Ford 1920 Tractor 3 Point Lift Bouncing, Hydraulic Problem / Fixed

My tractors 3 point lift bounces when it has an implement on it. This video shows how to fix this problem by replacing the hydraulic piston seal. The piston seal can be replaced by removing the flow control valve cylinder head assembly located underneath the tractor seat.
Piston Seal P/N - SBA050309017 - www.messicks.com/part/sba0503...
O-Ring P/N - SBA052310750 - www.messicks.com/part/sba0523...
How to Install a hydraulic piston seal - • How to INSTALLING PIST...
Video of 3 point lift bouncing - • L2950 3 Point Hydrauli...

[@leonsuggate3478]

Very helpfull - ive bought a 1920 with 800 genuine hours and its 3pl is bouncing with a load on it , so am just about to embalk on doung the same check now .

[@horsecrazyinala]

Your video inspired me to buy the seal and the O rings and give it a try. I have a 1910 model made in 1983. There was almost nothing left of the seal, but all of the O rings still looked great. It was an easy cheap fix for a nagging problem. Thank you so much!!

[@ryanfairclough3394]

Thank you! I have two 1320s and have been afraid to do anything hydraulic related until now. I will be subscribing and checking out the rest of your videos.👍🤝

[@craighatch3221]

Just wanted to say thank you for sharing. You did a great job.

[@timbarbee9421]

Excellent video. Now I can fix my nh 1720. I call her bouncing Betty.

[@stevetrachsel8690]

Well I finally got the seal on the piston! It went back together smoothly after that! Works well now. Thanks for your help.

[@snurb48]

This was a fantastic video, not one second of "oh for crying out loud.....do we have to watch this guy wash all the parts, etc.". YOu know what I mean. I know this is three years late but would a 'shuddering' as the three point is adjusted when box blading be of the same issue? This old 94 Honda 6522 I picked up runs and operates perfect with the exception of not being very smooth on 'creeping' the 3pt. stick on the fly. So the best I can do to explain the lack of response from stick to action of implement makes for a headache grading a road smooth!

[@uneasyrider6533]

I have a 1320 with the same problem. I really appreciate this man!

[@stevetrachsel8690]

Great video. I appreciate you doing this as I have same problem. Now I’m ready to tear into this! Thanks

[@nascar88ford]

Thank you for the video. My New Holland TC35a just started doing this. Thankful it's not an impossible job.

[@troyadams3079]

Thanks for the video. I have a 1720 with the same issue

[@justinkaercher2677]

Thanks for including the part numbers I just ordered my seal.

[@soliverdelafuente438]

Nice one paps.

[@TaitGuy]

Thanks, Ted! Good info! ~ D

[@jasonbradley7973]

I guess I am going to do this pretty quick. I have a 1920 purchased by my dad in 1990. The lift just started to hiccup. I will replace the hydraulic filter first to see if that is the issue. This is the only issue this tractor has ever had.

[@ralphbarrs6622]

Please do a video on detaching the front loader. A friend has a 1920 and need to remove the loader. THANKS!

[@joeleroy1857]

Would that be the same sealnas a ford 1700?

[@jacobnabors1268]

do you know if the 1520 has the same size oil seal?

[@robertwilliams5573]

having trouble kicking out of 3rd gear at full throttle with piece of equipment attached. It does not grind putting in gear or taking it out. It has only 1100 hundred hours on it. what could cause this?

[@danlevesque589]

Great info but just wandering if the bucket attachment also doing the same or was it only the 3 point hitch? Thanks in advance.