Making parametric design wall [art wall]
ฝัง
- เผยแพร่เมื่อ 31 ธ.ค. 2021
- This is the art wall production and installation process of Chilgok National Forest Gymnasium in Korea.
It is a bulky work that contains a total of 40 birch plywoods.
It came out almost similar to the sketch, so I finished it pleasantly.
The manufacturing process was harder and more difficult than installation, and above all, the loading process was more difficult than expected because it was bulky.
It seems to have the charm of a parametric design that can create a formative and special atmosphere on the plain wall.
Once again, I would like to express my gratitude to those who helped with the production and installation.
thanks to.
Sommet studio: / __sommet
Mont studio : / montstudio_
Joywood: / joywood_2010
Material: Birch flywood
Instagram: / handwerker_kor
Blog: blog.naver.com/24design
Business Inquiries: 24desig@naver.com
#Hantberker #ArtWall #Parametric - แนวปฏิบัติและการใช้ชีวิต
![한트베르커 - 스탠드 조명 제작과정 [Making walnut stand lamp]](http://i.ytimg.com/vi/uMrGgJRx2pQ/mqdefault.jpg)
![[Full] อังคารคลุมโปง Close Up EP.49 | คนใกล้ผีคนที่ 49 : หมอฉุกเฉิน “หมอบอส” (Thai Sub)](http://i.ytimg.com/vi/dKPUaX7UxMQ/mqdefault.jpg)
![จังหวะนี้ - เม้ก อภิสิทธิ์ [ Official MV ] จอนนี่มิวสิค](http://i.ytimg.com/vi/4gQRZCkRyiU/mqdefault.jpg)
Only change I would make is to use full plywood sheet instead of the horizontal battens. That way they don’t disrupt the view from a head on angle.
yeah, even 4mm - 6mm would do the trick
This is a matter that has been fully negotiated with the client.
That approach has been considered, but there are other reasons for not doing so.
Exactly, I just said the exact thing. The battens kind of spoil it a bit. But it is beautiful
I thought it also spoiled it, but i imagine it is good to have for structural integrity due to its height; however, a slightly curved batten wouldnt cast a shadow as the existing one does so could be nicer on the eye.
Or paint the wall and battens black so they're invisible and up the contrast of the wall it self
Technology mixed with creativity, beautiful work.
Thank you for the video
언젠가.한번 해보고픈 작업입니다! 멋져요
very beautiful indeed! Congratulations!
Excelente trabajo 👍👍👏👏👏👏
This is gorgeous!! Bravo! ❤
아름다움이 느껴지고..뭔지는 몰라도 뭉클해 지네요~~
힘이되는 응원의 말씀 감사합니다!
Отличная реализация! 👍
워메 멋져요. 목공의 다양한 작업들을 소개해 주시는 멋진 채널입니다!
ㅎㅎ 새해 복 많이 받으시고 건강 관리 잘하세요!
와.. 아름답네요
Oh wow. Its the best thing I have seen in ages. I LOOOVVVEEE it!
Absolutely wow!
Absolute Masterpiece, thanks for showing the brilliant manufacturing process!
Super fantastic 👍👍👍
Excelente trabajo, muy loable, saludos desde Puerto Montt 🇨🇱
Fantastic project perfectly done.
Thanks for watching! happy new year!!
Great work
Fantastic!!!
메이킹 영상 찾다가 보니 홀린듯이 들어와서 영상보고 있는데
솜씨가 매우 좋으시고 작업하는 모습도 깔끔해서 보기 좋아요
멋있습니다
좋은 말씀 감사합니다!
Amazing. I would make covers in between so you do not see the construction.
Nice job great imagination
Beautiful !👍🇭🇷
Amazing work ! 👏
Beautiful
Beautiful!
BEAUTIFUL!!!
The middle horizontal bar turns something that would be 100% awesome into 95%
With everything looking like a new installation why not replace the offending middle brace by screwing in from the other side of the wall. It would make it harder to remove later but if they can afford to install it they should be able to afford ripping out the wall later.
Yes. Also, the feeling that it is installed in what could be a basement rec room brings it down. Somehow for me that beautiful woodwork does not relate at all to the setting.
WoW magnifique!😮
대박입니다
대박 감사합니다! ㅎㅎ
와...작품이네요
Beautiful work! I feel bad for whoever has to dust that thing...
Giant and gorgeous
와우~
이거슨 예술이여
감사합니다 ㅎㅎ
So. So good.
This would be such a great acoustical diffusor❤❤❤
great done,.. would be interesting to hear the sound before and after installation ,.
와 작품이다!!!
Nice work man
멋집니다~~
감사합니다🙌
CNC의 표현력.. 정말 아름답습니다
그렇죠 사람의 손으로는 분명한 한계가 있습니다!
