Keep on doing videos man! European airsoft lovers need you all across the continent! TH-camrs talk too generally about airsoft, you on the contrary give numbers, examples, detailed descriptions of mechanical gear. Thats fundamental! Pleas do not give up!
Great vid! i am glad i stumbled onto your channel. We have 1 to 1 similar views and understanding of the science of airsoft. I personally like to use the ML HotShot buckings and i am interested in you testing these for yourself. HotShot buckings allow use of GBB barrels in AEGs and i personally see a huge improvement in airseal and FPS consistency and range. would like to see you test the new silicone ColdShot buckings as ML calls them now.
Amazing work you put in! Can wait for the shooting tests! Can you make a video on kwa hop up? Or what can you recoment for the stock kwa hop up really hard to find whats the best bucking
hi, mechanical engineer here :) let me start by saying that I love your scientific approach to things. I also read that you have health issues, it sucks....and i hope you will recover soon. I don't know if you'll ever come back, but in case i would love a video about rifled inner barrels ; i know that the dynamics of an airsoft projectile is different compared to a normal projectile, but my question is : a round bb under the magnus effect is more stable than a classic projectile spinning? what if a plastic bb with the shape of a classic projectile(the ones with the rounded head) and a rifled inner barrel is used?
it would have superrior accuracy but low range because nothing would lift the BB up. Remember we shoot with around 2J when normal weapons have like thousands of J.
I had two lambda barrels and really hate them because of how sharp the window is. Actually I lost 3 buckings by those. Much better choice in my opinion i Da-Vinci Airsoft. I have also heard that Da-Vinci is on pair with PDI. Compating both, the quality is actually the same, but Da-Vinci has longer window. It's still a little too sharp but do not cut the bucking. Waiting for your shooting test :)
do you prefer five or one, what are the advantages of one over the other, especially for hpa. and compare to the prometheus canon you mentioned, which one do you prefer? And I ve seen a new pdi barrel of 6.15mm, i didn't find any information or opinion, if you've got one, i want it ! And awesome work btw!
I would say that microns does not exist LoL, i don't believe something that i can not measure. For me, 0.01mm is the lowest reliable value (in the best case). Gud vid.
I like to hold a finger on the opposite end of the barrel and push the bucking by the nozzle lips with my thumb so it balloons itself over the barrel rather than stretch over
Ur right, im working in the metal industry, I am a welder and fabricator as well, Every metal ( alloy and stainless steel even more) deforms by temperature, I think a simple steel tube expand more than a 0.0001milimeter if you go back to your warm room from a +5 degree celcius outside. Total bullshit.
if you take the equation in stainless steel l1 = l0(1+a(t1-t0) and a a of CrNi 80 20 (a=15,5x10^-6) you get a expansion of the inner diameter by 0,00047mm by just switching for 20 to 25 degree C. This means a 6.0500 barrel at 20C is 6.0505 at 25C... so yes, 0,0001 tolarance is just impossible. Even 0,001 will vary if the temperature changes by 10 degree, lets say inside the hall it has 10 degrees C and in the testing room there is 25 degree.
I watched your other video on bore size. Do you have a specific recommendation on bore size? I currently use a 6.01 (stock from Wolverine in my 6 month old MTW) but thought about trying something a bit larger, 6.03 or 6.05. I will buy a top quality barrel (wanted edgi but they are all out so probably a PDI). A buddy of mine swears by the 6.05. I can't seem to find any 6.03s in stock. Is there really much difference between all three? The small mm size seem like it would be inconsequential between the three. I liked your comment about moving the barrel and the larger the diameter the more the bb would move around. Not sure if this is the case why a larger bore barrel would ever be better than a smaller bore.
@@reflexairsoft4648 Thanks for the heads up! Holding out on upgradng my barrel and hop till i watch your video, looking forward to it being uploaded :)
What bucking did you use on this barrel? I watched your videos about BEGADI bucking's. I'm going to buy the same Lambda 455mm 6.05 inner barrel and BEGADI bucking for my KWA Ronin T10 and I would like to know the compatibility of these parts. what result did you get (range, accuracy, what bb's did you use). Which bucking works better on this barrel? Mag 5 or Mag 7 or Fly?
I have to both in my replicas this lambda precision barrel.really nice made barrel it is...let me ask you something..do you find better the super macaron or mr hop bucking?also how do begadis' mag5 and fly5 sit next to maple leafs buckings?
@Reflex Airsoft What are your thoughts on Maple Leaf 6.02mm and PDI Raven? Those are coated barrels and really cheap. Will I notice any difference if I buy this Lambda or Davinci barrel instead? What would you go for if you wanted the best bang for your buck inner barrel?
