FYI. You're steering dual rate only needs to be at 75 to get full steering throw. Anything more will be putting strain on the servo at full steering lock.
FYI I am well aware of what it does and this does not work on mine I need the full amount not all rc's act the same even if its the same model fyi manufacturing tolerances
Hybrid / mixed mode obviously does not make any sense for cars, that's intended for airplanes where you mix rudders. The light switch of course should work regardless of the channel mix setting.
Its wierd and honestly dangerous because you turn the wheel and the car takes off definitely should have been disabled for ground use but like I showed it does effect the lights press on channel 6.they worked lol
Thank you very much for that information. Much needed yeah had gyro shacking. I've subscribed and i put Louise Mt cyclone 2.8 tyres and it's helped with backflips. And moved battery for better balance. To much weigh on the front. Again thank you mate 👍😄😄
@L2theW: As you apparently have been playing around quite a bit with settings, have come come across a way to program the ESC? From what I've seen on YT, the brakes would need to be tuned down but that typically only works via programming the ESC:
I dont see any way to program the esc at all personally I have not found the brakes that hard at all maybe it was the early versions they sent out to TH-camrs.
Search esc brakes hack on YT. Should work with most transmitters and i don't see a reason it doesnt work with this one. But i havent tested it, still waiting for a box to show up
@philote09 razor rc manipulated a remote on a team associated rc thats all I know of your not going to be able to with this remote I wouldn't stress over it the brakes are not bad at all no problem with air control at all
This radio is universal. You can use it with more than just this model. The hybrid mode is for using two ESCs instead of an ESC and a servo. It is for tank controls. One ESC goes forward and the other reverse when no trigger input is used, and when trigger is used they both go forward and backward while the steering reduces or increases one side or the other. Works great for my Kyosho Blizzard.
All controllers are designed to work with a reciever regardless of cars. Now I heard this was set up for planes which did not make sense I fly planes and dont use a steering wheel remote now a tank that makes sense thank you for the info.
The Turbo mod works. Just try it while running the rig. With Turbo mod on it wheelies much more than without. Don‘t ask me why but I have to push the channel 3 button mostly twice to get the Turbo mod working. Unfortunately I have still to deal with an other issue: my backwards speed is somehow about 2km/h. No idea why. Rest works just fine and I like the OT a lot.
I tried while running it I did not see any boost in performance maybe if I try on the original weaker battery I will see it or mine just doesnt work who knows lol but with the new packs I have it wheelies for days. Backwards is always slow but that does sound excessively slow I dont know what to suggest sorry I really wish there was a tuner for the esc but yeah its a cool little rc I enjoy it
Thanks for the video I was wondering my factory battery flashes red all the time so I wind up leaving the battery on charge until a day later when it finally stops flashing red any info on that as to why it does that or am I the lucky one, thanks for the help.
Sounds like your power supply what you are using to power the usb charger is not powerful enough. Look at the amp rating on it. personally I have a couple of them I use by Anker tha are 65 and 75 watts that would charge this no problem maybe if your cell phone has a fast charger try that or use your computers usb it might be better. I would just look up a charger on Amazon and get that probably cheaper than the Anker power supplies. I have a nice little charger but it does not have this battery connector on it. I bought an adapter and use my Spektrum smart charger with it. Its small but its still a 3s lipo it needs power to get it charged up so I suspect your power supply is very small thats why its taking forever
You can do both if need be. I cant remember exactly how the trim on the remote works I believe its the left and right arrow on top I do not remember if you need to touch anything first but I dont think you do. I put mine on a basic dumbo remote and reciever and haven't looked back I can quickly adjust the gyro no crazy menus for stuff
I flip it once and after that it start to go full throttle and I couldn’t stop it until I had to turn it off from the car. It kept stuck in full throttle not responding to the controller? What’s the issue you think please?
@ramikalasho7430 is it when you steer it throttles? There is a tank mode that you can activate with the lower button with two criss cross arrows keep pushing the button until it works normal. It could be a receiver issue or you hit the throttle trim to max hard to say for sure
@ramikalasho, my sons did that, check all the plugs on the electrical components. I found the one connection was almost unplugged and I believe the shock knocked it loose and the poor connection messed with things. I fixed the loose plug and it works perfect now.
This was really helpful. Another problem I'm having is when I turn on the controller I get no throttle I have to press the hybrid button 3 times to get it to work normally. I didn't have this problem when I first got it . Accidentally pressed some buttons on the controller now I have to go through the hybrid button mode to get it to go any suggestions?
That is weird I have no idea what happened there sorry. I would look in the manual see if there is a factory reset or contact Rlarrlo maybe there is a esc or transmitter failure
@CofFDnSnaps I agree I put mine on the Dumbo and haven't looked back. Its nice to just move a knob for the gyro and not the whole other process. I hope you enjoy it on the new radio I think you will.
