-cell high density foam in tubes the correct OD for tubes and pre hollow centers of two different ID's. Then I cut the tubes with a "hot wire" I built.
How did you move the threats? And can it be done to any supressor?
what app did you use to measure it?
DecibelX i also tested with my decibel meter off camera
helo
Ik that I'm a little late but what engine are u running in this gun for the test just curious
Inferno gen 2!
What suppressor did you use to cut the foam ?
Its a matrix suppressor from evike
hey, what gun did you use?
vfc avolon with wolverine gen 2
@@airsoftconnor thank you :)
Link aint available :/
Thank you for letting me know. I've updated it! ragecustomairsoft.com/collections/cloak-series-suppressor-insert-kits
@@airsoftconnor you're welcome! Also, foam from Amazon aint working too ;)
@@tiagomoreira8742 Hmm I checked it and it works for me! I would just get the Rage custom kit if your doing 1 suppressor!
@@airsoftconnor Sorry meant that aint available 😁 and thanks! Wanted to do internal supressor maybe they sell just the foams
@@tiagomoreira8742 yeah they sell just the foam! With custom sizes
Could you test it on a gbbr?