THINGS I SHOULD HAVE MENTIONED IN THE VIDEO: - Instead of cutting pour spouts and vents into the silicone, you can form them during the clay bed part. In the past I have used golf tees, dowels, Sharpie marker caps, toothpicks (for air vents), Lego pieces, and more. You simply embed these halfway into the clay the same as you would the figure, and leave them in while pouring the silicone. Once removed, you will have CLEAN-looking pour spouts and vents. - When pouring up thick viscosity materials like silicone, I prefer to pour into two open mold halves, then quickly slap them together, because forcing the silicone down through a narrow pour spout takes longer and is subject to more bubbles. Pouring the halves open like this allows you to run a toothpick or similar around the molds, eliminating surface bubbles. Steady Craftin videos are made with the help of DIRECT SUPPORT: www.patreon.com/steadycraftin (You'll also get access to the printable 3D scans of my original sculpted figures, MP3s, exclusive behind-the-scenes videos, shop discounts, and more.) My family and I are so grateful that I get to do this.
When I first played the game I looked at my lady & said, "These lil guys kinda remind me of TheCrafsman's Free Range Chicken." And she was like, "Now I'm just gonna think they're chickens under those space suits." Also CrafSon knocked it out of the park on the sculpt. The proportions and profile are spot on.
You have no idea how happy my whole family is on the popularity of your Channel TheCrafsMan. I've been here a while and it was a super beautiful feeling when my kids came up to me and said "Daddy, have you heard of TheCrafsMan?” Recently my kids have showed me Among Us and they ALL love Squishies so it was yet another beautiful moment to watch this video together. Thank you for being you TheCrafsMan!
@Marijo yepez Dicen que: Díganle a crafson que logró la escultura a la perfección. El perfil luce igual que su parte animada. ¡Gracias por eso! Él apreció haber escuchado esto :D
Hey sir, my family and I adore your content. You are a safe place here on the internet and we are so grateful for what you do. Keep being amazing. God bless, and love you loads
As an established Gunpla builder and an aspiring resin conversion kit maker, I beg of yall, please forgive me for just now discovering this channel....I love everything about this and you inspire me to do great things!
If you want to make a mold without any bubbles on the subject, I find that if you take a paintbrush and brush mold material all over the surface first, there's never any bubbles. It also guarantees the material gets into all of the crevices. Then pour normally after that.
Very good idea! I probably need to do that instead of rubbing my finger down in the mold. LOL! But for open molds like this, it's a surefire way to eliminate surface bubbles.
My daughter is in love with your videos. She's 3 months old and has torticollis, so part of her daily routine right now is stretching her neck muscles and encouraging her to turn her head to her non favored side. Her Dr recommended a small amount of screen time while we're doing these stretches to help her stay calm, and your videos are the only ones so far that keep her interested and relaxed! Of course, your videos teach me a lot too and I'm really excited to try making my own squishy figures soon. Thank you TheCrafsMan!
@@nicholleholmgren6280 Well, it would be a compliment to my future, (and most likely imaginary) wife, shouldn't be something to say to a woman you don't know, that would be weird...
Crafsman: The mica powder brushed onto the mold may rub off and get everywhere after handling the finished piece. To prevent this, you can coat the metallic mica visor with something called Psycho Paint after demolding. It's glossy, clear, won't affect the color, and is super easy to apply!
It has held up pretty well. I've found that if you make it too clumpy, that outer bit of mica can indeed rub off. I got some Psycho Paint years ago for painting color onto stop-motion puppets, but have never considered using it as a coating! Fabulous idea! Thank you!
Among us crewmates and recycled silicone? You been spying on my stuff again, Crafsman?! Just kidding. This little guy turned out so great! Crafson has some skills!
Gear Grinder! :D :D :D :D :D Mannn, when I saw your Instagram posts last week with the little Among Us guy, I said "Ohhhhh man..." It reminded me of when I did the Hydro-Dipping episode that came out right after someone else's. But I'm so slowpoke that I'd been working on it for a week. This video had more preparation than my average ones due to the addition of my lil buddy. I'm for real encouraging him to take over. :D
@@TheCrafsMan I've got another video that I probably could have had done sooner too, but it's no race. I'm just flattered as heck that you even noticed my stuff. You've been a huge inspiration for getting me to work harder and force myself to sharpen my skills. And it would be super awesome to see what crafson can do!
Crafsman... you have the best workspace ever and is DEFINITELY film worthy. I’ve been watching your channel for a long time and you are the only channel that’s gotten me through school. So thank you kindly.