@@L2theWcarscoffeelife thanks man. I am actually waiting for the truck to arrive. Been studying what owners have learned about it. Once I figure out the right screw size, I plan to order titanium screws for the upper shock mounts. Ive seen thats a weak spot. I will probably do some of the aluminum mods like the front and rear and knuckles and the servo saver. Ill beef up the diffs when they break.
I broke one of mine so yeah I would say it probably is weak but like my rep at Team Corally told me as far as thier design they make it the weak point its a fuse to save the shock brace and shock. I actually just got titanium screws for the wheelie bar because they bend I need to go run the rc and test it out thanks for reminding me I have so many cars and stuff I do these repairs and forget lol
@can you please help me. My car wont move unless its on channel 1 woth the turn controls for throttle No power for reverse or forward on every other channel
Push the button that has the 2 arrows that chris cross there are like 3 modes only the one mode will make it work right one mode when you turn the wheel it takes off
Lost or broke the dog bone from the center diff, broke the front diff or broke the center diff usually if it spins freely check the drive shaft out of the center to the front
Its in the manual but the remote is way complex I dont like it. So the button on the lower right on top of the controller hold it down then power it on that unlocks it. The first time I took it out I hit the combo button I went to test the steering the damn thing took off lol
What exactly is happening? Do you still.have steering or is the whole dead? Might sound dumb but is the battery charged? Verify with a checker not a charger. You need the body off and watch is there a light on the esc? Pull the cover off the receiver is the light on for it? You can have a bad transmitter, reciever, esc or battery another option could be the motor is gone and the esc is shutting off because it sees a short.
hello there, i had the same issue and ur video help me a lot there. But now i got another probleme, my transmiter got a Lock icone in the screen, and i cannot get the gyron setings anymore, anyone can help me out there ? how to remove this LOCK icone on transmiter ? thx !
@@L2theWcarscoffeelife Yeah thx ! Btw i got another issue, when i release the trigger now the car brake, and i noticed i got the 2 triangle activated now on the top of my transmiter. Any idea how i can disable this ? The car braking when it not accelerating is rly anoying ... :/
Try the button with the 2 arrows that criss cross its one of the 2 on the bottom it has 3 modes I believe you dont want any icon. I dumped the remote installed a dumbo receiver with a gyro and it works way better in my opinion I can adjust the gyro from a knob no lock or other modes that shouldn't be there. If that doesn't work make sure the trim on the throttle is nuetral if you adjust it up it might see center as reverse and put the brakes on or recalibrate the remote to the esc that is in the manual I dont know how to I never did that hope thay works
There customer service is absolutely shit. They will never respond and do not care one bit. I purchased one of these the carbon fiber edition over a week ago when their website clearly said they had 19 in stock pay 20 extra buck for express shipping 3-5 days and and my order is still unfulfilled after a week I'll send email after email with no reply and also their help chat online yeah good luck getting ahold of someone on their. This is ridiculous I've even been trying to get a refund for the last week and no one will answer back. Horrible, be careful with this company fell as if I have been robbed
Damn sorry to hear that I ordered mine it said 3 to 400 in stock I thought the pre order was over still took 2 months. I emailed them and they did respond told me its still a pre order then it got pushed back the rc is cool but the company and its shipping needs work for sure I hope you get it sorted out.
FYI. You're steering dual rate only needs to be at 75 to get full steering throw. Anything more will be putting strain on the servo at full steering lock.
FYI I am well aware of what it does and this does not work on mine I need the full amount not all rc's act the same even if its the same model fyi manufacturing tolerances
Hybrid / mixed mode obviously does not make any sense for cars, that's intended for airplanes where you mix rudders. The light switch of course should work regardless of the channel mix setting.
Its wierd and honestly dangerous because you turn the wheel and the car takes off definitely should have been disabled for ground use but like I showed it does effect the lights press on channel 6.they worked lol
Thank you brother 👍
Thank you very much for that information. Much needed yeah had gyro shacking. I've subscribed and i put Louise Mt cyclone 2.8 tyres and it's helped with backflips. And moved battery for better balance. To much weigh on the front. Again thank you mate 👍😄😄
@L2theW: As you apparently have been playing around quite a bit with settings, have come come across a way to program the ESC? From what I've seen on YT, the brakes would need to be tuned down but that typically only works via programming the ESC:
I dont see any way to program the esc at all personally I have not found the brakes that hard at all maybe it was the early versions they sent out to TH-camrs.
Search esc brakes hack on YT. Should work with most transmitters and i don't see a reason it doesnt work with this one. But i havent tested it, still waiting for a box to show up
Thanks, will try. Still waiting for my box to show up, too...
