HD Buckets Could be a Game Changer in Plant Hire. Chronicles Ch

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ธ.ค. 2024

ความคิดเห็น • 165

  • @flatbrokefrank6482
    @flatbrokefrank6482 ปีที่แล้ว +16

    The director earned his money on this one - great production!

    • @welderfabber
      @welderfabber  ปีที่แล้ว +2

      He really did getting 2 out in a busy week.

  • @mattylindsayblackburn1877
    @mattylindsayblackburn1877 ปีที่แล้ว +4

    As an English man now living in Australia. I'm glad you have found Curtis.

  • @keithrogers2107
    @keithrogers2107 ปีที่แล้ว +10

    Nice to see John passing his knowledge on to the young ones, better than text books !!

  • @jimsvideos7201
    @jimsvideos7201 ปีที่แล้ว +2

    Props to the Director for the music; he has a knack. These new buckets look like a case of buy once, cry once if they'll save you time working on them.

  • @warwickgb
    @warwickgb ปีที่แล้ว +1

    Brilliant video Baz! You won’t regret the Strickland Ditcher!!

  • @mingthemerciless6855
    @mingthemerciless6855 ปีที่แล้ว +2

    Baz, another great video about the crusher and buckets. Thanks for inviting us into your home. Looking forward to more video's. Cheers.

  • @miketaylor8777
    @miketaylor8777 ปีที่แล้ว +2

    Once again an excellent chapter gents. Always great to have a top man like John to have on speed dial to get the inside knowledge on how to maintain that cone crusher.

  • @gebsep66
    @gebsep66 ปีที่แล้ว +5

    Really like the way you are willing to learn from others ,and also teaching the younger guys to do the same . Great video Baz and Director

    • @welderfabber
      @welderfabber  ปีที่แล้ว +1

      John is a dying breed half the reason I make these vids is to pass on the info

    • @leighpaterson5969
      @leighpaterson5969 ปีที่แล้ว

      Learnt a lot years ago working with John. He showed the other lads up when he started there!! Cracking bloke.

  • @teeslunk
    @teeslunk ปีที่แล้ว +1

    58:10 yeah that bucket is done. ❤❤

  • @silverback123
    @silverback123 ปีที่แล้ว +1

    Top stuff as always👍 was wearing one of your hats the other day when i went to pick my volly up from thompsons comercial at rainton and one of the lads recognised the logo and said how much he enjoyed your videos as well! Keep up the good work💪

  • @Smokey1970
    @Smokey1970 ปีที่แล้ว +4

    Good call on the Strickland Baz! The zero swing machines loose a little bit of balance at full reach when filled with heavy material due to the thicker gauge but that’s a small price to pay for the longevity you will gain.
    I’m sure with your buying power they could brand and number the buckets before paint for you.

  • @hornetboy3694
    @hornetboy3694 ปีที่แล้ว

    Awesome video, thank you, Baz and Mr director you done a great job

  • @philmulrooney7020
    @philmulrooney7020 ปีที่แล้ว +2

    The Director is morphing into a great Editor too👍

  • @garrybeard7718
    @garrybeard7718 ปีที่แล้ว +2

    The best hour on this Saturday morning well done WF...stay safe bud...👍👍👍👍

  • @seagullsbtn
    @seagullsbtn ปีที่แล้ว

    Great shout out to Kurtis at cutting edge engineering. A fantastic you tube channel

  • @biryaniofbodyhair
    @biryaniofbodyhair ปีที่แล้ว +16

    When I started on sites at 14 an old boy said to me "don't ever forget every man operating a digger thinks he's considerably better than he actually is" ! ... He meant it in a safety sense but I guess it applies to correct use also...great episode again lad 👍

    • @tomasdevine7756
      @tomasdevine7756 ปีที่แล้ว +1

      An owner operator is completely different to someone doing it as a job. Brother runs machines but nobody is allowed drive em lol.

