Yes….ALL THE WAY…. this is exactly what I did yesterday with my genesis GV 80…… my man, you are so right and correct as you spoke I listened and understood that it’s not just the two of us. Others need to learn this product application. Thank you great job! Allan
wish I watched this before waxing my car this morning! Will definitley use your method, as I couldn't believe how hit-and-maiss and wasterful the rinse-off method was (not to mention lucrative for the manufacturer). Great vid!
As you said just clean the car, leave it wet, spray once per panel and spread it with a plush towel. Less is more, if you apply too much it smears and you'll need to use a detailer to remove the excess. As you say, the whole spray on rinse off is just to make you use more product.
I just used this product today on my F150. Was at the car wash so I washed it then sprayed it on then did a total wipe down, rinse again and proceeded to dry off and buff to a shine. I must say seems to work as intended . I did spray too much and it was very streaky but the second rinse fixed the issue. I’m happy with the results. Lots of 👍
I watched the official Meguiar video on how go apply this product, and yes, cannot stop thinking why you spray it unevenly and immediately rinse it with jet washer. SO ILLOGICAL! I found your video, and this is it! You are right, they want you to waste more to keep the sale level of the product, but for us as user, we need an effective and efficient way to apply it. Thanks bro.
I found that using a latex glove to spread it when dried and sprayed slightly wet with a water spray bottle forst and having the wax spray distanced into the panel works best.
Hi thank you for the tips on how to deal with the streaking from the initial application, i tried to buff it off but it was kinda oily like rainX, and just like rainX I followed your advice and rinsed and dried the car again.. voila no more streaks! Thank you
I've used this product by just spraying a single shot into the wash mitt & wash a panel around the whole car including the wheels. Let it cure for about a minute before rinsing the whole car (I use an old school garden hand pump 2-gallon sprayer, then towel dry from the top down. Had the same bottle of wax for about six months & maybe use 3 gallons of water for an average size car. Great results from a great product.
I used this on my dark blue car, so far I am amazed with it. I finally see water beads on the paint. I hope it last me at least 2-3 weeks every time I spray it on my car.
It should last several months if you use the dry application method! Wash/dry the car completely. Then spray it on the DRY car and rub it into the paint like a regular wax and buff off the excess. Everytime you wash you can use this method in the video to keep adding layers.
For best results apply this product, "dry". It can last over year long when you apply it this way. Meguiars want you to spray it wet so u can use the whole bottle and buy more.
OK follow the instructions on the can but use it with care, make sure you activate with a pressure washer then towel down for great finish. And FULL prep with clay bar and remove old finishes, if the panel beads water there are still old finishing products there. use a diluted rubbing alcohol to clean them off. Then apply the ceramic finish
Per company video the rinse is what activates the product. Don’t understand why one would not follow the directions made by the creator of the product.
The rinse doesn't do anything to activate the product, the product doesn't require activation. If you check out Car Craft's video it shows the difference between dry application vs the company recommended rinse application. The dry application lasts much longer on the paint and is much more resilient. He does a torture test and performance comparison between both methods. th-cam.com/video/s1rMMrOqGTg/w-d-xo.html
The second that stuff hits a water droplet it breaks the surface tension and runs off which I could see how that could cause a streak or an even product application. It seems a lot more sensible to apply it with a damp applicator.
Great idea. I usually wash. Still wet I spray on and wipe off with “micro fiber” But your method emphasizes the “a little goes a long way”. So I will just spray the damp cloth.
@@abuzar1 I saw his video and decided to go with the dry application. However, I didn't see any beading on the hood and only a slight change on the front bumper. I went ahead and did the whole car anyways and figured I would check the whole car tomorrow. Not impressed at this point, not even if it was $10.
It doesn’t. You get superior performance by doing a dry application. Many videos on here doing side by side comparison. I’ve linked them before to other comments.
Hello guys im a complete beginner and i clean my car every week using a pressure washer. I love the result using this product but i want to know how often should i use this product? Is it ok if i use this every week? Please help me guys thank you 🙏
If you do the dry application it should last months. However you can add on layers. The more layers of protection the easier the car will be to just clean off with the pressure washer.
@@1980Aioria Much much easier to apply properly, doesn’t leave streaks and lasts longer in my experience. The ease of use is the main thing though. I’ve been meaning to make a video on it but very limited on time.
It works better on dry panels with damp cloth followed by drying cloth. One for application another for buffing. You use less and get a better finish. And don't waste it on the spray and rinse method. At some point the water won't bead up, than re apply the wax. The instructionson on this wax are stupid. Follow them to waste the product and constantly have to re apply
Silly to make a video and not show the results. If you had sprayed it off to show the results it would have been complete. It needs buffing off as well.