For smoother sprues without nicks that slash into the mold body: Take a long skinny scalpel blade, heat it in a flame and bend it sideways into a u-shape when it glows. It forms a kind of 'crooked knife', kind of like a gouge with the handle turned ninety degrees. Use the U to cut smooth bottomed ribbons of rubber out of the way. Gets dull quickly, but blades are cheap.
Oh gosh I just got to the part where you mentioned me and had a small happy heart attack 😭😂 Spaaaaace! This is such a fun game. OH MY GOODNESS HELLO CRAFSSON
Glad to read this! :D There are other techniques as well, apart from mica powders. You can even pour a solid color into a separate cavity (like the visor spot), let cure, and pour the rest of the figure. The parts will stick together very well and be a solid unit. (You can do this with resin, but try to time it where the first part isn't 100% cured, so you get that thermal fusion going.) :)
@@tonilarimore6079 It actually sticks to the mold fairly well. If there are any caked up parts, that may sorta fall down if the mold is bumped a lot during the pour. But in my experience, an even layer clings to the silicone well.
Oh man. When you made it fly through the space background I had a good laugh. You ready have an excellent sense of humor. Also, Crafson looks just like ya. Glad to see he's taken a shine to steady craftin.
Oh, dear, I am delighted again, since TH-cam stoped e-mail notifications I lost you, I hope not anymore, this is delicious to watch, I was very happy to meet your son!
0:00 - 0:24 I love this intro! 9:54 You add objects into the liquid to increase the coverage! Smart Move! 16:38 Red was not the imposter. You have 2 imposters remaining. 17:10 He's shaking his head ever so slightly broadcasting "No, I don't, pa..." 17:36 That's pretty slick! I like that one.
The silicone pouring scene had a great aesthetic. You are not just a great figure creator but also really good at making these videos. Much love, your voice always reminds me of Mitch Hedberg.
I'm telling you Mr. The Crafsman, your music is amazing. I really wish you'd look into "Distro Kid" and get yourself the ability to post stuff on Spotify! Man... Love it! Thanks for the video.
My man, thank you! :D I sincerely appreciate your encouragement. I post MP3s to Patreon every now and then, but feel like I'd need some more substance to the songs to be worthy of Spotify and that. But thank you for the super kind words!
@@TheCrafsMan Sir, Your collection would really be appreciated by those of us that are in the car on long drives or just need a back drop of sound for different things that are going on during the day. I could see your music being even bigger than your Crafs stuff as it really is kind of what I'm here for. I enjoy the videos for sure, I really do; but I'm not a crafter. I think this just speaks volumes to your musics wide appeal and well to your overall appeal. Nonetheless, as always, I'm proud and honored that you'd take time out to reply. Thank you very much. Sincerely, Trae McCombs (S1cnus on reddit)
Brilliant video as always. Smooth-On should feature your videos. They are very fun to watch and easy to follow. Maybe as a follow up video you should use this same mold and make a split body with a harder plastic bone embedded in the middle!
I cannot stop smiling when I watch crafsman. No matter how many comments I see about how great he is, I still feel more could could be said. He's captured the perfect cozy-feeling of an independent creator with tremendous quality and effort. May he continue to flourish.
Crafsman went crazy flipping those molds together like that haha. I wouldn’t have the nerve to do something like that. But crafson appearance had me rollin. So cute haha
Hey CrafsMan, another great video. The construction paper backgrounds are neat and I like them a lot. But I kind of miss the workshop, I think it has a lot of character and makes the crafts look a little more accessible when you don't have a fancy background.
The voice makes me laugh every single time hehe and the way he pronounces those freaking words I love this channel and the amazing crafts that this dude makes are so good .
I had a friend in elementary school that talked like him and his mother too. The one word that always made me laugh when they talked was when they said the letter “R”. They pronounced like “ are-a”; rrr-aaaa. Lol!!! ❤️💪🏼👊🏼👍🏻👍🏻
Gracefully AND indiscriminately, that's a trick right there. Woops forgot to add sophisticated precision, too. Thanks for the flirting tip on the Webster's, gonna see how that works. Update: it worked pretty well, although the Mrs did roll her eyes a bit, first.
I work with casting silicone and I highly recommend using MANN 200 as a release agent. It releases way easier and it will prolong the life of your molds.