  • @cengizsoker1195
    @cengizsoker1195 ปีที่แล้ว

    Mr Baz.I watched the video from start to finish.Thank you for sharing the video with us.Hello to you from Cyprus 👋👋👋

  • @guygfm4243
    @guygfm4243 ปีที่แล้ว +1

    Fascinating stuff , keep on recording all this sort of stuff. Thanks Baz

    • @welderfabber
      @welderfabber  ปีที่แล้ว

      we will try to do as much as we can

  • @paulnolan1352
    @paulnolan1352 ปีที่แล้ว +1

    Cheers Baz and Director, some good shots there of the sort of jobs encountered in the Plant game. The Robotrac always had cracking problems even on the model before yours with the 1013 Deutz Diesel, in fact, I’m surprised the Screen Box mountings where the Springs go wasn’t broken off. On the Cones as you probably now know you have to fit the right Mantle etc to deal with the type of material being crushed. Jaws are less maintenance and Rotary and Impacters etc are a whole other matter. See you on the next one.

  • @scottsand2317
    @scottsand2317 ปีที่แล้ว

    Good work Baz!! Glad you got the cone crusher all figured out and got someone who can point you in the correct direction. That old boy knew his stuff and I’d say you’re in good hands

    • @welderfabber
      @welderfabber  ปีที่แล้ว +1

      No1 is ever to old to learn and those that think they are......well you know.

    • @scottsand2317
      @scottsand2317 ปีที่แล้ว

      @@welderfabber I own a Finley I120 impactor over in South Dakota USA and have owned and worked on cones and jaws over the years so yes I do know!! I sure enjoy watching you guys the struggle is always real, keep up the good work

  • @richmiller7834
    @richmiller7834 ปีที่แล้ว

    A great entertaining channel Baz and the Director. I used to deliver concessionary coal to coal miners on a flat bed lorry, loading 8 tons at a time. Sometimes having to fill the bags with a shovel and loading and delivering 2 or sometimes 3 loads a day. No work, no pay, so out in all weathers. I had my own wagon that needed servicing and repairing at weekends, so not much free time, It was hard work and winters were longer and colder 30 or more years ago. Them days are long gone and nowadays I'm happy to sit here in my armchair with a cup of tea and a hot-water bottle, watching you and your lads enjoying the fresh air up there in Yorkshire...😁😁

    • @welderfabber
      @welderfabber  ปีที่แล้ว

      We got it easy compared to old days mate. Feet up 👍

  • @andyclark1426
    @andyclark1426 ปีที่แล้ว

    Kept busy with all thon buckets there our Baz

  • @martyn2141
    @martyn2141 ปีที่แล้ว

    Great video. Look forward to them every time you produce one. Thanks for the great content.

  • @leshall4285
    @leshall4285 ปีที่แล้ว

    Another brilliant episode, showing the work that goes into repairing the cone crusher

  • @jasoncousins1343
    @jasoncousins1343 11 หลายเดือนก่อน

    Your work load is insaine i can't imagine all the stuff always breaking or plum wore out

  • @alangodfrey6592
    @alangodfrey6592 ปีที่แล้ว

    Top video Baz and Director keep them coming 👍 👌 👏

  • @godfreyiga2013
    @godfreyiga2013 ปีที่แล้ว +1

    Much respect to you guys,tremendous amount of work and skills 🙏

  • @RS.8184
    @RS.8184 ปีที่แล้ว +1

    Before I subbed to your channel, I had no idea about these buckets let alone the work that goes into creating one. Watching you I have learned a few things about these buckets merely by subscribing to your channel. I have mentioned this before I have a natural passion in the work you do, my old man was a welder. I followed a career in computer programming, however I live my passion through channels like yours. Truly enjoy learning through your channel. Top lad.

  • @jamesward5721
    @jamesward5721 ปีที่แล้ว

    Used run Kemppi's migs back when I was doing heavy stuff - brilliant bits of kit & always were, Baz.

  • @Petertb96
    @Petertb96 ปีที่แล้ว

    At least the lads put their hats on for your arrival Baz. Great video!

  • @kempy666999
    @kempy666999 ปีที่แล้ว +1

    Great vid - thanks 👍
    It will be interesting to see if Strickland makes it to your "bucket list" 🤣

  • @Eavis_excavations
    @Eavis_excavations ปีที่แล้ว

    Great video Baz plenty of content be interesting to see how the Strickland bucket stands the test of time 👨🏻‍🏭👍🏼

  • @Note_Creator
    @Note_Creator ปีที่แล้ว +1

    Why was the cone crusher cut with a torch? What was the purpose, the head unthreads.

