"BONKERS" | My LONGEST video yet. | Making Silicone Character Molds
ฝัง
- เผยแพร่เมื่อ 15 ธ.ค. 2019
- Mannn, I had a time making molds of this larger version of "AGUA".
I expected this to be EASY, but I ran into problems, and I document what it took for me to finally get production molds.
Also in this video: Header card design, DIY space character in progress, LUMECUBE LED light review, silicone mold venting techniques, and more.
3D Scanning by ArtLab 3D:
www.artlab3dprinting.com/stor...
TIP JAR
paypal.me/steadycraftin
PATREON
/ steadycraftin
MERCH
shop.crafnation.com/
FACEBOOK
/ thecrafsman
INSTAGRAM
@steadycraftin
MATERIALS USED: *
Mold Star 15 Slow Silicone
amzn.to/2EpxzpU
Mold Max 40 Silicone
amzn.to/35t2Dkv
Krylon Acrylic Sealer
amzn.to/2RXhqQw
Smooth-Cast 65d resin
amzn.to/2rKgq7M
Smooth-Cast 45d resin (translucent)
amzn.to/2M3rC6b
NOTE: When making silicone molds of 3D prints, some print resins inhibit the cure of silicone, as shown in this video. I got Mold Star to work with my 3D print after it was sealed with the acrylic spray. But Mold Max, being tin-cure silicone, worked even without the sealer. The tradeoff is tin-cure molds don't have as long a life, and this particular one isn't as flexible.
AFFILIATE LINK NOTICE
“As an Amazon Associate I earn from qualifying purchases.” - บันเทิง
Steady Craftin videos are made with the help of DIRECT SUPPORT:
www.patreon.com/steadycraftin
(You'll also get access to the printable 3D scans of my original sculpted figures, MP3s, exclusive behind-the-scenes videos, shop discounts, and more.)
My family and I are so grateful that I get to do this.
BOOM SHAKALAKS … ok
I love how in his intro he says “crafsman” like it’s some mystical force of magic, this channel is truly a gem
It is a mystical force of magic.
He should add the "OOOOOO YEAH!" sound effect in, like he use to do for mod podge. LOL
@@MindVomit ;) I break out those vocals eeeevery now and then. You got me thinking about using them more, though! :D
My favorite was "stainless steeeeel"...in the etching video😂
@@TheCrafsMan Please do
Some summarizationary tips for anyone interested in making molds from 3D prints:
- These molds failed: Un-sealed 3D printed object, and primer-coated 3D printed object (even after sealing).
- Some suggest the molds didn't sit long enough to cure. This is not the case. These 4-hour cure silicone molds were left overnight.
With silicone inhibition, it would be goopy-galoppy like that indefinitely.
- I was able to get a successful mold once I sealed the 3D print with an acrylic spray.
- Some are saying to use specifically "Krylon Crystal Clear", but "Krylon ColorMaster Acrylic Crystal Clear" worked for me, as shown.
However, I advise going with "Krylon Crystal Clear", as it sounds like it's the go-to for most people.
- The 3D object that was sprayed with primer (Rustoleum 2x matte white) and THEN sealed with clear acrylic did NOT cure.
(Could be inhibition from a chemical in the primer spray.)
- I WAS able to get a mold of the primer-sprayed version using tin-cure silicone (Mold Max 40).
- Lastly, it depends on the 3D print resin. For example, I made the "SC" button molds from unsealed Anycubic Translucent Green. But objects printed using Elegoo Gray resin require a sealer.
Hope this helps someone else!
Can you pin this comment to stay at the top?
Thanks again great knowledge base thanks for sharing this.
So to clarify: the model printed in Elegoo Gray and sealed *only* with the Krylon clear sealer, did not seem to inhibit the platinum silicone? Because if that works, I could switch from tin to platinum silicone for my molds, and that would be really nice. (Platinum inhibited badly on every test I've done with 3D resin printed parts.)
I'm glad you showed your mistakes. Thank you. But this video did have me feeling frustrated for you
*BREAKTHROUGH*
For those who can be interested, I just found out (after some science and trial and error) a way to make platinum cure mold (MoldStar 15) from resin 3D printed object (Elegoo Mars) without using any sealer or special product.
The final results will probably be posted on the Crafters of the Universe Facebook group.
In short, based on what I have learned at this time, it is required to let the 3D printed item rest for about a day after the UV post-cure (there is probably some plastic offgasing occuring, imparing the silicone cure). Afterward, I clean my printed object with acetone, let them dry some time and then were ready to pour the silicone as per prescribed.