That depends, let me use cars as a reference. A coated barrels is like a rally car, it does not need that much cleaning or maintenance to work. A stainless steel barrel is more prone to corrotion, dirt ect. So to maintain top performance it needs service and maintenance, like an F1 car So yes your performance will increase with better barrels, but at a “cost”
@@reflexairsoft4648 Thanks! Btw, when should we expect the shooting test? I will probably wait for it before my purchase. Unless you give your blessing to a purchase of a Lambda FIVE. My other premium option is a Da Vinci Akaishi (from Begadi), seems really good except the material is not stainless steel but carbon steel. Quick check on google says that is is prone to rust (tho specification on Begadi says it is rust free), but stronger than stainless steel. What is your take on those?
The test is done and filmed, but working abroard atm, with no wifi and the 4G sucks, so uploading a 20 min vid is not gonna happen atm So yes carbon steel rusts, and it Can happen by just the moisture in the air where the Chromium portion of stainless steel Makes it very hard to rust. I have a da vinci and i placed it in my shed, and it took 7 days to show signs of rust. So i avoid carbon steel in alot of things, exept knifes 😊 I would choose barrel depending on hop Unit, bucking, and nozzle (hpa/type, aeg/maker)
If you know how to install and align bucking/barrel.:Lambda barrel, Begadi mag5 or fly5(depending on bb weight) with omega nub. If you dont know how: lambda barrel, modify flathop, flathop nub eg. Begadi Pro nub
So im getting a new hop unit and was going to follow you inexpensive route, I live in the US but I found a cheap aluminum cnc hopup that looks just like the powair6 one you use. In terms or the hop arm you use the aftermarket flat arm on the mr hop? As opposed to the concave nub they recommend?
Great review dude you videos are actually very helpful! I was wondering if you can make a video about nozzle to hop-up chamber fitment, I have a cyma 0.98 dmr with the v2.5 gearbox and maxx hop-up chamber i am using the standart 24.5mm nozzle but the maxx unit says to use 21mm-22.5mm nozzle length is there gonna be a problem with that or should i leave it as it is?
Im not dead althou I had a spike in “kimnumbers” (danish) of my cancer, but please understand that I do not do this channel because I need to, but only because i want to. And some days the willingness (or energy) is bigger than others.
@@reflexairsoft4648 sorry not trying to spread rumors just miss ya, I’m sure everyone understands take all the time you need. Thank you for creating so many great videos, people don’t often give the best answers to airsoft questions.
@@reflexairsoft4648 I was worried too. Nice to see you're still here ! I Love your content probably the most underrated channel on TH-cam. Take care man, and I hope we'll see more content from you in the future :)
Vorsk Eu18 87mm 6.03 I replaced with a lambda 97mm 6.01 & 60° Deceptercon. I lost 5-10fps but my accuracy want right up. The Deceptercon I think was the FPS loss
![What nobody tells you. [Master Mods rhop barrel]](http://i.ytimg.com/vi/8dvig53qRWU/mqdefault.jpg)
![The GREATEST hop up unit. [MAXX hop up]](/img/n.gif)
Keep on doing videos man! European airsoft lovers need you all across the continent! TH-camrs talk too generally about airsoft, you on the contrary give numbers, examples, detailed descriptions of mechanical gear. Thats fundamental! Pleas do not give up!
hey reflex, I know you were going through some health problems a while back and noticed you havent uploaded in a year. Are you doing okay man?
90% sure hes dead
Any updates on you Reflex? The community needs people like you.
You are missed sir. You are a hero in airsoft. Pls consider doing videos again.
@@bearonguitar OMG Yes, I hope he is doing ok. Thank you for the information.
Great vid! i am glad i stumbled onto your channel. We have 1 to 1 similar views and understanding of the science of airsoft.
I personally like to use the ML HotShot buckings and i am interested in you testing these for yourself. HotShot buckings allow use of GBB barrels in AEGs and i personally see a huge improvement in airseal and FPS consistency and range. would like to see you test the new silicone ColdShot buckings as ML calls them now.
Amazing work you put in! Can wait for the shooting tests! Can you make a video on kwa hop up? Or what can you recoment for the stock kwa hop up really hard to find whats the best bucking
hi, mechanical engineer here :) let me start by saying that I love your scientific approach to things. I also read that you have health issues, it sucks....and i hope you will recover soon. I don't know if you'll ever come back, but in case i would love a video about rifled inner barrels ; i know that the dynamics of an airsoft projectile is different compared to a normal projectile, but my question is : a round bb under the magnus effect is more stable than a classic projectile spinning? what if a plastic bb with the shape of a classic projectile(the ones with the rounded head) and a rifled inner barrel is used?
it would have superrior accuracy but low range because nothing would lift the BB up. Remember we shoot with around 2J when normal weapons have like thousands of J.
