Im confused.... how did you know how much to push the subwoofer baffle plate to give you 1.6 and 1.1 chmbers?... and the 1.6 and 1.1 basically be useless.. sealed side is is too big.... who am i to say anything yes
Damn bro, there easier ways to do things you know? First off a drill would have been easier than using a screw driver. And second you could have put the baffle in before you screwed the last wall on. Hammering it in like that prolly peeled some caulking off the corners and since you didn't use any glue it could potentially caused some leaks.
plywood is an alternative for building speaker boxes but for better results it will need more bracing to reinforce the box and also some polyfiber for the damping
The 10" sub I used is not that powerful....screws & nails can handle the vibration.....I glued inside the box to avoid air leak....thank you for watching!
@@johnlennon1609 Na corrupt po yong drawing files ko sir, wala na po yong box specs...check nyo po channel ko , marami pong ibang design ideas/referrence.....th-cam.com/video/GfyZZLdjtxM/w-d-xo.html youtube.com/@DSWORKS13 ty!
Hey dude, I really like that table you made for the saw. You can change the top whenever you want. Looking at the way you designed it too
Now this is the true definition of handmade! Damn good job!👍👍👍👍
Nice work bench you have there ,,,,
Um grave muito forte e bom , parabéns
Very good wood work!
Thank you for watching Sir....appreciated.
Im confused.... how did you know how much to push the subwoofer baffle plate to give you 1.6 and 1.1 chmbers?... and the 1.6 and 1.1 basically be useless.. sealed side is is too big.... who am i to say anything yes
Muito boa caixa
Nice....!!! I like it..!👍👍👍
Hello my dear, greetings from Colombia. I really liked the design and how super it sounds. Can you share the measurements? like and subscribed
Thank you for watching Sir. Size: 29.25" * 16.00" * 14.00 inches....sealed 1.10 cuft. Ported 1.60 cuft. @ 30hz...
@@DSWORKS13 Thank you
Damn bro, there easier ways to do things you know? First off a drill would have been easier than using a screw driver. And second you could have put the baffle in before you screwed the last wall on. Hammering it in like that prolly peeled some caulking off the corners and since you didn't use any glue it could potentially caused some leaks.
Dude I bet he could rip a tree in half with his bare hands!
I'd hate to shake hands with him if he was in a bad mood! Crunch!
How to calculate that box, sir.
Is there from inside or external measurement?
I' am still confuse
Internal sir and don't forget to subtract all bracings including subwoofer displacement....
@@DSWORKS13 okay.. sir.
Thanks for your information.
4th order box is really difficult for me.
There was some audible port distortion.
it's a port noise, it required more flared.....
👍😎
what is the name of the song for check sound
use mdf for better result
How to measure speckers sizes
niiceeee ..
lit
Measurement size?
Ganda ng pangputol mo ng kahoy
Gawa mo ko ng lalagyan ng mga cactus hahahha
@@jodans8529 hahahaha pagawa ka Kay papa Dhoy...may tools nman sya dyan....
Wtf he has a table saw but no DRILL
Hand Exercise Sir hahaha
Rinig ko boses nica 😁
hahahahahaha
Anong sukat nyan
D q msyado nrinig ang bass bos
Panget camera sir, dipo Kaya makapick up Ng low frequencies....diko din gaano malakasan ,,niyyanig kasi bubong Ng kapitbahay.....
@@DSWORKS13 pro s low bass ok xa......kng hlmbwa s trickle illgay yn alin ang ang quality ang bass un lported o 4th order?
U need a drill bro
small port
Tuned to 30 hz Sir....
Never use plywood only use MDF
No available mdf in my area sir....
plywood is an alternative for building speaker boxes but for better results it will need more bracing to reinforce the box and also some polyfiber for the damping
Port inner diameter please?
It's 4" diameter Sir....you experiment the length based on your sound taste....
@@DSWORKS13 nice how actually you created the flare for the pvc pipe?
@@dannyBboy87 I heated the PVC in our gas range then I used my dog plate as my moulder hehehehe no proper tools......
Ganda ng table saw pero walang drill for screw 😅😅😅
Easy lang yung pag iiscrew.
No glue? Who is this guy?😂
The 10" sub I used is not that powerful....screws & nails can handle the vibration.....I glued inside the box to avoid air leak....thank you for watching!
@@DSWORKS13 sir pde po mk hingi ng measurement nia po,
@@johnlennon1609 Na corrupt po yong drawing files ko sir, wala na po yong box specs...check nyo po channel ko , marami pong ibang design ideas/referrence.....th-cam.com/video/GfyZZLdjtxM/w-d-xo.html
youtube.com/@DSWORKS13 ty!
If u make T line ported box of same size ..it will give u more output than this.
Mura rin lng nmn ng stikwell 😅
tama ka sir......masyado lng nagmmadali kasi.....