  • @adrianshjadesheehan9991
    @adrianshjadesheehan9991 ปีที่แล้ว

    Brillant your videos are getting better and better your work and the way you talk through it is second to none fair play baz

  • @GrahamWP58
    @GrahamWP58 ปีที่แล้ว +1

    Two episodes in one weekend great. School day with you and the boys on the cone crusher Baz. Great content as usual and let’s crack on to the next one

  • @ypaulbrown
    @ypaulbrown ปีที่แล้ว

    Great intro Director.....BAZ, you are looking marvelous today....cheers from Wet Florida, had 15 inches of rain yesterday.....Paul

  • @hb_chippy7166
    @hb_chippy7166 ปีที่แล้ว

    A fantastic chapter Baz and Director 👍 👏👏👏

  • @grege7883
    @grege7883 ปีที่แล้ว

    Another brilliant episode fellas thanks so much

  • @95thousandroses
    @95thousandroses ปีที่แล้ว +1

    great episode. can't believe this channel doesn't have atleast 100k subs.

    • @welderfabber
      @welderfabber  ปีที่แล้ว +1

      We are new, but like and share we may get there thanks for watching.

  • @alanhemsley6378
    @alanhemsley6378 ปีที่แล้ว +1

    Great episode baz I’m loving the content keep it coming ❤

  • @nickking4439
    @nickking4439 ปีที่แล้ว

    Another good one baz looking forward to tomorrow morning pal👍👍👍

  • @martinknight510
    @martinknight510 ปีที่แล้ว

    Just had one of the buckets delivered this week for a 8 ton cat seems a good bucket so far

  • @jayusher576
    @jayusher576 ปีที่แล้ว

    Phasing in the HD buckets an Phasing out the economically less feasible to repair ones is an excellent idea

  • @suresren
    @suresren ปีที่แล้ว +1

    Hi Baz. Another great video, thanks, You where talking about wear on the cone crusher, I work in a quarry in Norfolk where the stone is very hard, it's a flint type of stone, we have had one of those crushers on hire in the past, we where having the cone changed every 6 to 10 days due to the hardness of the stone, crushing roughly 1100 ton per day crushing about 40mm size stone,

    • @welderfabber
      @welderfabber  ปีที่แล้ว +1

      wow

    • @scottsand2317
      @scottsand2317 ปีที่แล้ว

      Flint is very abrasive!! Even more so than quartzite or granite here in Sioux Falls SD we used quartzite in our concrete and asphalt and we change liners in about the same timeframe! Some bigger companies actually have two cones on site so they can replace the liner in while the other stays crushing…. Up time is everything in this business

  • @ShalomBrother
    @ShalomBrother ปีที่แล้ว +2

    46:04 gloves are for girls 🤜🏼💪🏼

  • @jamiewall9076
    @jamiewall9076 ปีที่แล้ว

    Another great video by the tge way, ariel footage was brilliant

  • @andytg107
    @andytg107 ปีที่แล้ว

    Thanks for the effort you are putting in making these videos! Ive been watching since the ashville bucket

  • @abuubaydullah1
    @abuubaydullah1 ปีที่แล้ว

    Yet once again learned quite a lot never to old to learn, as always Baz an Director excellent video as being more or housebound these days the videos get me out and about by watching them thanks as always guy keep umm coming .

  • @65Lynchy
    @65Lynchy ปีที่แล้ว

    Shap granite change the pegson cone n mantle every four weeks,turn jaws on two kue Jen's every two weeks ,change every four,got quick at them but still had bit grief now n again,
    Great video as usual 👍

  • @garlenseong38
    @garlenseong38 8 หลายเดือนก่อน

    Keep up the good work...

  • @davehillier4827
    @davehillier4827 ปีที่แล้ว

    Great work guys me personally I'd fully repair that digging bucket get more longevity out of it

    • @welderfabber
      @welderfabber  ปีที่แล้ว

      There are so many, its all about keeping them going, we may haft to employ a full time bucket builder.

  • @forumbezoeker
    @forumbezoeker ปีที่แล้ว

    nice digging bucket. would just ask the manufacturer if he can countersink the holes in the mother blade. especially in demolition work that we are involved in, the nuts stay intact longer.