Can we just pause a reflect on how far crafsman music has come. Honestly he should start making soundtracks and releasing them or make soundtracks for video games and short movies. Your so talented crafsman. 😁
GASP! Crafson finally shows up! That's adorable XD Also I ordered my first mica powder pigments for resin this weekend! I'll be using them in UV resin and two-part epoxy resin for various projects, so it's good to know about adding it to one half of the epoxy stuff instead of both.
Hey Crafsman, you can put a couple lengths of dowel into your sculpting medium before making the mold and avoid all that mess of cutting vents into it. It also makes the mold look a little nicer for if you ever want to make duplicate molds.
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
THINGS I SHOULD HAVE MENTIONED IN THE VIDEO:
- Instead of cutting pour spouts and vents into the silicone, you can form them during the clay bed part. In the past I have used golf tees, dowels, Sharpie marker caps, toothpicks (for air vents), Lego pieces, and more. You simply embed these halfway into the clay the same as you would the figure, and leave them in while pouring the silicone. Once removed, you will have CLEAN-looking pour spouts and vents.
- When pouring up thick viscosity materials like silicone, I prefer to pour into two open mold halves, then quickly slap them together, because forcing the silicone down through a narrow pour spout takes longer and is subject to more bubbles. Pouring the halves open like this allows you to run a toothpick or similar around the molds, eliminating surface bubbles.
Steady Craftin videos are made with the help of DIRECT SUPPORT:
www.patreon.com/steadycraftin
(You'll also get access to the printable 3D scans of my original sculpted figures, MP3s, exclusive behind-the-scenes videos, shop discounts, and more.)
My family and I are so grateful that I get to do this.
When I first played the game I looked at my lady & said, "These lil guys kinda remind me of TheCrafsman's Free Range Chicken." And she was like, "Now I'm just gonna think they're chickens under those space suits." Also CrafSon knocked it out of the park on the sculpt. The proportions and profile are spot on.
crafsman you dont need that much pigment the colors are extremly concentrated but other than that i love your videos keep steadycraftin!
You have no idea how happy my whole family is on the popularity of your Channel TheCrafsMan.
I've been here a while and it was a super beautiful feeling when my kids came up to me and said "Daddy, have you heard of TheCrafsMan?”
Recently my kids have showed me Among Us and they ALL love Squishies so it was yet another beautiful moment to watch this video together.
Thank you for being you TheCrafsMan!
BRUH
Can I just tell you how amazing your voice is?
Crafsson has your eyes.
yeah crafsman only had one set
😂😂😂
I think he looks more like his mother
But he has his mother's nose
I want my eyes back
Tell crafson that he got the sculpt absolutely perfect! The side profile looks exactly like the animated counterpart!
Thank you for that! He appreciated hearing this! :D
@@TheCrafsMan no te entiendí :(
@Marijo yepez Dicen que:
Díganle a crafson que logró la escultura a la perfección.
El perfil luce igual que su parte animada.
¡Gracias por eso!
Él apreció haber escuchado esto :D
@@ARIANA-eh2qt gracias por traducirlo
M
Hey sir, my family and I adore your content. You are a safe place here on the internet and we are so grateful for what you do. Keep being amazing. God bless, and love you loads
Hearing this does my heart good. Thank you so much! I hope you and your family continue to enjoy!
Best content I've seen on the internet in a really long time.
Is this crafsson's first appearance?
I believe so!
He has snuck his little hands into previous videos, and has facilitated with sculpts, but this is the first where he is straight-up appearing in it.
@@TheCrafsMan cutest thing alive
@@TheCrafsMan All we need now is Crafsmamma. I love her low key sass when she's tellin' ya', Crafsman.
That sculpt was great!
Crafson is better that baby yoda prove me wrong
I don't usually upvote a comment but I had to.
@@AL3Xtube eh..
reddit moment
@@underscoredb Yeah.. 😬
@@AL3Xtube reddit big chungus wholesome uganda knuckles epic gamer guy moment
As an established Gunpla builder and an aspiring resin conversion kit maker, I beg of yall, please forgive me for just now discovering this channel....I love everything about this and you inspire me to do great things!
Cutting up old molds and putting them into curing silicone = BRILLIANT!
If you want to make a mold without any bubbles on the subject, I find that if you take a paintbrush and brush mold material all over the surface first, there's never any bubbles. It also guarantees the material gets into all of the crevices. Then pour normally after that.
Very good idea! I probably need to do that instead of rubbing my finger down in the mold. LOL! But for open molds like this, it's a surefire way to eliminate surface bubbles.