I had two lambda barrels and really hate them because of how sharp the window is. Actually I lost 3 buckings by those. Much better choice in my opinion i Da-Vinci Airsoft. I have also heard that Da-Vinci is on pair with PDI. Compating both, the quality is actually the same, but Da-Vinci has longer window. It's still a little too sharp but do not cut the bucking.
Waiting for your shooting test :)
Da-Vinci is run by the guy who used to run Lambda
You can use a very fine sand paper to sand down the edges.
do you prefer five or one, what are the advantages of one over the other, especially for hpa. and compare to the prometheus canon you mentioned, which one do you prefer? And I ve seen a new pdi barrel of 6.15mm, i didn't find any information or opinion, if you've got one, i want it ! And awesome work btw!
Thanks for your videos, they help out so much!
I would say that microns does not exist LoL, i don't believe something that i can not measure. For me, 0.01mm is the lowest reliable value (in the best case).
Gud vid.
Currently using the “old” MR hop. With the new silicone version, would you use the same degree/hardness as with the old rubber version?
I would go one step up in hardness for the silicone vs the regular
PDI does not have other companies manufacturer their barrel… I’ve been at their factory / office in Wakayama.
I hope you are alive and well! All airsoft techs around the globe miss you.
I like to hold a finger on the opposite end of the barrel and push the bucking by the nozzle lips with my thumb so it balloons itself over the barrel rather than stretch over
Great video buddy! But, where is the shooting test ? :(
Nice review! I think these window cuts would be great to r-hop the barrel, the straighter the cut is, the easier should be to install the pad, right?
Dude have you seen the new Begadi Pro CNC hopup? Looks insane
Great detailed video
Thanks mate 👍
Llambda osnt thebonly barrel that has 2 notches. The second notch is for tm m14's. Zci also has them.
Ur right, im working in the metal industry, I am a welder and fabricator as well, Every metal ( alloy and stainless steel even more) deforms by temperature, I think a simple steel tube expand more than a 0.0001milimeter if you go back to your warm room from a +5 degree celcius outside. Total bullshit.
if you take the equation in stainless steel l1 = l0(1+a(t1-t0) and a a of CrNi 80 20 (a=15,5x10^-6) you get a expansion of the inner diameter by 0,00047mm by just switching for 20 to 25 degree C. This means a 6.0500 barrel at 20C is 6.0505 at 25C... so yes, 0,0001 tolarance is just impossible. Even 0,001 will vary if the temperature changes by 10 degree, lets say inside the hall it has 10 degrees C and in the testing room there is 25 degree.
@@KeeepTV bro i never thought that anyone will explain my theory when i wrote it. I didnt miss a lot by far.
hope you're doing well mate
Hi, is the shooting test coming soon? :) Thanks, Aron
It is actually filmed, but am working abroad atm so wifi and 4G is really bad where i am 😊 so uploadning a 20mi. Vid is impossible
Hey Reflex are you still there?...
I watched your other video on bore size. Do you have a specific recommendation on bore size? I currently use a 6.01 (stock from Wolverine in my 6 month old MTW) but thought about trying something a bit larger, 6.03 or 6.05. I will buy a top quality barrel (wanted edgi but they are all out so probably a PDI). A buddy of mine swears by the 6.05. I can't seem to find any 6.03s in stock. Is there really much difference between all three? The small mm size seem like it would be inconsequential between the three. I liked your comment about moving the barrel and the larger the diameter the more the bb would move around. Not sure if this is the case why a larger bore barrel would ever be better than a smaller bore.
Stock mtw doesn't have 6.01
Eagerly waiting for the shooting test ;D
It is actually filmed, but am working abroad atm so wifi and 4G is really bad where i am 😊 so uploadning a 20mi. Vid is impossible
@@reflexairsoft4648 Thanks for the heads up! Holding out on upgradng my barrel and hop till i watch your video, looking forward to it being uploaded :)
@@reflexairsoft4648 Any update for us on potential ETA? Thanks :)
@@reflexairsoft4648 plzz uplad more tests so we have hard data not some bro science BS
What bucking did you use on this barrel? I watched your videos about BEGADI bucking's. I'm going to buy the same Lambda 455mm 6.05 inner barrel and BEGADI bucking for my KWA Ronin T10 and I would like to know the compatibility of these parts. what result did you get (range, accuracy, what bb's did you use). Which bucking works better on this barrel? Mag 5 or Mag 7 or Fly?
What nub do you recommend for the mr hop? The maxx nub?
