ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- #trucking #ownerioerator #a/c
injector tool amzn.to/3Csiini
cool ox fuelox.com discount code diysemi
UV dye amzn.to/3pCZtX1
pag 100 oil amzn.to/3chG1fw
Looking for a reputable factoring company? Call Ashley Vogan at Triumph at (915) 331-1606 (Office) Be sure to tell her I sent you!
www.invoicefac...
link to my merchandise diy-semi.creat...
Join this channel to get access to perks:
/ @diysemi
If you are looking for a good driver freindly ELD system that is easy and affordable, click this link mbsy.co/3qz8Jl.
Fuel Ox For the world's best fuel additives, catalyst, and antigel, go to FUELOX.COM
use promo code DIYSEMI for 15% off every order!
MUDFLAP
For some great fuel discounts with out needing to use a fuel card, watch this video... • The best dang fuel dis...
Download the Mudflap App onto your phone and use the promo code diysemi when signing up to receive $10 in free fuel!
AMAZON
Need something from Amazon? Use this free link to help support the channel. amzn.to/3o7vIuy
CASH APP
I do not solicit donations, but if something i did really helped you and you feel moved to do so, my cash app is $diysemi
#trucking #ownerioerator #a/c
injector tool amzn.to/3Csiini
cool ox fuelox.com discount code diysemi
UV dye amzn.to/3pCZtX1
pag 100 oil amzn.to/3chG1fw
you can inject the dye directly by snadwishing it in between the discharge and suction line using a gauge manifold.
The polymath of trucking himself. Great stuff 👍🏻👍🏻
Always appreciate all your knowledge. Thanks for sharing with us.
Nice video. Thanks. Which injector do you recommend. Type 1 or Type 2? thank you
I rented this exact model from AutoZone. I'm watching you to find out how to use it and the instructions say NOT to run the ac or MOTOR while pumping that dye in....... And when I saw you with the motor running I said to myself, wait a minute.. this guy gone get me fuked up 😂😂😂
All in all good video. Thanks bro. I'm going outside right now at 10:40 pm to try it. I've got my Goggles and gloves. Wish me luck. 😢
Hello, I added the PAG oil on my compressor through the suction side. Did I make a mistake? I read the oil should be introduced through the high pressure (smaller side). I can try again as I haven’t yet run the compressor.. Or is it ok to go forward with installing the rest of the A/C components?
Personally I would take the time to take it out and put it in where it is supposed to be.
@@DIYSEMI Thanks. Actually I did put it i the right port (suction side) according to a very thorough video I saw. Thank you.
What if your leak is too great that your compressor won’t turn on? Can you inject the dye and oil anyways? I’m not sure where my leak is but I can definitely smell it after filling with refrigerant and turn on car and ac.
You can try
So I have one of these tools in my shop. Everytime I try to use it I hook it up and turn on the ace but it is so hard to twist. It's like product isn't coming out. What am I doing wrong? Is it the fact that I'm not bleeding it?
bleeding it helps, but they do naturally turn hard
1/4 an ounce 1/2 absolute max!!!!! As far as ac dye goes
Can someone solve this arithmetical puzzle from the Shop Manual? It states in the Manual (car is 2001 Saturn SL2):
The Saturn air conditioning system requires 150 ml (5.07 oz) of PAG compressor oil. Service compressors have 65 ml (2.20 oz) of PAG oil installed.
New oil quantities must be added to the system during component replacement and conditions stated as follows:
With no signs of excessive oil leakage, add:
Compressor: Remove, drain, and measure oil. Drain the replacement compressor. Add the same amount of new PAG compressor oil drained from the removed compressor to the replacement compressor.
Evaporator: Add 67.5 ml (2.25 oz) of new PAG compressor oil.
Condenser: Add 22.5 ml (0.75 oz) of new PAG compressor oil.
Receiver-dehydrator: Add 30 ml (1 oz) of new PAG compressor oil.
Open the R-134a source valve(s) and allow 0.50 kg (1 lb) of liquid R-134a to flow into system through low side service fitting.
As soon as 0.50 kg (1 lb) has been added to system, start the engine, set the mode control to vent, the temperature lever to full cold, the blower speed on high, and push the A/C compressor button to the On position (A/C control button light On). Slowly draw in the remainder of the refrigerant charge 0.23 kg (0.5 lb). The total system charge is 0.68 kg (1.5 lbs).
