Bro this is a great video! Thanks, I've been a little hesitant about tackling my injectors and O rings but it's really not so bad and I'll definitely clean the injectors using this method while I'm at it too.
Just want to let you know you’re doing a great job you need more recognition honestly I just bought my 2004 325ci and I watched all of your videos so I can make the most of my car
Nice video and hot locking e46 ,my son just his 2003 e46 330i it was missing fuel pump we order Bosch pump and installed but car been setting over the year and fuel got old and before fuel replacement he rebuild venos seals but not change needle bearing and it got some type of knock I don't know if it related to vanos or not please rich out my name is Josh thank you and best regards .
Hi, I have a 2004 330Ci. It is leaking fuel from the injectors only at below freezing temperatures. It always starts/runs perfect and doesn’t leak at normal temps. Is it worth replacing o rings? Or are ‘04 injectors known to leak from the injector body when freezing? If I have to replace injectors do you have to calibrate? Thank you for any recommendations/advice
Fuuuuucc, thank you so much… every time I had a problem, I would fix it, but I had to sell.. still have my 328ix drive.. still working on mine in the heat..🥵, but I love winter..Man where are you and where can I get your jacket 😳😍
Its called a Schrader valve.
Bro this is a great video! Thanks, I've been a little hesitant about tackling my injectors and O rings but it's really not so bad and I'll definitely clean the injectors using this method while I'm at it too.
So what could go wrong... electricity and flamible cleaner.... sounds safe to me!
Good video, I like the trick with valve stem.
gotta be careful!
Just want to let you know you’re doing a great job you need more recognition honestly I just bought my 2004 325ci and I watched all of your videos so I can make the most of my car
Thanks bro, I have the same issue and you just made life easier for me.
No idea why you have that amount of subscribers.. your videos are great man keep do what you do thanks bro!
Great video, I used alligator clips to connect to the injector terminals, make sure you tape them to prevent touching. Keep up the good work.
Nice video and hot locking e46 ,my son just his 2003 e46 330i it was missing fuel pump we order Bosch pump and installed but car been setting over the year and fuel got old and before fuel replacement he rebuild venos seals but not change needle bearing and it got some type of knock I don't know if it related to vanos or not please rich out my name is Josh thank you and best regards .
Hi, I have a 2004 330Ci. It is leaking fuel from the injectors only at below freezing temperatures. It always starts/runs perfect and doesn’t leak at normal temps. Is it worth replacing o rings? Or are ‘04 injectors known to leak from the injector body when freezing?
If I have to replace injectors do you have to calibrate? Thank you for any recommendations/advice
I want to use brake cleaner, do you think it is better internally?
I heard carb cleaner does a better job
Fuuuuucc, thank you so much… every time I had a problem, I would fix it, but I had to sell.. still have my 328ix drive.. still working on mine in the heat..🥵, but I love winter..Man where are you and where can I get your jacket 😳😍
Its a jacket i got from work, work at BMW
Hey broo, the pressure of the carb cleaners can is blowing off the injector from the tire valve thing, any suggestions?
Great video. But pls knock the music off or lower the volume right down.
very good Thankyou very much !
Did the cleaning get rid of the lean codes?
In most cases it wouldnt unless the injector is heavily clogged
How much horsepower does the wing spoiler add?
Approximately -4
Thank you for your video. Smart bro!
100% use alligator clips at the injectors, I shorted one and it cooked it internally.
What kind of cables can I use to wire to the battery of my e46 in order to power the injectors?
Any sort of electrical wiring should work
Nice video tutorial, but that cabin air filter looks gross! Time to buy a new one, my dude! ❤
Thanks homie, its a charcoal air filter they typically that color haha
@@_mrklein Ahh, I stand corrected then. 😅😅
That music making it hard to hear you
Well done
How do you feel about using throttle body cleaner to flush the injector with your method?
could work, carb cleaner tends to be stronger for gunk and debris removal
Anyone take notice how much new genuine bmw injectors cost? 🤯
Exactly why I did this😂
this video was good but this music sucks
I can’t get the thingy out of the damn valve I’ve been trying to for hours 😂
Where do you get that tire valve thingy to slip ontop of the injector?
Any mechanic shop should have it, if you have a buddy at one they’ll usually just give it for free.