What to do if your Glock won't fire
ฝัง
- เผยแพร่เมื่อ 8 ก.ค. 2024
- If you have taken your Glock apart, and now it's back together but won't fire when you pull the trigger, how can you disassemble it ? In this video I will show you how to safely and easily disasssemble the Glock so you can correct the problem. I am using my Glock 19, Gen 3 in this video but the information will pertain to all Glock models.
![[TH] VCT Pacific Stage 2 - Week 4 Day 3 // GEN vs TS | PRX vs ZETA](http://i.ytimg.com/vi/nspkjQuZve0/mqdefault.jpg)
I know it’s an old video but wanted to chime in and say thank you. Been building glocks for a while and haven’t come across this issue until just now. You helped me big time I appreciate it 👍🏼
crappy camera work, no shots of how he placed connector
@@Flexican1877 it only goes in one way
@@Flexican1877 bro it only goes in one way 💀💀💀
where do you buy your glock parts?? and can you teach me?
I agree with Bob BTRAVLIN, once you removed the rear slide cover, that releases the striker assembly to be pulled out. You did not have to remove the extractor depressor plunger, the extractor or the safety plunger to remove the slide.
You made my day !! I thought I was going to have to send my G5 to the factory until I viewed your video. Thanks a bunch.
Thanks for the video, I thought I was lost. Once I got the slide off, I watched your re assembly video and put my 23 back together. My problem was that the trigger was really stiff, sometimes it would get better, then it would get bad again. Soon I was having to use two hands to pull the trigger and it wouldn't break until I began to release the trigger (scary). After about two pulls like that it stopped breaking all together. After reassembly it worked but quickly began doing the same thing.
Dude you are a lifesaver, thank you so much for making this video!
Very good enjoyed it alot been building glocks for a while now. Never have done anything like this before it was awesome ty
Very good video, but there is an easier way to do this. If you pull the trigger but it won't release the firing pin (so you can't remove the slide), do the following -
1) Understand all firearm safety rules and ensure your firearm isn't loaded and that you don't have a round in the chamber
2) Pull the trigger fully to the rear and hold it there
3) The back plate of your slide has two openings - insert a very thin screwdriver (a 1/16" punch works great) into the right side (non-square) opening at a slightly upward angle.
4) Press the point of your punch down (you're pressing down on the cruciform shaped part of the trigger that releases the firing pin) and your firing pin should release, allowing you to remove your slide. Hope this helps!
or u can skip all those steps & just push the trigger bar past the firing pin safety through the Mag well & the trigger will engage
Thanks for the comments, and the humor. I am glad that I could help a fellow firearm owner out.
Can u help me with my p80 it won’t fire
Same
Thanks for the video I tough I ruined my glock but in fact I forgot to put the connector back and thanks to you I fixed the issue
Yeh thanks man better progress than i was having looking all over tha internet
What if I done all those but still won't fire? But once I clauk the slide and squeeze the trigger while pulling the slide back and it fire? What's the hiccup?
Please let me know when you get an answer
You are a life saver !!! Thank you for the video !!
Thank you. I bought a Spectre and it wouldn't disassemble. This video helped me get it to working again. Very helpful
That just happens to me I realize just now watching your video assembling and disassembling the gun for two hours thank you very much
Mine does the same thing you were talking about but it’s not that problem, if the barrel is out the firing pin will release but when the barrel is in the firing pin won’t do anything as I’m pulling the trigger....please help! Thank you
thank you dammit todays been such a bad day and you gave me a little blessing in knowledge
thanks for the video, I think my issue is the recoil rod. when i go to break down the slide from the frame it jams, and i need to use moderate force to pull it off and noted the rod where it meets the barrel is constantly off, whereas if i am gentle and assemble and disassemble the weapon while it is inverted no issues.
AFT you pull the firing pin, reinstall the slide cover keeping the extractor in place, then remove the slide as normal.
That keeps the extractor and firing pin safety assembled.
Thank you for this video. It worked on my malfunctioned G19.5 during test on different connectors.
This video saved me quite a bit of money and some face as well. Thank you!
Awesome, great video very helpful
Hello friend I'm having the same problem but the extractor is in place. My slide keeps getting stuck and the trigger doesn't go into battery. The only way the slide comes off is if I remove the firing pin. Should I change out the extractor?