PS: I use Elegoo waterwashable resin which also caused me the same issues seen in this video at first.
First time viewer and I clicked this by mistake. Best non-decision *_ever_*
aurtura pal! That happened to me about 10 videos ago. I was hooked instantly.
Welcome friend!
same here havent looked back best mistake ever
Mannn, I appreciate y'all giving my videos a chance.
I end up liking subscribing and then watching him like religion
"That's what they call extremely disappointing right there"
I love that Crafsman doesnt get upset, I could fall asleep listening to his calm voice. Reminds me so much of Bob Ross
DahL Partz *Brandy yeah you could feel the sting
how we respond to failure is an indicator of the quality of our character. your's is top notch.
Sometimes you just gotta try again.
Though the righteous fall 7 times he gets up
Like the red state end run going on right now with 17 states attorney generals. No wonder I'm here.
@@sclogse1 a random person posting about politics on an arts and crafts channel is as petty as it can get and could only devalue your opinion. once mainstream media stops talking about US politics i guarantee you're going to stop caring.
"That little boom shaka laca right there" Never change CrafsMan, never change.
LOL! Thanks, buddy! I don't recall where I got that from, but it may have been NBA Jam.
@@TheCrafsMan He's heating up!
@@TheCrafsMan He's on FIRE!!!
YESSS!!!!! Y'all took me back a few short years with this. :)
Hey baaaaaby
When steady craftin, remember the two P's: persistence and patience.
chwen hoou don’t forget: pre-apocalyptic, and post-apocalyptic
Persistance, patience, and perseverance.
This channel is a hidden treasure in the depths of TH-cam. Crafsman, you have won my undying loyalty in less than 24 hours.
Commenting to lend some algorithm weight, and to say I'm looking forward to sitting back and relaxing with some tea and watching this one!
Thank you!
Done and done. Pique Tea Crystals: Organic Mint Green, then Numi: Golden Chai.
If you ever make a Crafsman sticker about not having a microwave let us know. I got a water bottle that needs one.
I second this motion. I don't know why, but the running gag about the microwave makes me so happy.
I just hope it doesn’t fall apart, with a litany of microwave donations showing up on the CrafsMan household’s door step...
@@freshoutofcrabs Yes! And especially the way the camera cuts to him, along with the dramatic music every time.
Crafsman he just the best. Would love to see him do some more metal casting - bronze, silver or even gold into lost wax, for sure. Maybe try making a wax positive for reproduction using plaster and mold wax. Mmmm love me some Tonys and some slap yo mammas seasonings, especially in my Gumbo. You know whats wicked cheap to create your first positive for wax - dental alginate - cast your 3d print into aliginate, remove the print, pour in your jewellers wax, then make your silicone mold off the wax positive - super cheap - like Justin Wilson say,
- I gar-on-tee! Or if you 3D resing printing for some fine detail - print the mold instead of printing the positive - got to be a way to do that
👍
I agree, more metal casting would be cool!
I have a program to 3d print the negative of an object, aka the mold. I usually print in TPU silicone filament.
"And eventually they had to close down the store."
SixDeuces I lost it when he told that story!
That's a RIP in the chat
1 week: "might be scaling things back cause, you know..."
2 week: "longest video eva"
Hahaha! Yessir! ;)
Mr Crafsman, you’re my greatest inspiration, keep on being such a nice person
Wow. That is a bigtime compliment. Thank you so much.
I mixed up your names and read Dr. Crafsman... I think I like that idea
Oh also, if you made a mold of your stirring stick and sold resin copies of the stick, I would absolutely buy one and use it whenever I mix my silicone.
Totally!
His goals are beyond our understanding
Bonkers used to be my favorite candy. No one remembers them, even though they had a whole series of great commercials when I was a kid.
GLAD to hear from someone else who remembers! Mannnnnnn I used to like those things! :D
@@TheCrafsMan I remember having saved a stack of the old wrappers (these were similar'ish to starburst for those too young to experienced bonkers candy), but at some point they were lost.
I'm excited to be one of the legendary chosen ones who received a reply from the CrafsMan himself! :D Yay!
Crafsmans a dad? Lucky kid.
I can't be the only person that came here looking for DIY stuff and stayed for the warmth, the smart and funny chat, and the just all-round loveliness. As well as the steady craftin', obviously.
Very kind, Mark. Thank you.
The Crafsman is like a cross between Bob Ross and Adam Savage, with a healthy dose of southern hospitality thrown in.
I'm going to be able to print and mold figurines and action figures for patrons because of you. Thank you kindly for everything you're teaching.
Also, that specific Pilot Precise is my favorite pen in the world.
