Voca racing exhaust installation| Part 2 (am6)

Part 1: • Voca racing exhaust in...
___________________________________________________________________________
Voca Racing exhaust: bit.ly/382HiT0
Dell'Orto PHBG DS 21mm: bit.ly/37Yquwt
___________________________________________________________________________
Twitter: / its_tbgk
Insta: / tbgk_official
___________________________________________________________________________
Music:
Track: Carl Zeer & Waterbeld & Fearon - Talk To Me [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Carl Zeer & Waterbeld ...
Free Download / Stream: ncs.io/TalkToMe
Track: Audioscribe - Free Fall [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Audioscribe - Free Fal...
Free Download / Stream: ncs.io/freefall
___________________________________________________________________________
Equipment:
camera: Gopro hero 4/ Galaxy s10
Helmet: Sierra II
Motorcylce: Beta 50 rr
Decals kit by Kutvek Graphics
Editing: premier pro
___________________________________________________________________________
#grenzgaenger

[@shwettaraghuvanshi9465]

Whoa!

[@hekaz]

Moro suomalaisille

[@tbgk4776]

I'm not sure what this means

[@kornerukko6567]

@@tbgk4776 "Hey to finnishs

[@ainutoikea3552]

Päivää

[@retusaalemi7102]

katos

[@M4kkaraperunat]

huomenta

[@TigerGaming044]

yo mate you said u removed the restriction but if u dont remove it will ur bike go any faster with the exhaust or will it still go the same speed (45km/h) ?

[@tbgk4776]

It will still go around the same speed unfortunately.

[@Issi-up7on]

Throw a 50quick polini cilinder on and watch in go

[@Elias-pn9hs]

What happend if you dont buy a bigger carberator??

[@few_tv_dk9674]

noting. it runs great with a 17,5. it just neeed a bit bigger jet

[@tbgk4776]

You wont get the best out of the exhaust but it'll still work

[@nakkimies5029]

I dont know wich one would be better on my rieju voca or enox...

[@tbgk4776]

Depends on what you like the most, I'm not sure about the enox but as far as i can see it isnt chrome, and the voca is, so it depends on what you prefer. Performance wise i think they are the same.

[@Issi-up7on]

Yo bro where did you put the long ass spring cuz I can’t find where it goes lol

[@axelhoel6300]

Does the exhaust come with any restrictions?

[@tbgk4776]

Yes, unfortunately, and it's a bit hard to remove

[@kaapohartikainen6761]

What is the long spring for?

[@tbgk4776]

i couldn't figure that one out either so no idea haha

[@matco-zac0882]

Do you have to buy a better quality cylinder if you are going to run it as a 50 cc, or can i krep the original 50 cc cylinder?

[@tbgk4776]

Hi don't know if you still need an answer but mine worked fine with the oem cylinder but did perform a bit better with the aftermarket one

[@maf_k4810]

Hey bro, let's see if you can help me or someone. The exhaust part (voca chromed) of the scarf, the fat part, do you know if it can be connected to the original exhaust that comes with the beta? I mean the original silencer (min 1:05), I don't know if you understand me.

[@tbgk4776]

Sorry for the late reply, im guessing you dont need an anwser anymore but i think its possible. However i haven't tried it so

[@maf_k4810]

@@tbgk4776 thanks bro for your answer, recently they have released a new model of the voca chromed for the beta rr 50 2021 that does allow you to do that

[@jooo4283]

what else did you change? did you change the main jet?

[@tbgk4776]

hey sorry for taking so long to respond, i'm guessing you already have the anwser but yes i did, for the carb i'm using (Dell orto 21mm) I'm using a 102 jet

[@nikolajandersen356]

@@tbgk4776 hello, i also switched to at voca exhaust, mine just goes under the frame:) but how much top speed did you get with the original carburetor and with the 21mm carburetor ?

[@tbgk4776]

Atm I have 96 km/h on a flat road, how many did you get?

[@bledz_tvpx]

yo bro i have bought also this voca exhaust but i still have everything standard also my beta, if I get out the limiter out of the voca exhaust how much faster would it be?

[@tobihd8650]

If you take out the speed limit in the CDI and drive with the original translation, your Beta will go 70-80 km/h.

[@tbgk4776]

If you take out the limiter you'll gain about 15kmh. You can increase this by changing the gear ratio (like 13 front and 50 rear) and i also got a 21mm carburator that helped get more performance. I'm currently getting 90, 95kmh

[@youri6302]

Does the standard silincer also fits on the voca expansion?

[@tbgk4776]

I haven't tried this, it looks like it might but im not sure

[@aleksi4621]

Will this work with a 16mm carb? i have bought this exhaust but can't really find the correct carb adjustments.

[@tbgk4776]

For sure. I just went to 21mm to get the most out of it but 16mm is no problem

[@NachoNano331]

you'll have to change the nozzle in the carb to around 95. id say the standard nozzle is 75.

[@tibomeulemeester5038]

@@NachoNano331 more around 110

[@baulq8582]

Is it a very loud exhaust

[@tbgk4776]

Well you can definitely hear it but it can sometimes be a bit much

[@fogel1058]

How loud is it? Is it alot louder than the original?

[@eliottakmetsson9612]

No

[@fogel1058]

@@eliottakmetsson9612 aa bit late answer. Bought a couple months ago

[@robbe_m2890]

did you get the speed limiters out?

[@tbgk4776]

Yep, there is about a 20 km/h difference with it in

[@sijuix5683]

Would you say its a big difference compared to the original exhaust?

[@tbgk4776]

Definitely, i gained about 10 kmh with just the exhaust, and power in the lower gears was improved as wel

[@steefansalling1093]

what cylinder do you have on it?

[@few_tv_dk9674]

it is a 50cc

[@tbgk4776]

50cc airsal sports cylinder, improved the performance a bit