My rubber sleeve is completely broken so I can’t get the back plate off how can I still disassemble this cuz I’m having this issue my Glock won’t fire
Thanks, Your The Man!!!
Good to know! Thank you and take care!
thank you so much...this is exactly what I needed!
All you have to do is remove the slide cover and it will release the slide.
It worked thank you!
I need help I still can’t figure this out I rack my gun then when I pull trigger it does the same thing it never clicks or nothing I have to pull the side up from the back for it to click what can this be I already tried pushing down the back down more nothing works
Can someone please explain the problem if you DIDN'T FORGET to install parts?
the trigger bar is the problem when this happens most of the time its not passing the firing pin safety if you look through the bottom of the mag well to the upper you can see the part im taking about on the trigger bar if that is stuck on the metal piece & not passing it then it wont fire its a bad or worn trigger bar
I agree with midnitesi. Once the striker (firing pin) is removed the slide will come off.
this video fucking saved my day omg I was so confused as to what to do and this was literally it
Ok but what if all the parts are there and it still doesn’t fire. Like it will reset but then it won’t fire at all
how does it reset if it doesnt fire? lol it cant reset until it fires
What do i do i have a g17 and i put the co2 in it and it does what this guy trigger does like when i pull it nun happens and i have co2
thank you!
I had this issue. Had to take down my g21 probably 6 times I had an issue with the cruciform being too bent and not clearing the striker pin I ended up taking all the pins out to get the slide off, the rails come off with the slide
What if it wont fire & there is no issue & you just got a cheap trigger bar from p80 so you order another one & it does the same thing so you get tired of it & get a OEM Glock part & BAM all of a sudden FIXED?
FYI no need to remove the extractor, this issue is usually cause by the connector not engaging with the slide and needs to be bent outward.
omg thank you was my exact problem
The quality is crazy yo
Just so you would know at 2:28 that is isn't called a an ejector - that is called the extractor. Ejector is a Sharp PIN that - ejects the Shell out. Extractor - extracts and holds the Shell out of the breech (Barrels Chamber) when the Gun has been fired.
What if its doing this everything is correctly together what would be the next step
bro thank you for this I was so stuck I thought the gun was done for
I see a lot of comments about this and how people automatically look it up. Not to be a snob but when I couldn’t function the takedown this was my first thought.
I'm glad my video helped. If it is still giving you a problem, feel free to contact me back, and I'll try to assist you further.
What if it's all together but the trigger don't r gage anything to fire the gun it did when I first put it together it's a p80 40 cal
This video made my life a lot easier, after my screw-up while installing a new ejector.
This video also made me feel as dumb as a day-old bowl of cold soup.
So... NO thumbs up for YOU !
Thank you!!!!!
My trigger doing the same thing. It resets but wont fire. I took it all apart ant put it back together same prob. Everything is installed correctly. Its a polymer80 frame gen3. Could the problem be bad parts?
Did you ever figure out your issue? Having same issue with mine
Same, mine is doing the same thing. Polymer80 lower gen 3 glock 17
Blake Tyer Try this: th-cam.com/video/Z6BK2bglB4I/w-d-xo.html
I thought the solution to fixing a Glock that won't fire is to wake up from your nightmare. JK, great vid. Saving this to "Favorites," JIC. I found this while searching how to disassemble the slide internals for cleaning.
My G26 won’t fire, sometimes when I rack it, it jams. When it does feed correctly I pull the trigger and it won’t shoot, trigger stays pressed down.
Can anyone help?
My glock 19 fires when it doesnt have the clip in. But when i put the clip in it wont fire why
What is the cause and fix for this issue?
What’s up bro , I had a question whenever I go to shoot, my trigger clicks but it won’t fire even when I load a round into the chamber , do you know what it could be ?
You figure it out?