Yes 100% best pen for sketching or smooth jottin'
fancy seeing you here. :)
i love how a lot of the video is him rambling about various things like DLC and the original free range chicken. don’t change a bit man. love it.
33:17 I laughed SO hard at that "fo real tho .." I almost choked on my food. Crafsman you hella funny.
I am definitely watching this one again.
"I'll just watch a few minutes of this"
*43 minutes later*
Same!
Crafsman, you got big Mr. Rogers and Bob Ross energy. I really dig your stuff, keep on steady craftin!
"Some people think I'm bonkers,
but I just think I'm free,
Man, I'm just livin' my life
There's nothin' crazy about me"
My mom has a friend from Louisiana that told me about Tony’s about 8 years ago. Life (and most any food you can think of) has never been more delicious since that introduction! Greetings from California and keep on steady craftin’ CrafsMan
crafsman feels like the bob Ross of crafts
You are soo correct!!
Bob Ross is the crafsman of painting
Crafsman, moving forward, you could make every episode 40+ min. I will watch and enjoy everyone.
Thank you Crafsman - your "failures" are more interesting and enlightening than most people's successes. Keep On Keepin' On sir! :)
Found this channel by accident. Now it’s my favorite.
You are a savior, action figures arent cheap, but buying one and casting it is more cheap
35:03
"We about to call in the reinforcements."
*summons big stick*
"Ah Snap!"
43 whole minutes i got me a bargain today. 4 videos for the price of one!! Thanks Crafsman!
As someone from South Louisiana, I appreciate crafsman sharing the amazingness that is Tony's with the world.
Every well-stocked kitchen should have some Tony's! Love dat stuff!
Oh man, I laughed so hard at the tablecloth trick. 10/10
Dear Crafsman, Thank you for inspiring me to keep on keeping on. I've been watching your videos while I do my thesis in grad school and whenever I wanna quit, I got you crafting by my side, reminds me that I got to keep going. Also started to do clay craft as well from your chicken episode. thank you!
Thank you so much. This is really encouraging to me.
Crafsman, every time I mess up on something and have to fix it, I decided to view it as getting an opportunity to gain new skills. I call it leveling up... and you definitely did here!!
Crafsman eats a lotta sour cream
He must be ukrainian.
Wonderman I’m Ukrainian!
@@BlackMagicCraftOfficial Me too LOL!
When I saw those two big containers I was like "This guy's alright."
"that belongs to you, a gift from me"
Crafsman, that was beautiful.
I don’t understand why Crafsman’s voice is so relaxing. For which ever reason it is, I’m grateful I found this channel and can just chill.
“Craftman does not own a microwave”
I don’t know why that got me so well
I got sooo excited for you when the mold worked. Then the angelic music showing it off, I lost it. Great Job, Crafsman!
Your voice is so calm and soothing. It’s like an older wiser person teaching a younger person. I love these videos.
I am beyond happy I found this channel months ago. Every video you post is a lovely, relaxing and interesting break from my rough life.
Your like a modern Bob Ross, Craftsman. Never change and thank you for all that you do.
We couldn’t love you any more than we already do, sir 💙💙💙. You can make even all that trial and error seem like a spiritual journey.
That angelic music turnaround for the test cast was even better when you remember it's happening in a trash can.
Agua was always my favorite sculpt! I like fish, amphibians, and reptiles and the lines on it are very clean. Hopefully I'll be able to buy one!
I used to face lots of “tributaries”as a picture framer. I always told my coworkers this is how we learn what not to do. I am thoroughly enjoying your videos. I just found you in March of 2023. I have been binge watching and laughing today. Blessings to you and yours.
intro is how every artist works
This is really wonderful video. Thanks for sharing your learning experience with us. Every mold maker has a chapter in their biography titled "Curing Inhibition". I've had my share, especially with Mold Star 15. Great solution! =)
Doesn't matter how down, how stressed, how anxious I am, of which right now, I am all three... you always... always make me laugh.
Thank you :)
I keep hearing the word “production”
That sounds very exciting.
your patience, precision and personality are top notch!
43+ minutes of relaxation 😌
It's never a waste if you learn a valuable lesson from it..love the twig stir stick...lol
I remember Bonkers. I am grateful I grew up in the same era as the Crafsman-every video is packed full of shared memories.
Crafsman really has saved my life.
Thank you Craftsman for sharing your creativity, passion and time with us. You have a grand community of people who appreciate you very much!
I'm grateful for y'all! Thank you so much.
"What in the world is this man doing?" 😂😂
Love that you show both errors and successes
"What was I talkin' about?"