And you are a Doctor?????? UMMMMM READ THE LABEL...... YOU APPLIED IT INCORRECTLY..... AND BECAUSE YOU ARE A DOCTOR???? YOU APPLIED THE PRODUCT WRONG....WRONG.....WRONG... HAVING MONEY DOES NOT GIVE YOU GOOD SENCE...
The whole point of the video is to show you an alternative method of applying the product that is not on the label. I discussed it in the video. Thanks for watching!
I appreciate your concern for the environment and unnecessary waste of product.
A man of reason lmao, I was just watching their video wondering why the hell would you rinse off a wax 😂
Yes….ALL THE WAY…. this is exactly what I did yesterday with my genesis GV 80…… my man, you are so right and correct as you spoke I listened and understood that it’s not just the two of us. Others need to learn this product application. Thank you great job! Allan
The damp applicator method works great on clean, dry paint too.
wish I watched this before waxing my car this morning! Will definitley use your method, as I couldn't believe how hit-and-maiss and wasterful the rinse-off method was (not to mention lucrative for the manufacturer). Great vid!
As you said just clean the car, leave it wet, spray once per panel and spread it with a plush towel. Less is more, if you apply too much it smears and you'll need to use a detailer to remove the excess. As you say, the whole spray on rinse off is just to make you use more product.
I just used this product today on my F150. Was at the car wash so I washed it then sprayed it on then did a total wipe down, rinse again and proceeded to dry off and buff to a shine. I must say seems to work as intended . I did spray too much and it was very streaky but the second rinse fixed the issue. I’m happy with the results. Lots of 👍
Just did the same thing. Works great
I watched the official Meguiar video on how go apply this product, and yes, cannot stop thinking why you spray it unevenly and immediately rinse it with jet washer. SO ILLOGICAL! I found your video, and this is it! You are right, they want you to waste more to keep the sale level of the product, but for us as user, we need an effective and efficient way to apply it. Thanks bro.
You’re welcome! Yeah they just want you to buy more
I found that using a latex glove to spread it when dried and sprayed slightly wet with a water spray bottle forst and having the wax spray distanced into the panel works best.
honesty goes a long way, thanks for the advice
when i saw Meguiars method, it seemed so odd to just spray a few spots and then rinse it off. wiping it seems like a better way to do it
They want you to buy more lol
Hi thank you for the tips on how to deal with the streaking from the initial application, i tried to buff it off but it was kinda oily like rainX, and just like rainX I followed your advice and rinsed and dried the car again.. voila no more streaks! Thank you
I have tried both methods on my black truck. Doc your method is the best yet ! 🍻 I have favorite this video to remind myself lol
Another informative video. You're an absolute treasure! Keep it up and I'm sure people will begin to notice!
I've used this product by just spraying a single shot into the wash mitt & wash a panel around the whole car including the wheels. Let it cure for about a minute before rinsing the whole car (I use an old school garden hand pump 2-gallon sprayer, then towel dry from the top down. Had the same bottle of wax for about six months & maybe use 3 gallons of water for an average size car. Great results from a great product.
I used this on my dark blue car, so far I am amazed with it. I finally see water beads on the paint. I hope it last me at least 2-3 weeks every time I spray it on my car.
It should last several months if you use the dry application method! Wash/dry the car completely. Then spray it on the DRY car and rub it into the paint like a regular wax and buff off the excess. Everytime you wash you can use this method in the video to keep adding layers.
For best results apply this product, "dry". It can last over year long when you apply it this way. Meguiars want you to spray it wet so u can use the whole bottle and buy more.
Yeah the dry application is best to establish a base coat.
@@abuzar1 is it make sure the car is very clean, then dry the car, then spray and wipe with damp cloth ?
This works better for me too. I wash my car before and after. And it's amazing.
OK follow the instructions on the can but use it with care, make sure you activate with a pressure washer then towel down for great finish. And FULL prep with clay bar and remove old finishes, if the panel beads water there are still old finishing products there. use a diluted rubbing alcohol to clean them off. Then apply the ceramic finish
Per company video the rinse is what activates the product. Don’t understand why one would not follow the directions made by the creator of the product.
The rinse doesn't do anything to activate the product, the product doesn't require activation. If you check out Car Craft's video it shows the difference between dry application vs the company recommended rinse application. The dry application lasts much longer on the paint and is much more resilient. He does a torture test and performance comparison between both methods.
th-cam.com/video/s1rMMrOqGTg/w-d-xo.html
I do the same , I spray it on with the car is wet and that's it no need for a second spray that your spraying off
I think a better way to apply it is to just get a damp sponge or microfiber towel, spray it on this tile or sponge and put it on dry paint.
Thank you for the video😊 do we need to apply another layer?
I just do one layer of spray wax because I wash my car so frequently
Logically..you're absolutely right. .
Great Video I just can not take a garden hose to my bike it's never been wet that is great advice for us bikers 👌
thank you for the easy to understand and to the point explanation - thanks
No matter what, the stains remain in the paint in some parts. And if I press to hard when I try to dry it, it will scratch my paint.