@@flipbrickss1159 yea bro I ended up switching the guide rod and cleaning the gun , took it fully apart and ended up having oil build up in the striker
What if you didn't leave any parts out and it still does that
i have the sane issue. everything is in place but the trihher is not reseting fully just coming back and sometimes my trigger doesnt reset at all
Question is, what if the trigger is all intact fresh out of the box and still wont fire?
for the record, you dont need to pull the slide apart like you did just to get the slide off, only pull out the striker, then you can pull the entire slide off,
True, only need to remove the striker to get the slide off.
hello if you're still active with your channel, maybe you can help me. i can only pull the trigger to get a click is when i manually rack the slide back and/or lock the slide open.
other than that, i cannot get the trigger to fire at all. i have disassembled and reassembled and all the internal parts are there. any suggestion?
Yo how did you fix it
Any fix for this issue?
Nevermind I figured it out :)
Dude you are a Life Saver. I was shitting Bricks. This happened to when I installed a Lone 🐺 Connector. I thought for sure I fucked something up. You're the Fucking Man.
What was the point stripping the slide?
Anyone have a problem with a glock 17 chambering a round but than the slide is somewhat slid back while the trigger’s in fire mode?
You ever found a fix ?
blurry AF and out of frame half the time, the pain we endure to learn about glocks
Facts
lol. The video is from 2012.
This happend to me last night which was New Years eve. And i shot my gun once the clock turned 12:00 (2020) and it didnt fire. The trigger went down with no click. Everyone saw my gun jam. I was really suprised (P80 Glock19) it was embarrassing to be honest so I quickly just racked the slide again loading another bullet then i took out the Magazine, and then I Fired it (it worked) And then the rack slid all the back since i removed the Mag before i fired the gun.
•But why did it Do that in the first place?
Ha i didnt think oh no what have i done i thought oh no what do i do lol
I am glad I was able to help. Please let me know if I can help in any other way.
Thanks
Thank you. I am just happy to impart a little of my knowledge, and help a fellow gun owner. If i can help later on, please let me know.
Thank you again for watching and for your comments.
What if all the parts are in correctly but yet it still wont fire.
I have the same problem as the other Daniel. I have all of my parts in in the correct orientation and my trigger still wont pull. Can you do another video on that and let me know when you do?
@@TheWarnickthree having the same issue you guys figure out the problem?
@@superbee.83 I ended up having a friend help me out. Also it turns out that my slide was also hanging up on the bottom side of the barrel. I still dont know why the trigger wouldnt break when pulled. Sorry.
What about a p80
Bruh, you take down the slide first. Then take off the back plate. You press the trigger safety and the ejector just falls out as does the little spring and trigger safety plunger.
That may be true, I just found this to be one solution to the problem. Often there is more than one solution for a given issue.
Thank you for your comments.
Saved me thought i folded my shit
I just had this malfunction with a ghost disconnector ill never use a non factory part again
Lol and here I thought I was just a baddass who didn't need all the pieces, thank ya kind sir!
That is not the ejector it is the extractor. and extractor spring rod.
A little piece my firing pin was broken off
What to do if your Glock won't fire?????????????!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
THROW IT AWAY AND BUY A DAMN SLING-SHOT - - - - - - - LOL!!!!!!!!!!!!!!!!!!!!!!!!!
PS - GOOD VIDEO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
That is not the ejector...it is the EXTRACTOR PLUNGER and EXTRACTOR CLAW
no its the firing pin safety & spring the extractor is #11
5 minutes just to get the slide off? Come on, man, I don't have all day!
You buy a shadow systems
You buy a Sig.
My p80 is doing that 🥺
its the trigger bar I ordered 3 from p80 & they all 3 did it I put a OEM glock trigger bar & bam worked fine
@@2stroketyson79 where can I get it
Awful video. Why would you leave the connector off the trigger housing?? And you don't have to remove the extractor & plunger to remove the slide. Once you remove the backplate the slide will come off
That's a super click bait!!!
It wouldn't fire bc he didn't have the trigger bar on it at first!!
Some ppl love n touch they guns more then they wife!!!
well theres 10 minutes 10 seconds ill never get back. What a waste of time!!!
AGREE
I need help I still can’t figure this out I rack my gun then when I pull trigger it does the same thing it never clicks or nothing I have to pull the side up from the back for it to click what can this be I already tried pushing down the back down more nothing works
I need help I still can’t figure this out I rack my gun then when I pull trigger it does the same thing it never clicks or nothing I have to pull the side up from the back for it to click what can this be I already tried pushing down the back down more nothing works