I'm reading all that information in my Shop Manual and don't get this:
If the total amount of refrigerant oil is 5.07oz and 2.25oz goes into compressor, then for Evaporator, Condenser and Receiver Drier is left only 2.82oz (5.07-2.25=2.82oz). But if to add what is recommended for Evaporator, Condenser and Drier it will add up to 4.0oz (2.25+0.75+1.0=4.0oz), with the total in the system 6.25oz (4.0+2.25). How much oil on total is in the system: 5.07oz or 6.25oz? Where I'm wrong? I'm replacing everything besides the Evaporator and Compressor (I'll remove it and flush w/solvent though), those I'll just flush with solvent. No info on Refrigerant Oil under the hood or in owners manual, or in Haynes book. Thank you.
I remember the video with the pickup truck!
At ab 5:37 is where another Amazon company stole a screenshot from your video and posted it as their stock photo. Seller name ransoto model B injector last photo
Holy cow thanks for the info
Love this 😀 thank you 😊 ❤️
Hey driver, appreciate you walking me through changing out my compressor. But now it runs for 15 min or so then shuts off. Is it possible that I added too much pag oil? Pulled a code that says not enough refrigerant in the system. But I’m not able to add any. Could too much oil be in it? I’m stressing that? Because I think I added too much.
They have oil testers they are plastic tubes with absorbent.
You're a busy guy!
right on man 😊 Good video!
Amazon, What's that?
It's at your mom's house
Some big forest somewhere.
@@DIYSEMI that's what she said
I dont like advertising people for smthng not needed..we can use the low pressure hose to inject 1/4 oz dye and let the pressure of the can do rest.
In the 242 Bahamas like yr video was good
After changing out my compressor, should I add the oil before or after I do a moisture vacuum? Thank you.
I install the oil from a bottle directly into the accumulator just before pulling vacuum. I first pull a vacuum for vacuum leak check, charge with dry nitrogen for pressure leak check, bleed off the nitrogen, add the oil then pull another vacuum and break that vacuum with refrigerant charge weigh-in.
Thank you, greatly appreciated.
@@samuelberry4311 I added more detail, not sure if you saw it.
@@samuelberry4311 Be sure you break the vacuum with refrigerant, the vacuum will suck the entire charge in through the high side with engine and compressor off.
The reason is if system is under vacuum, it's too easy to pull air into the system and it won't work well with air in it.
Thank you
Tell me about the Cool Ox. It’s sold for $100. Does it really work the $100?
I'll do a few more videos on it...you can decide for yourself. that bottle treat alot of a/c's . your truck will only take one or 2 ounces
@@DIYSEMI Can it be used in cars or just trucks?
Great info! Thanks!
Thanks Adam
Adam, stop teasing us and just do a video on your farm tractors. I caught a glimpse of them behind you.
I'm a tease
@@DIYSEMI agreed 👍 🤣
I have the same injector from Amazon but my connectors are different. I have a low side with the screw on off knob. I could not bleed the air out with the knob up or down. I seen how you could bleed yours so I gave a little time looking at what I had different. My kit had a plain high side connector that had a low side nipple on top. I released the pressure and connected the low to the high adapter screwed in the knob and out came the oil. Phew that was harder and came without instructions so thanks.
i would inject it without compressor being turned on you could damage the reed valves cause liquids cant be compressed cause they are dense no space between the molecules i would inject them and let them settle slowly over night
I haven't found any techs that object to using a different/better oil in an ac system. One went on a rant about how terrible pag oil is.
I put some hotshot secret fiction modifier into my houses mini split. Nothing bad has happened at least, lol.
Raise your camera slightly so we can see what you're doing!
Thanks for sharing !!! A++
Fly me to your house so I can do tractor reviews. My Porsche GT3 videos bombed.
Im flying into boise friday night...meet me there
@@DIYSEMI wish I could, we are heading into California for a VW show!
@@SterlingWheel say hi to Herbie for me
You not suppose to put liquid in to the vapor side
nice dongle
Wow all that talking amd didnt show pushing it in.. huh...
I have a whole video on that