The fancy turf looks amazing and feels great. I don't have any on my boat because I'm just rough on it. Hogs, fish, and drawing coolers in and out. I feel.as it might get ugly. We will see Quincy will work this boat.
I'm in the market. Lookin at a South fork. Don't like how big the deck is. Can you talk to us a bit more about these boats? Is black river worth the drive from SW AR for a boat? Thanks and love the vids
What does the bottom profile look like? Is the hull design worth the extra money? I can get a South fork with a similar accessory package here locally for about 5k less. Really really like the looks of this boat, but I'd need help to justify it
@bobbycrenshaw5167 my first blazer had a tunnel. On these smaller boats, they just pull the boat down to much and rob speed. You wamt the lift amd ever bit of speed you can get.
I really wanted to buy a jet boat from Black River Boats after watching your videos. I called and emailed them multiple times for months with no response. I have left messages that I have cash in hand and never got a call back. Crickets… I don’t get it. Me and the family really enjoy watching your videos. Keep up the good work.
@Michael i ran into the same issue. Look up west boat shop. They are building me a southfork right now. They are quick to answer and respond and on it.
If a business owner wont return your calls or emails when you are trying to give them your hard earned money for their product, do you really think they will honor their warranty? Think about it. Just my two cents. Again, we always enjoy your videos. Please keep them coming. Thanks.
My map shows Big Creek. Runs into St. Francis River right at Sam A Baker park close to Hwy 143. Locals may have another name for it. St. Francis gets rough after thos point.
Delta vs full flat? Kaz, blazer, or legion? I like Kaz due to the vertical bracing and wouldnt washboard as bad. Does delta float just as shallow as full flat? Top speed compared to other boats?
It kind of varies from boat to boat, but with power trim, it allows you to lift the motor when you’re getting skinny to avoid hitting the bottom along with helping to get on plane with a load in the boat
@HenryMay127 So even when trying to get on plane as in just starting off you would be trimmed up? Also I thought that it was hard on the motor etc to run it not all the way down and that it wears out your power trim ?
@DennisBohannan that helps thank you. So would you run it trimmed up even in just taking off? Does running it full throttle trimmed up not put to much stress on the power trim unit itself ?
I tried to buy a boat from them guys. I live an hour south in arkansas. They won't hardly answer the phone or call back. I have west boat shop putting together a 17x52 southfork tiller with 40 jet. I'll have videos soon. That's a great campground there at old greenville.
@DennisBohannan Hollar next time your up here with your boat. I just got a camera and will be making some videos as well. You need to check out eleven point.
I could watch these videos for ever
Beautiful boat, Love watching you run boats in skinny water!
That's an absolute beauty of a boat! And you couldn't have more fun if you had to. It really makes me miss running rivers up in Alaska!
Man let me tell ya…you got me hooked on these type of videos! Keep em coming!
Really good looking setup.
My backyard. Love running that area and great fishing
The fishing there looked like it be good
5:21 you’re telling me. Haven’t ran that stretch in a while. It’s beautiful! Always wanted to make it to Sam A Baker via Big Creek.
A little trimming you could get there.
I pucker it up tite, watching your show. 😅😅😅
Lol!!!!! I need to take a bath; slept in the truck last night and feeling a little greasy. hahahaha😂😂
I always take soap with me.
"maybe close your eyes" 🤣😂
Luck plays a big part of it.
Let’s hear about that marine mat! Why don’t you have any on yours? Any opinion if it’s worth it???
The fancy turf looks amazing and feels great. I don't have any on my boat because I'm just rough on it. Hogs, fish, and drawing coolers in and out. I feel.as it might get ugly. We will see Quincy will work this boat.
I live in Patterson and was just running my boat right through there today lol small world
What’s this set up going for & where did you pick it up from?
Black river boats Poplar Bluff Missouri
I'm in the market. Lookin at a South fork. Don't like how big the deck is. Can you talk to us a bit more about these boats? Is black river worth the drive from SW AR for a boat? Thanks and love the vids
What does the bottom profile look like? Is the hull design worth the extra money? I can get a South fork with a similar accessory package here locally for about 5k less. Really really like the looks of this boat, but I'd need help to justify it
How shallow was that?