@philote09 razor rc manipulated a remote on a team associated rc thats all I know of your not going to be able to with this remote I wouldn't stress over it the brakes are not bad at all no problem with air control at all
@insanebmxthomas not going to work on this not like its a common hack razor did it on 1 car
Another great informative video!😎🤙🏽
@@basherz_den thank you very much
Now I’m going to mess around with the turbo feature
Lol let me know if you crack the code
@@L2theWcarscoffeelife I have time to dig into that whole turbo deal now… I’ll let you know
There is a turbo lead wire that should be in channel 3…turbo is activated with one click of swa button to turn on and again to turn off🫡
This radio is universal. You can use it with more than just this model. The hybrid mode is for using two ESCs instead of an ESC and a servo. It is for tank controls. One ESC goes forward and the other reverse when no trigger input is used, and when trigger is used they both go forward and backward while the steering reduces or increases one side or the other. Works great for my Kyosho Blizzard.
All controllers are designed to work with a reciever regardless of cars. Now I heard this was set up for planes which did not make sense I fly planes and dont use a steering wheel remote now a tank that makes sense thank you for the info.
The Turbo mod works. Just try it while running the rig. With Turbo mod on it wheelies much more than without. Don‘t ask me why but I have to push the channel 3 button mostly twice to get the Turbo mod working. Unfortunately I have still to deal with an other issue: my backwards speed is somehow about 2km/h. No idea why. Rest works just fine and I like the OT a lot.
I tried while running it I did not see any boost in performance maybe if I try on the original weaker battery I will see it or mine just doesnt work who knows lol but with the new packs I have it wheelies for days. Backwards is always slow but that does sound excessively slow I dont know what to suggest sorry I really wish there was a tuner for the esc but yeah its a cool little rc I enjoy it
Thanks for the video I was wondering my factory battery flashes red all the time so I wind up leaving the battery on charge until a day later when it finally stops flashing red any info on that as to why it does that or am I the lucky one, thanks for the help.
Sounds like your power supply what you are using to power the usb charger is not powerful enough. Look at the amp rating on it. personally I have a couple of them I use by Anker tha are 65 and 75 watts that would charge this no problem maybe if your cell phone has a fast charger try that or use your computers usb it might be better. I would just look up a charger on Amazon and get that probably cheaper than the Anker power supplies. I have a nice little charger but it does not have this battery connector on it. I bought an adapter and use my Spektrum smart charger with it. Its small but its still a 3s lipo it needs power to get it charged up so I suspect your power supply is very small thats why its taking forever
Hello bro. How to to get it go in a straight line ? I can get the steering straight? Can i get it done through the car or the remote it self
You can do both if need be. I cant remember exactly how the trim on the remote works I believe its the left and right arrow on top I do not remember if you need to touch anything first but I dont think you do. I put mine on a basic dumbo remote and reciever and haven't looked back I can quickly adjust the gyro no crazy menus for stuff
I flip it once and after that it start to go full throttle and I couldn’t stop it until I had to turn it off from the car. It kept stuck in full throttle not responding to the controller? What’s the issue you think please?
@ramikalasho7430 is it when you steer it throttles? There is a tank mode that you can activate with the lower button with two criss cross arrows keep pushing the button until it works normal. It could be a receiver issue or you hit the throttle trim to max hard to say for sure
@ramikalasho, my sons did that, check all the plugs on the electrical components. I found the one connection was almost unplugged and I believe the shock knocked it loose and the poor connection messed with things. I fixed the loose plug and it works perfect now.
This was really helpful. Another problem I'm having is when I turn on the controller I get no throttle I have to press the hybrid button 3 times to get it to work normally. I didn't have this problem when I first got it . Accidentally pressed some buttons on the controller now I have to go through the hybrid button mode to get it to go any suggestions?
That is weird I have no idea what happened there sorry. I would look in the manual see if there is a factory reset or contact Rlarrlo maybe there is a esc or transmitter failure
Thanks ill try to contact them as well read the manual @L2theWcarscoffeelife
Nothing in the manual. I emailed rilarlo just waiting on their reply. The esc blinks when you first start the car like if it's a neutral position.
I plan to swap the transmitter and receiver for a Radiolink set with the gyro. Should be much smoother.
@CofFDnSnaps I agree I put mine on the Dumbo and haven't looked back. Its nice to just move a knob for the gyro and not the whole other process. I hope you enjoy it on the new radio I think you will.
@@L2theWcarscoffeelife thanks man. I am actually waiting for the truck to arrive. Been studying what owners have learned about it. Once I figure out the right screw size, I plan to order titanium screws for the upper shock mounts. Ive seen thats a weak spot. I will probably do some of the aluminum mods like the front and rear and knuckles and the servo saver. Ill beef up the diffs when they break.
