Tip anyone that stumbles across this video. If you have the stock intake still to make removing the box easier remove the headlight bulb cover. The air box slips right out after
Hey I know this video is old, but I noticed you deleted the air jug and put what looks like a performance air filter where it once was, did that give you a lot of noise over the stock jug set up ?
Yeah it did actually increase the intake noise. I wish I was making TH-cam videos when I did that because it's an interesting and basically free mod other than the cost of a filter.
If I had a SF intake already but installed a new one would I still need to reflash? I just swapped for another SF with a air box and black hose that’s all
i bought my 2013 sti with the stage 2 kit fully installed but im having problems keeping my intake filter clean. does anyone have and recommendations on a fully enclosed intake box? could my fender shrouds be causing it?
@@AdrianMorse42069 I have 2013 WRX with Catback daily driver 45k miles, paid it off 6 months ago and looking to get Intake now and maybe that COBB tune.
Hey i know this was made a while back but how does the tuner work... can i just do the mapping and take it off? Or do i have to have it connected? This is my first mod that i want to do to my 2008 wrx
When you flash a new map, the access port should save a map of your stock tune. You can then reflash the stock map that is saved just like any other map whenever you decide to go back to stock.
Here me out. It's videos like this that pisses me off for not being prepared and following through blindly. I made my own box, cause I couldn't get one cheap enough. It worked out, but took WAAAAY longer than it should have, if I could've visualized the dimensions of the box. Cobb's instructions aren't as helpful, because they're broad. In hindsight, this video would've been a lifesaver. So if there's a lesson to be learned, do you're homework first.
I really appreciate your choice of music. So many other car channels feature stuff that sounds like Alvin and the Chipmunks branched out into dubstep.
Tip anyone that stumbles across this video. If you have the stock intake still to make removing the box easier remove the headlight bulb cover. The air box slips right out after
Way better instructions than what was on cobb’s site. Thanks!
Hey man, thanks for the walkthrough. I just added my Cobb intake and followed this step by step and it was a snap. Much appreciated!
great choice of music dude. Great video!
instablaster.
Man this video is helpful. Very clear and easy to see and follow. 10/10
Nice vid and a cool background tune!
Great vid, one suggestion tho: speak clearly and louder, could not really hear you over the music. Other than that, great walkthrough, helped a lot
I know the audio was bad. I didn't have an external mic when I made this and there was so much white noise.
I’m Canada we don’t use ACN, it stands for Arizona, California and Nevada
I'm in Canada as well and the ACN tune is what's recommended for Canadian fuel, because it is so terrible. Unless you're in AB. Might be a bit better?
Quality video my guy, thank you!
Hey I know this video is old, but I noticed you deleted the air jug and put what looks like a performance air filter where it once was, did that give you a lot of noise over the stock jug set up ?
Yeah it did actually increase the intake noise. I wish I was making TH-cam videos when I did that because it's an interesting and basically free mod other than the cost of a filter.
Adrian Morse thanks man. I’ve been looking to get more induction noise without going full intake. What filter did you use on the bottom?
It was this filter here if I remember correctly www.edelbrock.com/pro-flo-universal-red-medium-conical-air-filter-with-3-3-5-and-4-inlet-43641.html
Great Video! Thank you
Quico question do you need the access port of you get the cold air intake system??
It's highly recommended
thank you!
So if you don't have cobb access port you can't run this intake
You probably can but it's advised you run the proper tune
If I had a SF intake already but installed a new one would I still need to reflash? I just swapped for another SF with a air box and black hose that’s all
No I don't think you'd need to
@@AdrianMorse42069 Thank you i appreciate it
i bought my 2013 sti with the stage 2 kit fully installed but im having problems keeping my intake filter clean. does anyone have and recommendations on a fully enclosed intake box? could my fender shrouds be causing it?
I don't think there are many aftermarket sealed boxes. OEM with a good filter might be your only option
Nice install..but clean your engine please!
Disconnecting the negative terminal for an intake 😂
Did you throw any codes putting the air flow sensor on the new Cobb? That's my only worry.
There were no codes. You could run it without using the Cobb flash tune, but it is recommended that you do use it.
@@AdrianMorse42069 I have 2013 WRX with Catback daily driver 45k miles, paid it off 6 months ago and looking to get Intake now and maybe that COBB tune.
@@mobius6772 Trust me the intake/airbox combo along with the cobb is the best thing you can do! The intake brings out the turbo noises like crazy!
I know this video is quite old but any chance you have the link to this intake? Thanks
www.cobbtuning.com/products/subaru-sf-intake-airbox
Thanks mate 👌
Do you need an access port for this?
Yes, it is recommended that you have an access port for this mod
Hey i know this was made a while back but how does the tuner work... can i just do the mapping and take it off? Or do i have to have it connected? This is my first mod that i want to do to my 2008 wrx
You can either load your desired map and unplug the access port, or leave it plugged in to monitor your engine in real time.
Can I reflash the Cobb access port back to factory ecu if I choose to? With factory parts of course..
When you flash a new map, the access port should save a map of your stock tune. You can then reflash the stock map that is saved just like any other map whenever you decide to go back to stock.
How do I get ride of the boost cut? Use a different tune?
A tune and/or a 3 port boost control solenoid might solve your problem
@@AdrianMorse42069 do you know if I can throw a sti intake manifold into a wrx? I have a 2008 wrx hatch
I'm not too sure about that one.
What if im in colorado what map do i choose
You would choose the non ACN map
Ben Birchman oh fr? I don’t remember asking you
When ups bends your airbox so it ends up taking you 6 hours to install this 😭
Yikes!
Here me out. It's videos like this that pisses me off for not being prepared and following through blindly.
I made my own box, cause I couldn't get one cheap enough. It worked out, but took WAAAAY longer than it should have, if I could've visualized the dimensions of the box. Cobb's instructions aren't as helpful, because they're broad.
In hindsight, this video would've been a lifesaver. So if there's a lesson to be learned, do you're homework first.
snorkis😂
Your car is dirty
This time we gonna get funky