Dennis- love your videos. Question- Your thoughts on a tunnel hull? I see your hulls do not have such. Do you prefer not to have them?
@bobbycrenshaw5167 my first blazer had a tunnel. On these smaller boats, they just pull the boat down to much and rob speed. You wamt the lift amd ever bit of speed you can get.
Inside floor 54"? I'm assuming the bunks on the side are for foam?
Bottom of boat is 54 and correct on foam.
I really wanted to buy a jet boat from Black River Boats after watching your videos. I called and emailed them multiple times for months with no response. I have left messages that I have cash in hand and never got a call back. Crickets… I don’t get it.
Me and the family really enjoy watching your videos. Keep up the good work.
Dang. I hate to hear that. I will share this with them.
@Michael i ran into the same issue. Look up west boat shop. They are building me a southfork right now. They are quick to answer and respond and on it.
Same thing happened to me when I called Kaz Customs..no reply...call back or anything...seems like all the boats he demos can't be bought 😅
If a business owner wont return your calls or emails when you are trying to give them your hard earned money for their product, do you really think they will honor their warranty? Think about it. Just my two cents.
Again, we always enjoy your videos. Please keep them coming. Thanks.
I live in Elsinore and I saw that boat sitting at that shop
Love the channel and content. You’re pretty close to my neck of the woods. Check your map again, i doubt you were in big creek
My map shows Big Creek. Runs into St. Francis River right at Sam A Baker park close to Hwy 143. Locals may have another name for it. St. Francis gets rough after thos point.
Correct, Big creek runs into St Francis at Sam A Baker campground and boat ramp. I didn’t think you made it above 34 bridge. Keep the videos coming
Delta vs full flat? Kaz, blazer, or legion?
I like Kaz due to the vertical bracing and wouldnt washboard as bad. Does delta float just as shallow as full flat? Top speed compared to other boats?
The Legions have long vertical runners as well. Yes just as shallow.
This one ran 34 down stram 2 people.
Man I gotta know how's is that Legion boat holding up ?? I was thinking on ordering one
Brand new. Not sure yet. I'm very confident it going to do great.
How thick is your hull on your Kaz Kustom.
Hell yeah brother
You like this one or the kaz better? What one is faster ?
Hey what do you mean when you talk about the boat has so much trim ?
Dont you always just run with motor all the way down ?
It kind of varies from boat to boat, but with power trim, it allows you to lift the motor when you’re getting skinny to avoid hitting the bottom along with helping to get on plane with a load in the boat
This video may help.
th-cam.com/video/cozf-TdVDiA/w-d-xo.html
I always run trimmed up as high as I can.
@HenryMay127 So even when trying to get on plane as in just starting off you would be trimmed up?
Also I thought that it was hard on the motor etc to run it not all the way down and that it wears out your power trim ?
@DennisBohannan that helps thank you. So would you run it trimmed up even in just taking off? Does running it full throttle trimmed up not put to much stress on the power trim unit itself ?
Where do you get that boat made at and could they do it how you want your boat to be like.
Ya
Black River Boats poplar bluff Missouri
Ok thanks
Como entro em contato com vc? Eu sou do Brasil eu queria fazer um barco desse.
I tried to buy a boat from them guys. I live an hour south in arkansas. They won't hardly answer the phone or call back. I have west boat shop putting together a 17x52 southfork tiller with 40 jet. I'll have videos soon. That's a great campground there at old greenville.
Dang. I hate to hear this. I will show them this comment.
@DennisBohannan Hollar next time your up here with your boat. I just got a camera and will be making some videos as well. You need to check out eleven point.
For sure. Was tempted to go this trip, but it was a little high. Want to hit it when low.
Please tell me what the fuel consumption is?
I can get 100 miles out of 13 gallons if I baby it.
@@DennisBohannan a decent expense.👍
How much would a rig like that cost?
23k
@ricklovelace5344
Info on your rig?
903-574-282three. Text me I get you in contact with him
I got one for sale 18000.00 got 12 hrs on the motor bought it at black river boats
I need that