Hoping the shooting video is going well, can you confirm the barrel window size in MM?
I have to both in my replicas this lambda precision barrel.really nice made barrel it is...let me ask you something..do you find better the super macaron or mr hop bucking?also how do begadis' mag5 and fly5 sit next to maple leafs buckings?
Do you notice better accuracy for barrels with tappered ends?
I have done some similar q/c and your 0.001 mm is probably a random average (x)amount of spots over the
Entire barrel
Hi there! I just bought one of these for my Krytac. Which bucking and hop-up unit would you recommend? TIA
Why not lambda 6.03?
Do you have experience with Da Vinci Raizen barrels?
@Reflex Airsoft
What are your thoughts on Maple Leaf 6.02mm and PDI Raven? Those are coated barrels and really cheap. Will I notice any difference if I buy this Lambda or Davinci barrel instead? What would you go for if you wanted the best bang for your buck inner barrel?
That depends, let me use cars as a reference.
A coated barrels is like a rally car, it does not need that much cleaning or maintenance to work.
A stainless steel barrel is more prone to corrotion, dirt ect. So to maintain top performance it needs service and maintenance, like an F1 car
So yes your performance will increase with better barrels, but at a “cost”
@@reflexairsoft4648 Thanks! Btw, when should we expect the shooting test? I will probably wait for it before my purchase.
Unless you give your blessing to a purchase of a Lambda FIVE. My other premium option is a Da Vinci Akaishi (from Begadi), seems really good except the material is not stainless steel but carbon steel. Quick check on google says that is is prone to rust (tho specification on Begadi says it is rust free), but stronger than stainless steel. What is your take on those?
The test is done and filmed, but working abroard atm, with no wifi and the 4G sucks, so uploading a 20 min vid is not gonna happen atm
So yes carbon steel rusts, and it Can happen by just the moisture in the air where the Chromium portion of stainless steel Makes it very hard to rust.
I have a da vinci and i placed it in my shed, and it took 7 days to show signs of rust.
So i avoid carbon steel in alot of things, exept knifes 😊
I would choose barrel depending on hop Unit, bucking, and nozzle (hpa/type, aeg/maker)
@@reflexairsoft4648 Well then, what would you go for in my case, I have a completely stock Arcturus AT-NY02-CQ
If you know how to install and align bucking/barrel.:Lambda barrel, Begadi mag5 or fly5(depending on bb weight) with omega nub.
If you dont know how: lambda barrel, modify flathop, flathop nub eg. Begadi Pro nub
So im getting a new hop unit and was going to follow you inexpensive route, I live in the US but I found a cheap aluminum cnc hopup that looks just like the powair6 one you use. In terms or the hop arm you use the aftermarket flat arm on the mr hop? As opposed to the concave nub they recommend?
Hey, I would always go for the concave nub for buckings like maple leaf mr hop.
If its a flat hop, i would go for the flat arm style
Any news on the shooting test mate?
Its on its Way, been super busy at my new job, and with everyday life 😊
Im still waiting your video, hope you are great
Great review dude you videos are actually very helpful! I was wondering if you can make a video about nozzle to hop-up chamber fitment, I have a cyma 0.98 dmr with the v2.5 gearbox and maxx hop-up chamber i am using the standart 24.5mm nozzle but the maxx unit says to use 21mm-22.5mm nozzle length is there gonna be a problem with that or should i leave it as it is?
What did you end up doing Aztecs?
@@tytalent4117 Im using the g36 nozzle i think (24.5mm) for about 10 games now and it seems that there are no problems so far
Will this fit in a cyma m14 socom16
Rip reflex
Im not dead althou I had a spike in “kimnumbers” (danish) of my cancer, but please understand that I do not do this channel because I need to, but only because i want to. And some days the willingness (or energy) is bigger than others.
@@reflexairsoft4648 sorry not trying to spread rumors just miss ya, I’m sure everyone understands take all the time you need. Thank you for creating so many great videos, people don’t often give the best answers to airsoft questions.
@@reflexairsoft4648 I was worried too. Nice to see you're still here ! I Love your content probably the most underrated channel on TH-cam. Take care man, and I hope we'll see more content from you in the future :)
@@reflexairsoft4648 omg please get well soon, we can't lose you
@@reflexairsoft4648hey… could you tell us if you are okay?
What would be a good lambda for my crb because there are multiple
L1, L3 or L5 depending on your preference
great... deleting comments... i'll remember that...
Vorsk Eu18 87mm 6.03 I replaced with a lambda 97mm 6.01 & 60° Deceptercon.
I lost 5-10fps but my accuracy want right up. The Deceptercon I think was the FPS loss
danish?
how about lambda L1 6.01？