I don't know, man. I was just enjoying your soothing tone and forgetting my troubles for a minute
43 minutes of Crafsman!! Oh, Christmas has come early!!
The more I learn about the crafsman the more of a mystery he becomes...
I love how it kept coming back to “42”, I was anticipating a Hitchhiker’s Guide reference. 42 = everything, meaning of life = crafsman
TheCrafsMan SteadyCraftin knocking it out of the park once again. Thank you so much for your patience and encouragement. NY loves you!
Dude! My girl just threw out her Blockbuster membership card today. It seems like yesterday that video stores just opened up. Now they're history!
When I saw the stick I thought “primitive crafs technology - mixing sticknicity”
Oh Crafsman!!! That VHS Store story is hilarious. Thanks for sharing.
I've been binge-watching some lately and still have to say. Crafsman, you're one of the best edutainment channels on here.
This week on SteadyCraftin, Groot drops by to lend a hand mixing the silicone for the molds.
You made me snort my Irish coffee out my nose! 🤪
"later he had to close down the store...." That's one of the best stories he's ever told on here
I'm not interested in ever casting with resin, but I love watching your videos... I'm completely invested, ha ha, in seeing you get the perfect cast. 👍😍
It's so cool that this video shows the early conception of what would become the pocketnaut. Obviously it's changed a lot but that's how the process of creation goes. But it's so neat seeing the whole history of the worlds itty bittiest space explorer
I really love the informal yet nicely edited style you have going, Im only 15 mins in and have laughed a few times with your glove malfunctions! Makes me smile, thanks Crafsman!
So glad to hear it! Thank you for watching!
Crafsman, you should try a video on swirling/marbling multiple colors in resin casts. I've been trying to recast old plastic army men toys from the 1960s and 70s. These videos are the best on youtube for this kind of thing! Keep up the awesome work!
There's the Crafsman up in here given' us the best life lessons. Never give up, just keep on crafsin on
My NEW FAVORITE CHANNEL!! LOVE THIS WONDERFUL GENTELMAN!!!!
5:35 "dlc? Sounds like a sandwich to me" 😂 I love this channel so much
"das my gluv."
Thank you for sharing all this. A lot of tricks and knowledge in craftsmanship tend to stay secret when people are trying to get one up on their competition. You're treating the world like a friend, and I appreciate that a lot.
Only half way in, but just want to say I am watching this just before I go to sleep for my late night shift job. Don't worry, I'm turning in early. (or at least trying to!) Love the video so far, always appreciate people showing the problems they encounter, helps show the learning process. Thanks Crafsman!
Gordon, this means a lot to me.
0:50 definitely made me laugh.
"Look at dis" 😂😂😂
:D Glad y'all enjoyed it!
Catching up with all your videos, and this one, so far, is the funniest I have watched from you xD. Great job!
I have been searching the video where Crafsman says he has no microwave and this is it! The sticker makes much more sense, haha!
I've been doing molds and casting for a decade and continue to learn new things from the Crafman. Keep steady craftin good sir!
that was a fast 43 minutes.
almost 400 views and no dislikes. you’re doing it right crafsman
Too bad the haters gotta come.
4 accidental dislikes at this point.
7 with 28,000 people who have channels nobody watch.
One person saw your comment and wanted to ruin the fun.
They are not viewers. They are other people with channels nobody watch!,
Voice so smooth, he could talk a baby crawfish tail out of its shell. Keep on steady craftin.
I love that you share your craft with your children! When you made that figure with your son too, that was so cute. I love coming to my parents for ideas when I'm creating.
"When-When". A new classic. I dig it.
Awesome a long video. The amount of editing you must do is crazy, always comes out great though.
Thank you so much!
Seeing you troubleshoot when things don't go right is really helpful to learn. This wasn't too much detail at all, it was great!
I keep coming back. You are the Tabitha of the craft world. Much love.
When life gives you problems:
Bob and weave
Mahalo for you, brother. You’re by far my favorite “TH-camr.” Big kine inspirational.
“Old school 3D software”
Yo! You just unlocked a memory ! I first used TrueSpace in the 90’s!❤❤
I had so many emotions watching this one! I'm so happy your molds finally worked out in the end. 🤗
Crafsman, you creative genius astounded me the entire time
Mr. Biscuit, this is really encouraging to me! Also, I am a big fan of you!
@@TheCrafsMan thank you, keep up the steady craftin
I like that you show the failures. That's part of the creation process.
Absolutely love your videos! The calmnicity and the jokes. I'm more than ok watching 45 minutes of Crafsman.