My daughter is in love with your videos. She's 3 months old and has torticollis, so part of her daily routine right now is stretching her neck muscles and encouraging her to turn her head to her non favored side. Her Dr recommended a small amount of screen time while we're doing these stretches to help her stay calm, and your videos are the only ones so far that keep her interested and relaxed! Of course, your videos teach me a lot too and I'm really excited to try making my own squishy figures soon. Thank you TheCrafsMan!
You teach in the best way! :)
"Is your name Webster's Dictionary? Because you have all kinds of definition"
Saving that in case I ever get a wife lol..
A line like that might just get you a wife. Craftsman might have a sideline giving dating advice.
As a woman I would say no. . . do not use that line on me.
@@nicholleholmgren6280 Well, it would be a compliment to my future, (and most likely imaginary) wife, shouldn't be something to say to a woman you don't know, that would be weird...
As a wife I can say, if my husband said that to me I'd laugh like crazy 🤣🤣🤣 but I'm goofy
As a pick up line? Horrible.
As a line to tell someone you’re already with? Adorable.
I told my wife what you said to tell her, and she said “Thank you...? That...sort of made my day?” 👍
That's what I'm talkin about, David! :D
I literally just stopped what I was doing and gasped! CRAFSON!
Subtitles be like:
"I am your host...
...the crab man."
Crab man sus
@@foragingadventures Hey Crabman!
I just cracked up
Just like in Dark Souls, IS CRAB TIME
I actually had to pause the video to give myself time to react to Crafson. How... {*Crafsman head shake*} adorable.
It's like, one quarter of an Indian head bob lol.
This video popped up in my recommended and the vibes this guy is giving is a sweet old grandpa who wants nothing but the best for his grandchildren.
The look of betrayal when crafson shook his head NO b4 he said yes. 🤣😂 had me rolling
Crafsman: The mica powder brushed onto the mold may rub off and get everywhere after handling the finished piece. To prevent this, you can coat the metallic mica visor with something called Psycho Paint after demolding. It's glossy, clear, won't affect the color, and is super easy to apply!
It has held up pretty well. I've found that if you make it too clumpy, that outer bit of mica can indeed rub off. I got some Psycho Paint years ago for painting color onto stop-motion puppets, but have never considered using it as a coating! Fabulous idea! Thank you!
@@TheCrafsMan Awesome!!!!
I do be liking these dreamy colorful backgrounds but nothing beats the good old messy workshop!
Crafsman: "One day, all this gon' to be yours to take over."
Crafson: *sus*
"for me, that's not the final frontier." I see you, CrafsMan.
Why is this so relaxing to watch-
Your little space montage with the figure was so cute and made me so happy
I laughed and chuckled when little Crafson popped up. He takes after his Father....you should be proud.
The crafsman truly is the bob ross of our generation. His voice makes me feel safe and happy. Thank you, the crafsman
THANK YOU! I knew I was getting vibes but couldn't place it. That's exactly it!
Crafsman is our new Bob Ross.
Yup
I feel like this gentleman is the Bob Ross of the nifty figurine creation world.
Yup
Crafson is so cute. He did an amazing job on the sculpt! These are so cute/cool.
Among us crewmates and recycled silicone? You been spying on my stuff again, Crafsman?!
Just kidding. This little guy turned out so great! Crafson has some skills!
Gear Grinder! :D :D :D :D :D Mannn, when I saw your Instagram posts last week with the little Among Us guy, I said "Ohhhhh man..." It reminded me of when I did the Hydro-Dipping episode that came out right after someone else's.
But I'm so slowpoke that I'd been working on it for a week. This video had more preparation than my average ones due to the addition of my lil buddy. I'm for real encouraging him to take over. :D
@@TheCrafsMan I've got another video that I probably could have had done sooner too, but it's no race. I'm just flattered as heck that you even noticed my stuff. You've been a huge inspiration for getting me to work harder and force myself to sharpen my skills.
And it would be super awesome to see what crafson can do!
Squishy molds!
@Jon Mon it is? Unless there’s another I don’t know about.
@Jon Mon more like uncle Joey
Crafsman... you have the best workspace ever and is DEFINITELY film worthy. I’ve been watching your channel for a long time and you are the only channel that’s gotten me through school. So thank you kindly.
Jordan, this is super kind and super encouraging to me. THANK YOU, so much!
