From start to finish, watch me powder coating my project Goldwing Cafe Racer. Really happy with how this turned out and I'm very excited to continue the build. Subscribe to see the finished project. Thanks for watching!
Pretty rough looking case to start. But as I've found out recently it's not what it looks like on outside... It's the guts that matters and surprises... 🤔😊 I had my cases vapour blasted... Unbelievable result everytime. Hey you an any forums? Just subbed as well... 👍
Woooow. Fantastic job. ❤️ What company was your powder from ??? Also is the red meant to be cleared ? ....because it looked amazing even before the clear went on.
Thanks so much for your compliment! The powder I used is Traffic light RAL red 3001 I bought it off eBay. See link:www.ebay.co.uk/itm/RAL3001-RED-Gloss-Powder-Coat-Paint-1KG-/223887734314?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0 This company sells really good quality powders. Difficult to see on camera but the clear coat does make a difference. Thanks so much for watching 🤟🏍🛠
Hi Yes I did powder coat them. I only did that because I took them to a machine shop afterwards. So they sorted the valve seats for me. They can move out of their place if you heat up the cylinder heads too high temp. 🛠️🤘
My case is just as rough, powder coating as well but leaving some of the old for show n tell :) How did you do all the external bolts, covered the threads? 🤔
Pretty rough looking case to start. But as I've found out recently it's not what it looks like on outside... It's the guts that matters and surprises... 🤔😊
I had my cases vapour blasted... Unbelievable result everytime.
Hey you an any forums? Just subbed as well... 👍
Hey, Thanks so much for your kind words.
Nothing better than vapour lasted aluminium 🙂
I’m not on any forums, just on Instagram and TH-cam!
Very cool bud 😎🛠🛠👌🏻
Thanks buddy! Appreciate it👊🏻
Nice job making it look nice but did you just ruin your oven?
Hey
Thanks very much for the compliment.
I have an oven just for powder coating.
🤟
@@zrcarbon9937 Looked like the oven in your kitchen 😂
Woooow. Fantastic job. ❤️ What company was your powder from ??? Also is the red meant to be cleared ? ....because it looked amazing even before the clear went on.
Thanks so much for your compliment!
The powder I used is Traffic light RAL red 3001
I bought it off eBay. See link:www.ebay.co.uk/itm/RAL3001-RED-Gloss-Powder-Coat-Paint-1KG-/223887734314?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
This company sells really good quality powders. Difficult to see on camera but the clear coat does make a difference.
Thanks so much for watching 🤟🏍🛠
Very nice, is the cylinder bores ready to go or do you do any boring/honing after powder coat?
Hi
Thanks. Yes the cylinders ready to go. The powder coating won’t effect the cylinder walls 🛠️🤘
What about the cylinder heads and can you powder coat them or is the heat to much on the cylinder heads to powder coat?
Hi
Yes I did powder coat them. I only did that because I took them to a machine shop afterwards. So they sorted the valve seats for me. They can move out of their place if you heat up the cylinder heads too high temp. 🛠️🤘
Not to worry about engine deformation when outgas at 300 degres Celsius?
Not at all
Takes more heat to have that issue.
The oven didn’t really reach 300c. Stopped at 260c
Thanks for watching 🛠️🤘
Yes, its warped for sure. It just wasnt tested correctly.
My case is just as rough, powder coating as well but leaving some of the old for show n tell :) How did you do all the external bolts, covered the threads? 🤔
Check out this video. This is exactly how I done all the hardware. th-cam.com/video/833q83V1rkE/w-d-xo.html 🤟
InstaBlaster...
This is what not to do to an engine you care about. The reason engines arent powdercoated, it causes warping, and changes metal properties.