  • @martincraig-je4vo
    @martincraig-je4vo ปีที่แล้ว

    Brilliant as always 👍👍

  • @simonjones7785
    @simonjones7785 10 หลายเดือนก่อน

    for those who have not worked with steel to roll a curve into a 15 mm steel plate is no mean feat it takes an impressive set of rollers to make it into a curve

  • @fredrickugarner8278
    @fredrickugarner8278 ปีที่แล้ว

    Everyday is a learning experience learn from the best that is time that is never wasted

  • @MrE30
    @MrE30 ปีที่แล้ว

    Cracking episode Baz and Director

  • @sheepdawg369
    @sheepdawg369 ปีที่แล้ว

    Top graft lads 👌🏻🇮🇲 another great watch bn looking forward to you director and lads do that cone crusher also John was good to listen explain what he was doing
    Top job n @welderfabber director n lads and John 💪🏻👌🏻🇮🇲
    🦊 Running wild over here now 😂🇮🇲🦊

  • @seagullsbtn
    @seagullsbtn ปีที่แล้ว +1

    A small design difference that is brilliant for longevity and strength is the round top bar on the Strickland. No better way to spread the load.

  • @codybracher1636
    @codybracher1636 ปีที่แล้ว

    That ZX250 GP Bucket is fine

  • @geraldestes2470
    @geraldestes2470 ปีที่แล้ว

    > CEE is one of my favs also; kurtis is going thru that franna yard crane with a fine tooth comb - capitol equipment investment. very similar in scope to WF maintenance... @ what point does the repair supercede a practical business expense. nice crib there baz.

  • @philmulrooney7020
    @philmulrooney7020 ปีที่แล้ว

    Strickland build a great bucket.

  • @fredrickugarner8278
    @fredrickugarner8278 ปีที่แล้ว

    Baz that is why you are the best

  • @disco0314
    @disco0314 ปีที่แล้ว

    Epic chapter of the chronicles. It's brilliant to see how the engineering side of these crushes are done. Is there any chance you doing an explanation on how people can go about getting into there digger licences please Baz. Well done to all lad involved. 🙌

    • @welderfabber
      @welderfabber  ปีที่แล้ว +1

      maybe bud, but its not what I do

    • @disco0314
      @disco0314 ปีที่แล้ว +1

      @@welderfabber it be much appreciated baz just for in future anyone wanting to get into the quarry game and wanting to be a digger driver or machine operator. Thank you for taking your time to read and comment 🙌

  • @203MPH
    @203MPH ปีที่แล้ว

    I was just wondering, How many miles/km of welding wire do you use a week?

  • @clark5551
    @clark5551 ปีที่แล้ว

    How do you get on with running the tacho in the van? ESP with all the other work and out of scope driving on site. How do you get round the out of hours emergency call outs with the driving regs? Being out til 2am and then back in yard at 6 just doesn’t work.

    • @welderfabber
      @welderfabber  ปีที่แล้ว

      The rules on tacho are different to wagons mate on a 5 tonne van

    • @clark5551
      @clark5551 ปีที่แล้ว

      @@welderfabber not so sure about that, we had to run a tacho in our little vivaro as with trailer on it went over 3500kg and into eu driving regs. Anyway, loving the channel, came over from Ashville. Mechanic to trade; just light vehicle stuff. Wish I could weld. Love the work ethic you and the lads have. Varied and interesting work. 👍.

  • @markneathway5629
    @markneathway5629 ปีที่แล้ว

    To stop the leaves coming in your workshop I'd get a tennis net stretched across the front on a frame resting on the floor with a door section maybe a fruit net over the tennis net to catch the fines the little leaves

    • @welderfabber
      @welderfabber  ปีที่แล้ว

      ha I got 5 lads that can use a brush

  • @stephenpearson3153
    @stephenpearson3153 ปีที่แล้ว

    Gotta love Karen Curtis and homeless. Lol. The director is doing great job should rename him “Ridley” as in Scott. Lol

  • @jayd1974
    @jayd1974 ปีที่แล้ว

    Good stuff lads👍

  • @RichardArblaster
    @RichardArblaster ปีที่แล้ว

    Great episode 😎

  • @JonDingle
    @JonDingle ปีที่แล้ว

    Awesome video again!