와..정말 표현하기 어려울 정도로 멋집니다🙏
감사합니다 ㅎㅎ 행복한 한 해 되시고 좋은 작업 이어가시길 바랄께요!
어후.... 예술이네요...
Very cool..
Impressive👏
thank you!
Wow 🤩
Красивая работа...
나무의 결이 모여 물결이 된 것 같아요! 멋집니다 :) 실제로 보았으면 더 좋았을 텐데 너무 아쉽네요.👍👍👍
만들고 설치가 좀 힘들었는데 그래도 설치하고 나서 기분이 매우 좋았습니다. 감사합니다!
간단하게 혼자서 유튜브 보면서 인테리어 벽틀을 짜는 것도 벅차던데 이렇게 섬세한 작업을 하는 걸 보면 경외심이 생깁니다.
안녕하세요 저는 벽틀도 짤불모릅니다 ㅎㅎ 다 본인의 전문 영역이 있는 것 같습니다. 저조차도 인테리어 내장하시는 분들 보면 존경스럽습니다 ㅎㅎ
응원 감사합니다!
That's really beautiful and super awesome. The shapes are very nice. Hopefully you had each one numbered hahaha just enough support and fixation not to disturb the eyes, fantastic!! 🧡🧡
here are so many things that can be done with wood that there are many works to be shown in the future. Thank you for your support that always gives me strength. Happy new year!
@@handwerker_kor endless possibilities and with the CNC you can have even more experiences. Also, you worked with other woodworkers so you can share different point of view and ideas. You're very welcome, it's such a pleasure to watch your works. Happy new year!!
Avrei dipinto di bianco come la parete i montanti sostengno dei pannelli. Bel lavoro !
Грандиозная работа. Молодцы. Не секрет , во сколько финансово, обошелся этот проект. Привет из России.
I don't like the look of the horizontal bar/plank. However, I don't know what techniques (not a wood worker) could replace it. Without it, I assume, there would be warping.
Perhaps a full length vertical plank would look better?
That's the only nitpick. Good job on this!
The horizontal support is disastrous for a job of this scale. A bad decision to make such a minimal structure. The scale of the work would have deserved a more professional finish and decisions. Unfortunately, this is what happens when the customer limits the budget and the manufacturers want to show off. But the result is a lack of consistency. A lack of maturity! But the effect is extraordinary.
I figured that the back wall would have been black along with the connecting pieces on the back of the wall to hide them.
Красиво, работа титаническая. Звукопоглощающая стена. Единственный минус это пыль между панелями.
Awesome! Now who's going to dust it every week? Good luck with that!
The way you spaced the vertical battens with a spacer block is simple but very effective. Gorgeous work and great video, just subscribed!
That's right. I thought it was the only way not to hurt the whole atmosphere while being simple.
I paid a lot of attention to the structure, but thank you for recognizing it.
Next time you do one of these, perhaps a thicker ply panel for the backing strips and then cut channels for each of your panels to slot into. Would eliminate the need for a spacer then
Great idea but unlike MDF, plywood thicknesses can be inconsistent depending on the manufacturer. I've seen up to +/- 0.5mm which could lead to channels that are either too tight (a nightmare to fix) or too loose (visible gap). In addition a lot more milling on the CNC and the larger back panel would add material and paint labor cost. I feel the approach Handwerker took in this video is very effective! @@w2ttsy670
@@Furnitecture Wow, you're so wise.
There's a reason for that
Why don't people have an insight into this situation?
Thank you very much.
To good to place it inside a basement room..what a waste ...to bad ! ..great job thought
쵝오.....
올해 쵝오 힘들었던 작업이죠 ㅎㅎ
참 멋지고 예쁜대..... 저런식으로 만든 벤치와 의자 디자인이 생각납니다.... 그런대 나중에 청소하려면.... 그런 생각이 드는 조형물이내요 잘보고 갑니다
네 ㅎㅎ 먼지 잘 붙게 하려고 마감도 신경써서 하는거니까요 외국 사례가 많은 파라메트릭 디자인입니다!
yo bro this is crazy
стена покрасили бы в серый и крепежные палки в серый, и тогда бы их не так было бы видно, чем на белой стене. Тень падает на горизонтальный элемент и его видно. А так круто получилось!)
прекрасно провел 10 минут, спасибо, вы делаете шикарные вещи
지린다...
Great and beautyful job. Greetings from germany to Handwerker.
Was bedeutet Handwerker nicht für einen Menschen, der in einem Fachgebiet arbeitet?
Sind Sie auch eine Person, die nur eine ganze Reihe von Dingen macht?
Mein Lehrer hat es für uns gekocht.
