Very nice! I love this setup, you did a great job and I believe you've saved a lot of money which is a smart way to do nowadays. I refused to buy from RV Dealers, they are nothing but crooks, every RV they sell are way overpriced and if you noticed they don't have the small ones that are cheaper on the lots, all they carry is the most expensive one. Dirty crooks, I can't stand them. But I like what you did, save tons of money for sure! Keep it up my friend! 😊👍
Looks good mate, just wondering about, about the amenities, shower, toilet and I'm guessing when off grid you set up the solar blanket to charge batteries. Enjoy
Nice trailer conversion mate. Im a tradie that has a 7 x5 box with sides and canvas roof that fits queen mattres. We dust proofed ours with axle flip, 31 in tyres AT hitch and 12 v throughout. We're doing a 1 month loop stint of Sydney, Birdsville, Normanton Cooktown then Fraser and back, but you gave me a few ideas. Happy camping mate
Can I give you tips. Get soda stream, buy co2 2.5kg gas bottle and fire ext mount and hose adaptor. Next the flat mounts good. But I have used pipe. With a small pipe welded 45 degrees. Now it fits a 25watt oztrail camp light. Check lock your hubs video. High lift jack. I have made a longer handle with pins. Now I can winch, and use the handle as a ground steak for the oztrail light. Also check his video voltage reg and fridge cover.
Yeah cheers mate, don't know if I'll get a soda stream but yes fire extinguisher definitely on the list. Yeah trying to figure out the best place to mount my recovery boards atm not too sure where I'm gonna put them yet. I prefer having portable solar as I always park in the shade where I can so then I just pull my panel out to wherever I need it. I like bottle jacks which I have, as they take up less room and are a lot safer, and yeah I have a small wind break for my stove just didn't show it in the video. Thanks for all the input mate, hope you enjoyed the video, its always good to get other people's idea on things!
Check seek adventure for table wash tub, and solar panel bracket. You could do something on front with maxtracks and swing up removable solar panel. I have the same stove and made a wind break. If you fish, weld small tube on two star pickets, then you can you to surf fish and then use a two pegs and some old tin for your fire pit wind break. Have a look at ty Fenwick quick pitch tent mod.
Great video mate! Did you have to register the trailer if you are only using it for camping? Also if you did register, how was the process, was there much involved? Thanks and keep making these awesome videos 👍
Cool stuff! Thanks for uploading that. Hope you can get to use it soon! Just a quick question, I'm a noob but I'm wondering, all the woodwork inside is held by being the right size or did you bolt it in the trailer?
Hey mate, glad you enjoyed the video!! So yeah the wood is cut to fit into the support bars on the trailer so it doesn't need to be bolted in and it seems super solid. If u want I can get photos to show you
@@twox4x432 thanks heaps for answering me ;) and: aha! and you don't have any issues with that driving it around? like it doesn't bang or rub against anything? This is kinda what I wanted to do, but I have very little experience on the topic so yours is very valuable at this point :D
yeah bro it fits really tight so can't go anywhere, the weight of the fridge and everything holds it down with a good amount of weight aswell so yeah it sits in really good, you could always add some silicone or screws if you were worried but mine isn't gonna go anywhere 👌👍
I like it! Your giving me ideas for mine and answering some questions i had- especially about the hitch and making it higher. . Thanks mate!
Lots of good ideas. Thanks for the video.
Very nice! I love this setup, you did a great job and I believe you've saved a lot of money which is a smart way to do nowadays. I refused to buy from RV Dealers, they are nothing but crooks, every RV they sell are way overpriced and if you noticed they don't have the small ones that are cheaper on the lots, all they carry is the most expensive one. Dirty crooks, I can't stand them. But I like what you did, save tons of money for sure! Keep it up my friend! 😊👍
Well decked out. Ready for anything. Good on ya.
Cheers mate, it's a pretty great set up!