  • @paulbarrett1834
    @paulbarrett1834 ปีที่แล้ว

    Great tips I worked with a terex 1000 SR cone crusher that wos a bitch when it had a new cone fitted

  • @jcon416
    @jcon416 ปีที่แล้ว

    CEE videos on Friday and welder fabber videos on Saturday/Sunday . Brilliant content

    • @scottsand2317
      @scottsand2317 ปีที่แล้ว

      I agree!! Curtis is very good at his job

  • @andrewcoverdale6000
    @andrewcoverdale6000 ปีที่แล้ว

    I wish the cone crusher that I operated where that easy to change

  • @jonty4664
    @jonty4664 ปีที่แล้ว

    Proper a job as always ☕️

  • @woodturnermark8529
    @woodturnermark8529 10 หลายเดือนก่อน

    Baz, it's never the operators fault, just ask them ! They never claim to know what happened, the damage was there when they got on the machine at the start of their shift.

  • @Stillgotallmyfingers
    @Stillgotallmyfingers ปีที่แล้ว

    Great video Baz 🤙

    • @welderfabber
      @welderfabber  ปีที่แล้ว +1

      you like tomorrows more...

  • @gaslight5
    @gaslight5 ปีที่แล้ว +5

    The problem is the operators, or lack of actual operators.

    • @paulf2529
      @paulf2529 ปีที่แล้ว +2

      A lot will keep going rather than spend at most a few minutes tracking over and changing to a smaller bucket were the breakout force is more concentrated .
      Trouble is a 13 ton or bigger machine will still work a oversized bucket in most materials but the forces exerted destroy them.

  • @Blackopsmechanic338
    @Blackopsmechanic338 ปีที่แล้ว

    Great job! Be safe. Peace

  • @ashboy225
    @ashboy225 ปีที่แล้ว

    When they are out out on hire those buckets, they are used to dig hard ground when a digging bucket should be used. They are more designed for grading work, soft pile digging or in your case scrapping the ground. So really it will last a lot longer if all you are doing is scrapping a road. The real test for it would be out on hire, where everything gets abused by operators who don't care. Does drive you nuts having operators who don't care

    • @welderfabber
      @welderfabber  ปีที่แล้ว

      Up at bacup it will be used all over shifting muck scraping roads helping dozer after tip etc

  • @haydenc2742
    @haydenc2742 ปีที่แล้ว

    Could your build boys add stiffners on the back of the buckets? it seems the design of using a round tube at the top rather than the flat plate might be stronger as it should be more rigid in the back, instead of flexing the pipe is much more rigid as it disperses the twisting energy along it's length
    Very cool! Keep em coming!!!!

    • @haydenc2742
      @haydenc2742 ปีที่แล้ว

      Do they sell 5 gallon bucket paint shakers...might be able to mix up that bucket if it's put in one of them for 10 minutes...might save having to buy new every time...

  • @brownwarrior6867
    @brownwarrior6867 10 หลายเดือนก่อน

    The panoramic views on this video had me thinking you should perhaps dub the Director Riddler Scott given the general plant based subject matter Baz 😉
    Smashed it again 🤜🏼⚡️🤛🏼
    Ps yer awfy critical of us Plant Ops Baz
    We used to have an acronym in the Royal Engineers that would turn up on pieces of equipment allover the Corps:
    E.R.F.P.O
    Equal Rights For Plant Ops
    So if you’ve ever picked up som ex MOD equipment and seen that tag ( dials on Rev counter or Speedo we’re always a favourite) now you know some pissed off Sapper got busy with a pen /marker or welder 😉👍🏼

  • @sicknote26
    @sicknote26 ปีที่แล้ว

    Am goin to give my time to few days to help u play catch up

  • @MrBugi0
    @MrBugi0 ปีที่แล้ว

    Ace as always 👍🏻👍🏻👍🏻

  • @WILLYBOY7719
    @WILLYBOY7719 ปีที่แล้ว

    Happen baz lad how did the director? Get that drone shot at bay cup with the new bucket on ur Trl was he not driving the pickup or was he in the van good filming there 🍾🎉🍾💪

    • @welderfabber
      @welderfabber  ปีที่แล้ว +1

      sat in the van controlling it

    • @WILLYBOY7719
      @WILLYBOY7719 ปีที่แล้ว

      @@welderfabber I thought that well done champ keep it coming 🤙🤙

  • @martinboyce9684
    @martinboyce9684 ปีที่แล้ว

    New HILL rock bucket is 10500pounds plus vat

  • @jamiewall9076
    @jamiewall9076 ปีที่แล้ว +1

    Not awelder so forgive me,the cone once cut was still on fire when being worked on.1 what was burning as it's metal, 2 safety wise shouldn't it be out out? Not a softie southerner question just unsure!