@@handwerker_kor "Handwerker" is commonly understood by every german speaker (even by children). The specialisation would be Tischler (literaly someone who makes tables) who makes doors, windows, wall or ceiling panels.
I'm not a Handwerker. Only interested as a hobbyist.
Nice 👍 though cleaning would be hard
Wonder
Good luck dusting it and keeping it clean. Maybe some spot lights or LED lights behind it will be good.
After we installed it, we probably installed spots and lights on the ceiling.
Thank you for your advice.
I guess you live in a time with feather dusters instead of small handheld blowers? Does your house also have candles instead of lightbulbs? I bet you hate EVs too
🙌
From India
you know what will be HELL cleaning it!
A lot of works were spent bur for me it is looks like dust collector.
con que programa diseñasteis el muro y numerasteis las piezas para su mecanizado?
I think that it can be more than just a wall with a wavy surface. This can be some sort of a book shelf or a place to hang out things. This can generalized to modular furniture. These installations may have actual function.
Yeah, that's a good idea. But we ran a project that was built and designed to meet the client's needs.
@@handwerker_kor True, there is a program specified by the one who provides the money. That's what architecture is about, service. At the same time we can persuade our clients suggesting more ideas on the same object they want. Yes everything costs but the best reward is the satisfaction of all the users that will interact with it. We build for those people too, for their dreams, hopes and possibilities.
Теперь я знаю как собирать пыль
All that work and effort and you leave it in bare wood. A decent lacquer in that would have taken it to a whole new level
👍👍🙏🏻🙏🏻
It's a nice video, guddos to the team. May I please know, how would you estimate the cost for this parametric structure?
Is it purely decorative or does it have a function like acoustic for example?
CNC es una maquina ecepcional, permite hacer trabajos como este muy facil
Beautiful! I had to laugh at the installation though.... The whole time I was watching I was saying to myself "That ceiling had better be perfectly level.." You might have cut that a LITTLE close? (Always remember, no-one can see a small gap at the top!)
made it 10mm smaller than it actual measurement.
Measure twice, install once.
우와 이런 규모의 작품은 얼마정도 할까요.. 비쌀것 같네요 ㅎㅎㅎ
🤩😍
Milion plywood sheet 😮😮
$$$$$ time
Amazing!
Price?? 14.000 USD?
Прекрасный пылесборник. :) Мечта любой уборщицы.
How did you guys create the file for that. Its awesome
awesome! what was the cost of the wall to the customer?
Hey guys, there's three huge wrinkles on the wall you didn't flatten. I have a good eye for these things.
Je serais curieux de savoir ce que ça donne acoustiquement. Après tout cela peut faire office de réflecteur.
É autolimpante???
what a fantastic outcome! looks amazing.
Can I ask you what software you used to design this?
hello!, thanks for your support! i used rhino and fusion360!
@@handwerker_kor can I have your contact details please. 🇿🇦
Wood must be cheap in China .
Do you know how much that wall would cost in America?
😅
how is this a parametric design? what parameters it was based on?
God
와..너무 멋집니다. 제가 오디오로 음악듣는걸 너무 좋아해서 개인공간에 리스닝룸을 만들려고 하는데 너무 도움을 받고 싶네요. 연락처라도 알려주시면 바로 연락드리겠습니다
안녕하세요 댓글이 늦었네요. 010-2382-0004입니다
How much does it weigh?
👍✨👍✨👍✨👍✨👍✨👍✨👍✨
What's that "HANDWERKER" font at 10:30? It's beautiful!
The font is specially made for our logo.
고정용 바 형태의 몰딩이 너무 잘 보이네요.
뒷면을 바 형태의 몰딩이 아닌 전체를 판넬로 막았으면 더 좋았을 것 같네요.
댓글로 여러번 계속 이야기 하게 되는데요.
설계과정에서 충분히 협의가 된 사항입니다. 뒷판을 막는게 원래 모델인데, 여러 상황과 조건 때문에 보조목을 활용하기로 한 것입니다. 그런 세부사항을 다 나열할수 없기 때문에 저도 무척 답답합니다.
너무 잘 만드셨습니다. 마감은 어떻게 하셨는지요??
저도 한번 시도를 해보려합니다
마감은 우선 판재 상태에서 uv중, 상도 코팅을 하고요 가공 엣지면을 바니쉬 작업했습니다 좋은 작품 기대합니다~
@@handwerker_kor 네 좋은 정보 감사합니다 ~~
안녕하세요. 영상 구독하여 잘 보고 있습니다. 감사합니다! 혹시 이 영상에서 사용하는 CNC 모델명 좀 알 수 있을까요? ^^
안녕하세요 렉슨 RXR-2450L 입니다
the visible horizontal wood backing is a bit disturbing