Looks good mate, just wondering about, about the amenities, shower, toilet and I'm guessing when off grid you set up the solar blanket to charge batteries. Enjoy
Nice trailer conversion mate. Im a tradie that has a 7 x5 box with sides and canvas roof that fits queen mattres. We dust proofed ours with axle flip, 31 in tyres AT hitch and 12 v throughout. We're doing a 1 month loop stint of Sydney, Birdsville, Normanton Cooktown then Fraser and back, but you gave me a few ideas. Happy camping mate
Beauty thanks mate, it goes pretty good this set-up ahah
Nice job mate very functional and a great design well done
Cheers mate just finished a week on Fraser with it and it was flawless
That’s awesome 😍👍🏽
Niice setup mate, proves you don't need to spend big coin on a new camper
Very nice, you did a fine job sir !!!
Thanks very much mate!!
Love it bro...we did the same, tent on top of gear hauler! From USA 🇺🇸
Beauty mate!! works so well aye.
A big G'day from downunder 😃👍
Can I give you tips. Get soda stream, buy co2 2.5kg gas bottle and fire ext mount and hose adaptor. Next the flat mounts good. But I have used pipe. With a small pipe welded 45 degrees. Now it fits a 25watt oztrail camp light. Check lock your hubs video. High lift jack. I have made a longer handle with pins. Now I can winch, and use the handle as a ground steak for the oztrail light. Also check his video voltage reg and fridge cover.
Yeah cheers mate, don't know if I'll get a soda stream but yes fire extinguisher definitely on the list. Yeah trying to figure out the best place to mount my recovery boards atm not too sure where I'm gonna put them yet. I prefer having portable solar as I always park in the shade where I can so then I just pull my panel out to wherever I need it. I like bottle jacks which I have, as they take up less room and are a lot safer, and yeah I have a small wind break for my stove just didn't show it in the video.
Thanks for all the input mate, hope you enjoyed the video, its always good to get other people's idea on things!
Question; how waterproof is the tent and how noisy is it in wind?
Check seek adventure for table wash tub, and solar panel bracket. You could do something on front with maxtracks and swing up removable solar panel. I have the same stove and made a wind break. If you fish, weld small tube on two star pickets, then you can you to surf fish and then use a two pegs and some old tin for your fire pit wind break. Have a look at ty Fenwick quick pitch tent mod.
Hey mate I've replied to your other comment 😃👍
Great video mate!
Did you have to register the trailer if you are only using it for camping?
Also if you did register, how was the process, was there much involved?
Thanks and keep making these awesome videos 👍
Awesome rig mate
Cheers mate!! I love it atm still heaps i want to do to it though
Your companion stove why did you not go with 12v invertor stove top ? Are they no good
Awesome set up mate. 👌
Thanks so much!! Hope you enjoyed the video 😃
@@twox4x432 I did mate. Can't wait to see some solid cooking sessions when the lockdown is over now that I know your a chef! 👨🍳
You sure will! Planning on recording a lockdown episode to get the ball rolling In the next couple of weeks 👌👍
Love ur work mate😎
Thanks mate really appreciate it!!
I like it
Cool stuff! Thanks for uploading that. Hope you can get to use it soon! Just a quick question, I'm a noob but I'm wondering, all the woodwork inside is held by being the right size or did you bolt it in the trailer?
Hey mate, glad you enjoyed the video!!
So yeah the wood is cut to fit into the support bars on the trailer so it doesn't need to be bolted in and it seems super solid. If u want I can get photos to show you
@@twox4x432 thanks heaps for answering me ;) and: aha! and you don't have any issues with that driving it around? like it doesn't bang or rub against anything? This is kinda what I wanted to do, but I have very little experience on the topic so yours is very valuable at this point :D
yeah bro it fits really tight so can't go anywhere, the weight of the fridge and everything holds it down with a good amount of weight aswell so yeah it sits in really good, you could always add some silicone or screws if you were worried but mine isn't gonna go anywhere 👌👍
@@twox4x432 cheers for answering ;)
No worries mate thanks for watching!!
Any current videos .. have u done any more to Ur trailer
Nothing atm moment mate, been really busy at work and then when I do get some time off the weather has been terrible, but I do have plenty planned!!
@@twox4x432 OK sweet as