    • @pyromaniac354
      @pyromaniac354 ปีที่แล้ว +1

      I thought grease or something similar

    • @welderfabber
      @welderfabber  ปีที่แล้ว

      yeah grease waste its not a issue

    • @scottsand2317
      @scottsand2317 ปีที่แล้ว

      Usually it’s the backing that they poured into the mantle and concave when you burn the flame ring out it burns that stuff a little

  • @pljones75
    @pljones75 ปีที่แล้ว

    Why would you use a cone crusher over a regular one??? And what does that liquid do ?

    • @welderfabber
      @welderfabber  ปีที่แล้ว

      its liquid metal I'm new to cones jaws are better for rough stuff

    • @scottsand2317
      @scottsand2317 ปีที่แล้ว

      Cones are a secondary crusher they can actually make sand out of rock a jaw can not get that small

  • @kevinthompson5827
    @kevinthompson5827 ปีที่แล้ว

    I’m new to this channel and I’m curious of what you guys do? Road construction and recycling?

    • @welderfabber
      @welderfabber  ปีที่แล้ว +1

      Everything look up fox group uk 15 companys.

  • @patrickjordan7670
    @patrickjordan7670 ปีที่แล้ว

    Looking at some of them buckets you can tell it's bad opperaters we call them keyboard opperaters and they do most of there driving in the pub they don't give a shit when they're not paying for it I'm glad you Hooke up with Curtis from cc engineering I think he's top class I've been watching him for a while I see you already know about a engineering company in northern Ireland we've got some good engineering companies here in southern Ireland aswell I'm only 10 miles from Dromone engineering they make quick hitches I used to use Stricland buckets when I lived in Birmingham 35 years ago excavators have become a lot more powerful since then anyway great videos keep them coming great 👍👍

  • @ralphwhittington989
    @ralphwhittington989 ปีที่แล้ว

    Great episode just to see the work u do and some of the damage that gets done to the buckets well can't wait to Sunday for next episode keep up the great work

  • @ruthbees7214
    @ruthbees7214 ปีที่แล้ว

    A lot of buckets get broken because of abuse. I used to see machine drivers smack the ditching bucket on the road to get clay out of the bucket to lazy to get out of the machine and get a shovel and dig it out. In thirty years going on sites i have seen good bad and ugly machine drivers.😂❤

  • @MrPlumberguy23
    @MrPlumberguy23 ปีที่แล้ว

    cee he got that engine took apart

  • @markmawson1
    @markmawson1 ปีที่แล้ว

    Love the videos

  • @rossnolan2883
    @rossnolan2883 ปีที่แล้ว

    Awesome 😎

  • @adammulcahy644
    @adammulcahy644 ปีที่แล้ว

    Just wondering why he made the cut around the cone it didn’t really do anything

  • @HostileMike
    @HostileMike ปีที่แล้ว

    USA loves Fabber

  • @paulusmarc
    @paulusmarc ปีที่แล้ว

    Bon Boulo😆😆👍👍

  • @2xKTfc
    @2xKTfc ปีที่แล้ว

    Methinks your company charges the customers too little for a damaged bucket. Of course buckets wear out, but if they have an incentive to hire the right bucket for the job and train their operators to use them right they ought to not look like they were used in a quarry for years after every job..

  • @ryandale3819
    @ryandale3819 ปีที่แล้ว

    Alright baz I been watching the videos for a while and you have inspired me to start welding just wondering if you give me a shot out on the next video

    • @welderfabber
      @welderfabber  ปีที่แล้ว

      shot out? Just keep going post some vids maybe I'll shout u out.

  • @StephenSyddall-z4u
    @StephenSyddall-z4u ปีที่แล้ว +1

    Baz I had a old timer teach me on Leyland boxers, Bedford Tk and such a shame now everything is laptop and programming. AI robots won't be able to do what we do and think out the box