AlphaRex Tundra/Sequoia LUXX LED Headlights Install & Review | 2007-2013 Toyota 08-17 Tundra Sequoia
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- View All AlphaRex Lights for the 07-13 Toyota Tundra►bit.ly/39bTH9Y
Today I will show you how to replace and install new headlights on your 2007-2013 Toyota tundra nd 2008-2017 Toyota Sequioa, with the Toyota Tundra LUXX Series LED Headlights from AlphaRex.
★Coupon Codes★
Code: HARLEY - 5% off at TheYotaGarage► bit.ly/3nMBpPc
#alpharex #toyotatundra #2ndGenTundra
0:00 AlphaRex Toyota Tudnra LUXX LED Headlights Overview
01:10 How to Install LED Headlights on Tundra
02:24 AlphaRex DRL Wiring Explained/How-To
05:25 How to adjust AlphaRex Headlights
6:30 How to remove/replace headlights on Toyota Tundra
11:10 AlphaRex LED Vs OEM Headlights Light Comparison - ยานยนต์และพาหนะ
Thanks for the info… now is my turn to get my tundra looking fresh…the lights are primo
Is there any way to wire the drls so they're always at full power?
How do you do the Horizontal adjustment? I can't figure it out on mine.
Thank you, great video. I do have a question. Just bought the pro series for a ‘14 sequoia and it seems the install will be the same. When you were in the fuse box did you transfer the red 10 fuse into your new part before adding the new part to the fuse box or did you just remove the red 10 altogether? You made a comment about it but I didn’t quite follow. Also for feedback, even though it’s plug and play, would have been nice to see you connecting each wire. Thx in advance or for the video!
You add the 10A to the plug. It comes with a 5A so take the 10A out of the fuse box and plug it in next to the 5A on the plug. Then plug it into the fuse box. I, by mistake took the 5A out and just put in the 10A to the plug and my Tundra would not start up!
Can you changed the white DRLs to Amber DRLS?
Anyway to make it blink instead of the sequence light?
Yell have great videos!
Are the yellow blinker lights illuminated when the low beam is on? I installed mine, and the yellow blinker bulb is on when i have low beam on. Just wondering if that's just how they are.
What sort of equipment do you use to film with
Literally just bought these! Can you explain how to connect the connections to the battery?
For the power/ground on the DRL harness, the best way is to disconnect the little bolt on the positive (red) and sandwich the power cable in there and tighten down, for the ground (black) I always prefer to add it to the chassis with the rest of the ground wires, it will be right next battery on the chassis.
Hi, Nice video but one thing need to correct is that the black and grey plugs from the light you mentioned they need to plug together but actually they are bridging the signal plug and signal light, so you need to unplug the signal light from the plug and connect them to them to the black and grey plugs correspondingly such that you will have a running signal light.
Great info, thanks!
Do these lights delete the auto leveling function?
If you plug the black and grey plug into each other your sequential turn signals won’t work, you need to plug the turn plug into one and put the other on the turn light
I ordered the same exact ones. Why are my lowbeans not bright white like yours?
You do plug the yellow wire into the driver's side headlight and you plug the truck blinker wire into the black and the gray plugs to the headlights the yellow wire makes its so your 4ways work when the truck is off and your drl and blinkers work when you lock it and makes the drl work as the blinker
Just installed mine. Yellow wire plugs together
@@derickponce-sanchez772 no it doesnt
@@derickponce-sanchez772 it can but it's not gonna do what its intended to
Plugging in the yellow cable turns on the “welcome home” function allowing the DRLs to sequence on when unlocked and stay on for 30ish seconds when locking the truck. At least in my experience
My high beams are not working. Any help on I can do??
What kind of grille is that ?
you seem to cover almost everything but the most important thing..are these lights compatible with auto levelling function ??
Yes they are, these have the auto leveling motors like the OEM ones which were removed.
do they cause a parasitic drain on the battery?
Hello man, I have a quick question on the drl on the headlights. I got these headlights in December and when I installed them and put them on. The drl don’t turn on during the day only at night. Do you have the same problem or if you know how to fix it? Please and thank you 🙏🏼
You will need to use the DRL harness and connect it via the ADD a fuse into the Ignition slot in your fuse box, that way the DRL's will come on as soon as you start your truck.
@@GearheadJT I put the harness of the drl to the fuse box but it only turns on whenever the sensor in the dash, marks night time and that’s when they come on with the low beams. Idk what’s wrong with the wiring
@@aldoramirez9444 u have the wrong truck
What's the part number?
Hi, where can I get the universal harness??
??
Need to see the wire hookups…. You skipped it…
Whoo, first!
So I guess I’m not the only one who enjoys removing plastic film. 😂
Had Alpharex Pros with level adjusters in a 2010 . Worst lights I ever bought. DRL's are weak to start with but after only a month the top driver side drl went super dim. Contacted them , wanted me to ship that light back and sent me a new one. New one lasted only days before the same issue. Texted with the customer support they had & went thru everything on the install to make sure there was no issue on my end. Long story short ... these are known issues with the Alpharex 2nd gen Tundra models.. Come to find out it's the boards and they stopped selling my particular model. Instead of finding a legitimate way to fix the problems & replace my lights that were under warranty still.. they wanted to send me a new circuit board to replace inside the light. I'm not that savvy. And that's what they were doing. Getting bad ones back because they had no new ones, replacing the boards and sending them back out as "new" replacements to the next guy with the same problem. Do yourself a favor, spend a few more bucks and buy Morimotos or get the OEM Sequoia leds and what's needed to fit them.
Work fine in my 2010 tundra
@@beekeeperbrad6251 what models ?
@@HPTuchin pros
@@beekeeperbrad6251 blacked out pros ? Chrome pros ? Level adjustment motors ?
@@HPTuchin pros are pros they don't have the auto motor those are the lux
Installed these on my 12 Tundra last week. The LED strips looked white and awesome. Today, since I had some time I installed the harness. Now the LED strips look "douchebag" orange/amber instead of white, wtf? Short of ripping the stupid harness out again, how can I make the LED strips light up in white rather than that stupid orange color ( I thought the purpose of the harness was to modify the intensity of the LED strips only, and NOT change it from white to orange)? Any advise would be much appreciated!
Bro I have the same problem did u get a solution on how to fix it
Another thing is your head lights bright white cuz mine looks like stock off white yellow
@@MrMikeyprats Nah, I decided to simply unplug the harness I had spent the time to install per instructions. I liked the fact that the harness install enabled the LEDs to come on as DRL's while in Auto mode, but I couldn't deal with the fact that the cool white LED's turned into douchebag amber LED's. So for now I'm stuck without DRL's which I'm cool with. Contacting Alpharex got no response whatsoever making me think they don't give a shit and don't have a fix for this crap. Sorry Bro, that's all I got. I still like the headlights a lot compared to the OEM fugly headlights but they should've made sure the LED's don't turn into that orange shit!
@Arminius wow well if I find out anything I will keep you posted I appreciate the info
Ok so they told me to unplug the grey connector from the flat black connector and connect the buld with the connector from factory together and the factory grey connector to the black flat connector if that makes sense
One of the worst headlights I’ve own. Can’t adjust for crap. DRL goes dim on one side and sometime goes out! Literally have to smack it hard for it to come back on. Light output is horrible! Spend the extra$$$ and get Morimotos..
Good cause i got NO FKN INSTRUCTIONS.
NO BLINKER? 😂
Don't put the black plug together with the grey plug they go to the factory
@Art Hansen exactly