Thank you for giving me and the Crafsman community the best quality videos and keep on steadycraftin
For smoother sprues without nicks that slash into the mold body:
Take a long skinny scalpel blade, heat it in a flame and bend it sideways into a u-shape when it glows. It forms a kind of 'crooked knife', kind of like a gouge with the handle turned ninety degrees. Use the U to cut smooth bottomed ribbons of rubber out of the way. Gets dull quickly, but blades are cheap.
Oh gosh I just got to the part where you mentioned me and had a small happy heart attack 😭😂 Spaaaaace!
This is such a fun game.
OH MY GOODNESS HELLO CRAFSSON
Your artwork is really amazing!! Great job! :)
moniemonie48 Thanks! ☺️🥰
@@StudioHannah Your channel is amazing, too! New subscriber!
Your artwork is awesome thanks for sharing it with the channel!
Hannah, I'm so glad you liked that! Thank you for sharing your art!
Nice collab between father and son....CrafsSon’s cute, little face and hand...awww!
I was thinking maybe he could show us how to do multiple colors in a single mold... then at 13:30 he does exactly that.
Glad to read this! :D There are other techniques as well, apart from mica powders. You can even pour a solid color into a separate cavity (like the visor spot), let cure, and pour the rest of the figure. The parts will stick together very well and be a solid unit. (You can do this with resin, but try to time it where the first part isn't 100% cured, so you get that thermal fusion going.) :)
@@TheCrafsMan does the mica stay in place if you pour from the"feet" rather than each side and squash it together? Or will the mica migrate?
@@tonilarimore6079 It actually sticks to the mold fairly well. If there are any caked up parts, that may sorta fall down if the mold is bumped a lot during the pour. But in my experience, an even layer clings to the silicone well.
Your voice is absolutely hypnotic. I love the accent and the cadence and the tone, you really are the Bob Ross of crafting!!
Crafsson is adorable 😁
14:14 that "but you ain't got to do that" was very comforting 😌
I dunno crafsman, crafson kinda sus. I saw him discombobulate your star wars action figures and vent to Fred's™ Dollar Store.
HAHAHA! We enjoyed this comment! :D
@@TheCrafsMan Hope you and your family have a blessed sunday crafsman. Keep steady craftin!
Did he use his coupons and get a lightsaber?
@@HollywoodColt Do what? Coupons belong to Dark Vader.
Oh man. When you made it fly through the space background I had a good laugh. You ready have an excellent sense of humor.
Also, Crafson looks just like ya. Glad to see he's taken a shine to steady craftin.
Oh, dear, I am delighted again, since TH-cam stoped e-mail notifications I lost you, I hope not anymore, this is delicious to watch, I was very happy to meet your son!
WAAAIIIIITTTT what! So happy to see Crafsson around the 1:30 mark! Now back to the show!
I love TheCrafsSon. That's the most adorable Man/Son duo I've seen in a long time!
OH MY GOODNESS GRACIOUS, CRAFT SON IS ADORABLE!
0:00 - 0:24 I love this intro!
9:54 You add objects into the liquid to increase the coverage! Smart Move!
16:38 Red was not the imposter. You have 2 imposters remaining.
17:10 He's shaking his head ever so slightly broadcasting "No, I don't, pa..."
17:36 That's pretty slick! I like that one.
Love you guys
"for me, that's not the final frontier" Crafsman goes beyond space and time, it's proven now
Honestly, I need a 1-hour video of him just talking.
Agreed
The silicone pouring scene had a great aesthetic. You are not just a great figure creator but also really good at making these videos. Much love, your voice always reminds me of Mitch Hedberg.
This is my first video from your channel, and I don't think I've clicked subscribe so fast before. I love everything about your channel so far!
You speak so calm and quietly its super satisfying to listen to,
I'm telling you Mr. The Crafsman, your music is amazing. I really wish you'd look into "Distro Kid" and get yourself the ability to post stuff on Spotify! Man... Love it! Thanks for the video.
My man, thank you! :D I sincerely appreciate your encouragement. I post MP3s to Patreon every now and then, but feel like I'd need some more substance to the songs to be worthy of Spotify and that. But thank you for the super kind words!
@@TheCrafsMan Sir, Your collection would really be appreciated by those of us that are in the car on long drives or just need a back drop of sound for different things that are going on during the day. I could see your music being even bigger than your Crafs stuff as it really is kind of what I'm here for. I enjoy the videos for sure, I really do; but I'm not a crafter. I think this just speaks volumes to your musics wide appeal and well to your overall appeal.
