So I got the same exact remote start as u but none of my clips are 3x3. I can't find where it goes. How would I wire it in. I got a 2015 taotao 200cc atv
Purchased wiring harness from Amazon. I want to add remote start/stop to my sons atv but there is no plug for the remote box. Any help would be appreciated.
I have an 06 honda trx250te a and I've searched for a wiring harness for days. I've read somewhere that this model requires a "Japanese wiring harness". All the kits have the wrong left hand start/stop lights switch. Is there really a difference in the wiring/connections between the specified Chinese/Japanese harnesses?
I bought the terminator 110cc atv and I'm having a problem with the key ignition wire burning and I trying to figure out what is causing it to do. I have replaced the key ignition about a month ago and my sons was riding it and it burnt the wire again. What you think is causing it to do that?
Kind of hard to say, a few things come to mind such as cranking the starter for too long can put heat on that line, putting in a battery with too high amperage could heat the line, problem with voltage regulator, etc. Not sure if the wire is shorting something out somewhere and causing a draw or just resting against something hot like exhaust. Possibly one of those thoughts can get you somewhere to start. Regulators are cheap, same with batteries and cleaning carb if not starting right away.
the kit is no longer available in the exact location I got it from. The search "Chinese ATV wiring harness" returns similar results. Also, GY6 wiring kit should work.
Hey Buddy, I have a 125cc Chinese ATV however, i had the 10A fuse being blown a few times when i hit the brake prior to starting. I am thinking to change the whole wiring harness. what kind do i need to order if i have Forward, Neutral & Reverse with GY6, front brakes & rear. Please advise Thank you again for all the videos you do. they help allot!
Unless you have a gear indicator setup, the gears may not have anything to do with the wiring harness you could be looking for. There is a GY6 harness but you need to know which stator type you have before ordering. That said, do you have any brand labeling on the VIN plate?
Also, most times I dealt with a fuse on boat engines, cleaning the terminal that connects to the battery, putting an electrical grease (nothing flammable) to prevent corrosion on the node, and changing the fuse inside, typically resolved the issue. There is a battery terminal and protector grease that's pretty cheap, before re wiring every thing. Once you get to replacing voltage regulator, sometimes having the whole kit since it's cheap and the easiest option if there is anything else going on.
I noticed that the colors of the wires at the connectors don’t match up. Mine is the same way, did you change yours to make it work. You didn’t mention it in the video. On the connector for the handle bar switch I have yellow going green and blue going to black, etc, etc. I would think blue went to blue and green to green, etc etc.
Hey mate any chance you could do a video showing how to join a remote kill switch to an old wiring loom off a 14 yr old 110cc Chinese atv. It came with instructions but doesn't make sense
@@megoingfast Fair enough mate the instructions they send don't make any sense to me and the sellers response was I needed an entire new wiring harness
Hi bro, i got pretty much the same kit. My key ignition switch doesn’t kill the engine, it does turn on and off the battery (circuit) tho. Do you have any idea on what might have gone wrong?
Hey can anyone help i just connect all the wiring in my 150cc but everytime I connect the battery on the positive side the atv cranks with the switch off
Good basics on what's in a cheap Chinese ATV wiring harness!
hi, nice video, has exactly the same problem, how do you find out where the wires from the six koil stator should be plugged
So I got the same exact remote start as u but none of my clips are 3x3. I can't find where it goes. How would I wire it in. I got a 2015 taotao 200cc atv
What good does remote start do if you stil have to turn the key?
Purchased wiring harness from Amazon. I want to add remote start/stop to my sons atv but there is no plug for the remote box. Any help would be appreciated.
Can I plug this in to a six coil stater wiring harness
Can u put a link to the wire harness
I have an 06 honda trx250te a and I've searched for a wiring harness for days. I've read somewhere that this model requires a "Japanese wiring harness". All the kits have the wrong left hand start/stop lights switch. Is there really a difference in the wiring/connections between the specified Chinese/Japanese harnesses?
I bought the terminator 110cc atv and I'm having a problem with the key ignition wire burning and I trying to figure out what is causing it to do. I have replaced the key ignition about a month ago and my sons was riding it and it burnt the wire again. What you think is causing it to do that?
Kind of hard to say, a few things come to mind such as cranking the starter for too long can put heat on that line, putting in a battery with too high amperage could heat the line, problem with voltage regulator, etc. Not sure if the wire is shorting something out somewhere and causing a draw or just resting against something hot like exhaust. Possibly one of those thoughts can get you somewhere to start. Regulators are cheap, same with batteries and cleaning carb if not starting right away.
Hey, do you think you can post a link to this kit? Please and thanks!
the kit is no longer available in the exact location I got it from. The search "Chinese ATV wiring harness" returns similar results. Also, GY6 wiring kit should work.
I got same one can't start with new remote.
Hey Buddy, I have a 125cc Chinese ATV however, i had the 10A fuse being blown a few times when i hit the brake prior to starting. I am thinking to change the whole wiring harness. what kind do i need to order if i have Forward, Neutral & Reverse with GY6, front brakes & rear. Please advise Thank you again for all the videos you do. they help allot!
Unless you have a gear indicator setup, the gears may not have anything to do with the wiring harness you could be looking for. There is a GY6 harness but you need to know which stator type you have before ordering. That said, do you have any brand labeling on the VIN plate?
Also, most times I dealt with a fuse on boat engines, cleaning the terminal that connects to the battery, putting an electrical grease (nothing flammable) to prevent corrosion on the node, and changing the fuse inside, typically resolved the issue. There is a battery terminal and protector grease that's pretty cheap, before re wiring every thing. Once you get to replacing voltage regulator, sometimes having the whole kit since it's cheap and the easiest option if there is anything else going on.
I noticed that the colors of the wires at the connectors don’t match up. Mine is the same way, did you change yours to make it work. You didn’t mention it in the video. On the connector for the handle bar switch I have yellow going green and blue going to black, etc, etc. I would think blue went to blue and green to green, etc etc.
I did not change mine. The colors do not go to the same colors, it can get confusing.
Hey mate any chance you could do a video showing how to join a remote kill switch to an old wiring loom off a 14 yr old 110cc Chinese atv. It came with instructions but doesn't make sense
Thanks
It was a buddies ATV. If he brings is back by I might dabble. Not doing too much 'visitation' this year, though... world events and such.
@@megoingfast Fair enough mate the instructions they send don't make any sense to me and the sellers response was I needed an entire new wiring harness
so where you get the harness can you drop a link
It was long ago enough they have switched how it's sold and by whom. Was a while back.
Hi bro, i got pretty much the same kit. My key ignition switch doesn’t kill the engine, it does turn on and off the battery (circuit) tho. Do you have any idea on what might have gone wrong?
The color orng wier were go??
Hey can anyone help i just connect all the wiring in my 150cc but everytime I connect the battery on the positive side the atv cranks with the switch off
Is your solenoid shorted out that you can check? Pull off the two smaller wires going into it in case it's stuck on too.
It comes with remote start
Is this just a generic Chinese wiring harness off of eBay? Just wanted to know if they all carry the same connections.
Generic, Amazon. Was the same one I saw on eBay.
me okay, appreciate it.
What if someone vandalized the kids 4wheeler and you just want to hear it run before you buy it
It's only basic until you do t have the starter wire 😂
Need help plz
lol