Honestly if you want a spray on product use CMX. It’s so much better than the meguiars.
Agree! Just bought a bottle and in no way would i spray it then rinse it off with a high pressure washer
The second that stuff hits a water droplet it breaks the surface tension and runs off which I could see how that could cause a streak or an even product application. It seems a lot more sensible to apply it with a damp applicator.
hell yeah ima try it out, ive been using adams h20 guard like this
I this this today & it works way better I think
Great idea. I usually wash. Still wet I spray on and wipe off with “micro fiber” But your method emphasizes the “a little goes a long way”. So I will just spray the damp cloth.
i realize it is kind of randomly asking but does anyone know of a good website to watch newly released tv shows online ?
@Jaxon Caiden I watch on Flixzone. Just search on google for it =)
@Dante Bennett Yup, have been watching on Flixzone for since march myself =)
@Dante Bennett Thanks, signed up and it seems to work =) I really appreciate it !
@Jaxon Caiden No problem :)
Thanks for sharing. Does this product protect from the sun?
Did a polish first then this, stuff lasted 6 months then just re flashed it over wet body work jet washed it off dry it boom another 6 months
Good content!!
Good demo!
👍💪👍
Thanks man, sub to the channel if you get a chance!
For $23+ with tax....so far no beading. Wasted a lot on the foundational spray.
Check out this video for a dry application. It makes the best foundation. th-cam.com/video/s1rMMrOqGTg/w-d-xo.html
@@abuzar1 I saw his video and decided to go with the dry application. However, I didn't see any beading on the hood and only a slight change on the front bumper. I went ahead and did the whole car anyways and figured I would check the whole car tomorrow. Not impressed at this point, not even if it was $10.
@@kurtsmith7588 That's odd, you might want to get your money back. I've used it on 5 of my cars with excellent results.
@@kurtsmith7588 Beading is overrated though. As long as the product sheets off water and protects your paint.
Whats the difference between the green bottle and the blue bottle ?
The bottles are very weak and prone to cracking
Dry panel application works better for durability
Yes, I do prefer that method for the first time.
When you wash the microfiber towel doesn’t the product get into the environment that way?
Jokes on you I never wash it
@@abuzar1 What do you, do burn it?
God I hope so!
No wonder the ocean is beading water like crazy!
the high pressure washer activates the product. that's why you should flush the car
It doesn’t. You get superior performance by doing a dry application. Many videos on here doing side by side comparison. I’ve linked them before to other comments.
Hello guys im a complete beginner and i clean my car every week using a pressure washer. I love the result using this product but i want to know how often should i use this product? Is it ok if i use this every week? Please help me guys thank you 🙏
If you do the dry application it should last months. However you can add on layers. The more layers of protection the easier the car will be to just clean off with the pressure washer.
This is exactly what I needed to know
Thanks so much🤙
Does this wax give more gloss than meguiar's liquid hybrid ceramic wax?
It’s the same. I actually prefer CMX spray much more compared to this now.
@@abuzar1 thank you for your answer. Why do you prefer CMX?
@@1980Aioria Much much easier to apply properly, doesn’t leave streaks and lasts longer in my experience. The ease of use is the main thing though. I’ve been meaning to make a video on it but very limited on time.
Can we use this on the 3M protection film too?
Yes! It will protect it and help with hydrophobic behavior.
Best vid
Did not get the results I was looking for
It works better on dry panels with damp cloth followed by drying cloth. One for application another for buffing.
You use less and get a better finish. And don't waste it on the spray and rinse method.
At some point the water won't bead up, than re apply the wax.
The instructionson on this wax are stupid. Follow them to waste the product and constantly have to re apply
Not doing it by directions doesn't give you optimum coverage as engineered
good vid boss
Thanks! Please subcribe if you liked the video!
smart
What's good on that mustang bruh
Mohammed Salem Engine swap video coming soon on the mustang!
Silly to make a video and not show the results. If you had sprayed it off to show the results it would have been complete. It needs buffing off as well.
Oh for Pete's sake, just follow the directions. Don't over think this.
Just providing an alternative. It works better.
@@abuzar1Perhaps, it does. I'm using it and am pretty happy with it. Just gotta follow the directions. Thank you for putting this video together
SMH
Wash your car. Dry your car. Spray product directly on dry car. Buff car with dry micro fabric .Repeat. Frickin shine is sick
And you are a Doctor?????? UMMMMM READ THE LABEL...... YOU APPLIED IT INCORRECTLY..... AND BECAUSE YOU ARE A DOCTOR???? YOU APPLIED THE PRODUCT WRONG....WRONG.....WRONG... HAVING MONEY DOES NOT GIVE YOU GOOD SENCE...
The whole point of the video is to show you an alternative method of applying the product that is not on the label. I discussed it in the video. Thanks for watching!