I broke one of mine so yeah I would say it probably is weak but like my rep at Team Corally told me as far as thier design they make it the weak point its a fuse to save the shock brace and shock. I actually just got titanium screws for the wheelie bar because they bend I need to go run the rc and test it out thanks for reminding me I have so many cars and stuff I do these repairs and forget lol
@@L2theWcarscoffeelife sounds like a great problem to have!
@can you please help me. My car wont move unless its on channel 1 woth the turn controls for throttle
No power for reverse or forward on every other channel
Push the button that has the 2 arrows that chris cross there are like 3 modes only the one mode will make it work right one mode when you turn the wheel it takes off
My front wheels just spin freely. What's the problem
Lost or broke the dog bone from the center diff, broke the front diff or broke the center diff usually if it spins freely check the drive shaft out of the center to the front
@@L2theWcarscoffeelife ok thanks
My remote shows a lock and won’t let me use any of those gyro setting or the two next to the power button
How do I turn that lock off
hold down the bottom right button as you turn the remote on
@@L2theWcarscoffeelife thank you the instructions was saying the down button on the x part
You all can think me later , TURBO MODE IS CHANNEL 2 ON THE STREEN ,WHEN YOU SEE CHANNEL 2 NO OTHER CHANNEL SHOULD BE SELECTED
@@rideordie2736 I THREW AWAY THE FACTORY REMOTE ITS JUNK TURBO MODE DOESN'T DO ANYTHING GET RID OF THE REMOTE THANK ME LATER
I'm dumb, just got my carbon edition and the remote has a lock symbol on the screen, can't change anything, can drive the car however, what the heck?
Its in the manual but the remote is way complex I dont like it. So the button on the lower right on top of the controller hold it down then power it on that unlocks it. The first time I took it out I hit the combo button I went to test the steering the damn thing took off lol
@@L2theWcarscoffeelife
Dude, you saved me! I tried to find something on it but I reckon I overlooked it, thanks so much!!!!
@@L2theWcarscoffeelifeI’ve been lookin all over Google for this right here. You’re a hero
Does anyone know why mine just keeps turning off after like 30 sec I have the same rc car
What exactly is happening? Do you still.have steering or is the whole dead? Might sound dumb but is the battery charged? Verify with a checker not a charger. You need the body off and watch is there a light on the esc? Pull the cover off the receiver is the light on for it? You can have a bad transmitter, reciever, esc or battery another option could be the motor is gone and the esc is shutting off because it sees a short.
Hello my friend after 2 months you know how can you activate the turbo button (turbo mode? Beautiful greetings from Italy
@rcmarco supposedly you press the channel 3 button on the handle of the remote and its supposed to kick on personally I never saw anything from it
hello there, i had the same issue and ur video help me a lot there.
But now i got another probleme, my transmiter got a Lock icone in the screen, and i cannot get the gyron setings anymore, anyone can help me out there ? how to remove this LOCK icone on transmiter ? thx !
Push the lower ⁸right button on the top of the transmitter and turn it on that will unlock it
worked, my fault, read that on manuel later ! thx !
@FoxThor14 no problem glad to help
@@L2theWcarscoffeelife Yeah thx ! Btw i got another issue, when i release the trigger now the car brake, and i noticed i got the 2 triangle activated now on the top of my transmiter. Any idea how i can disable this ? The car braking when it not accelerating is rly anoying ... :/
Try the button with the 2 arrows that criss cross its one of the 2 on the bottom it has 3 modes I believe you dont want any icon. I dumped the remote installed a dumbo receiver with a gyro and it works way better in my opinion I can adjust the gyro from a knob no lock or other modes that shouldn't be there. If that doesn't work make sure the trim on the throttle is nuetral if you adjust it up it might see center as reverse and put the brakes on or recalibrate the remote to the esc that is in the manual I dont know how to I never did that hope thay works
I need help bro my transmitter is in lock mode😢
Turn it on holding down the bottom button on the right
There customer service is absolutely shit. They will never respond and do not care one bit. I purchased one of these the carbon fiber edition over a week ago when their website clearly said they had 19 in stock pay 20 extra buck for express shipping 3-5 days and and my order is still unfulfilled after a week I'll send email after email with no reply and also their help chat online yeah good luck getting ahold of someone on their. This is ridiculous I've even been trying to get a refund for the last week and no one will answer back. Horrible, be careful with this company fell as if I have been robbed
Damn sorry to hear that I ordered mine it said 3 to 400 in stock I thought the pre order was over still took 2 months. I emailed them and they did respond told me its still a pre order then it got pushed back the rc is cool but the company and its shipping needs work for sure I hope you get it sorted out.
Hello.
hello my friend