Nonetheless, as always, I'm proud and honored that you'd take time out to reply. Thank you very much. Sincerely, Trae McCombs (S1cnus on reddit)
Your voice is oddly relaxing
That first pour was amazing.
i love your calm approach to TH-cam
Brilliant video as always. Smooth-On should feature your videos. They are very fun to watch and easy to follow. Maybe as a follow up video you should use this same mold and make a split body with a harder plastic bone embedded in the middle!
i stumbled upon this channel and its perfectly balanced with art and wierd. I LOVE IT
The world needs more Crafsman!
This is one of the only DIY channels i've seen with a unique identity and IM LOVIN IT
Your voice is so calming
This guy never fails to entertain in his demos
This is now my favorite crafts channel, so relaxing. It has something of ASMR Unintelligible whispers and I love it.
I cannot stop smiling when I watch crafsman. No matter how many comments I see about how great he is, I still feel more could could be said. He's captured the perfect cozy-feeling of an independent creator with tremendous quality and effort. May he continue to flourish.
i’m new and i jus gotta say this the most calming voice i’ve ever heard and i love that it’s not asmr
Crafsman you're better than prime time television 📺
this is the most wholesome thing I've ever seen
OH YEAH! Back to the basics! I miss this type of video!
You really brightened up my day, Crafsman
Crafsman went crazy flipping those molds together like that haha. I wouldn’t have the nerve to do something like that. But crafson appearance had me rollin. So cute haha
Watching your videos encourage me
Crafsson is so CUTE !!!
This is some of the best content ever, thank you.
Welcome Crafsson!
I love that crafson is involved!
Man I dig this channel. So chill.
Thanks to all that support this creator I appreciate it. Y'all are good people in my book.
A treasure.
I get so happy when there is a new video posted.
Your voice is so relaxing like Im trying not to fall asleep with how amazingly smooth it is
Also great job with the squishy!! Its amazing!!!
I honestly couldn't pay that much attention because his voice was so smooth
Hey CrafsMan, another great video. The construction paper backgrounds are neat and I like them a lot. But I kind of miss the workshop, I think it has a lot of character and makes the crafts look a little more accessible when you don't have a fancy background.
The voice makes me laugh every single time hehe and the way he pronounces those freaking words I love this channel and the amazing crafts that this dude makes are so good .
Welcome to the club.
I had a friend in elementary school that talked like him and his mother too. The one word that always made me laugh when they talked was when they said the letter “R”. They pronounced like “ are-a”; rrr-aaaa.
Lol!!!
❤️💪🏼👊🏼👍🏻👍🏻
@@wolfparty4234 hehe it must of been hard not to laugh in front of them
@@arigvi101 thanks dude
Gracefully AND indiscriminately, that's a trick right there.
Woops forgot to add sophisticated precision, too.
Thanks for the flirting tip on the Webster's, gonna see how that works.
Update: it worked pretty well, although the Mrs did roll her eyes a bit, first.
Awwwwwww! I’ve never seen Crafsson before!
17:20..... I cannot tell you why this brought be such joy!
this guys voice is so nice and his words are so kind 🥺🥺
I love the construction paper background production values! You're as good as This old Tony as a maker and content creator!
Thank you Crafsman. I always appreciate you takin the time to make these. You are my hero. I mean that.
This dude has the most relaxing voice ever 😊
When I watched the intro I immediately subbed 😂😂😂
I work with casting silicone and I highly recommend using MANN 200 as a release agent. It releases way easier and it will prolong the life of your molds.
I love the puppet. it's like a hammerhead shark's idea of what a human looks like
Crafsman, your videos are always so positive and peaceful. Blessings on you and your family.
Videos are getting better and better all the time; new music sounds great in this one!
You are the epitome of relaxation and mellow ...
Can we just pause a reflect on how far crafsman music has come. Honestly he should start making soundtracks and releasing them or make soundtracks for video games and short movies. Your so talented crafsman. 😁
GASP! Crafson finally shows up! That's adorable XD
Also I ordered my first mica powder pigments for resin this weekend! I'll be using them in UV resin and two-part epoxy resin for various projects, so it's good to know about adding it to one half of the epoxy stuff instead of both.
I cannot understand a single word you are saying but I love you with my whole heart
You're like bob ross
Craft son is so cute as a puppet
Hey Crafsman, you can put a couple lengths of dowel into your sculpting medium before making the mold and avoid all that mess of cutting vents into it. It also makes the mold look a little nicer for if you ever want to make duplicate molds.
I love how much craftsson had to say
I am finding this process mesmerising