วีดีโอ

Your video got me out of a sticky situation during a trigger upgrade! Thanks!

Video from 12 years ago just helped me change out my forend grip

thank you!

This video made my life a lot easier, after my screw-up while installing a new ejector. This video also made me feel as dumb as a day-old bowl of cold soup. So... NO thumbs up for YOU !

My rubber sleeve is completely broken so I can’t get the back plate off how can I still disassemble this cuz I’m having this issue my Glock won’t fire

You made my day !! I thought I was going to have to send my G5 to the factory until I viewed your video. Thanks a bunch.

What if you didn't leave any parts out and it still does that

FYI no need to remove the extractor, this issue is usually cause by the connector not engaging with the slide and needs to be bent outward.

Question is, what if the trigger is all intact fresh out of the box and still wont fire?

That's a super click bait!!! It wouldn't fire bc he didn't have the trigger bar on it at first!! Some ppl love n touch they guns more then they wife!!!

I need help I still can’t figure this out I rack my gun then when I pull trigger it does the same thing it never clicks or nothing I have to pull the side up from the back for it to click what can this be I already tried pushing down the back down more nothing works

I need help I still can’t figure this out I rack my gun then when I pull trigger it does the same thing it never clicks or nothing I have to pull the side up from the back for it to click what can this be I already tried pushing down the back down more nothing works

I need help I still can’t figure this out I rack my gun then when I pull trigger it does the same thing it never clicks or nothing I have to pull the side up from the back for it to click what can this be I already tried pushing down the back down more nothing works

Old Viet Nam Vet here 76 year young used your video to take down mine....worked like a champ..thanks for posting it...

Awesome, great video very helpful

old gunsmith trick! Pins are supposed to be removed from right to left on most firearms 😂

What is the cause and fix for this issue?

Thank you for this video. It worked on my malfunctioned G19.5 during test on different connectors.

Bruh, you take down the slide first. Then take off the back plate. You press the trigger safety and the ejector just falls out as does the little spring and trigger safety plunger.

What if it wont fire & there is no issue & you just got a cheap trigger bar from p80 so you order another one & it does the same thing so you get tired of it & get a OEM Glock part & BAM all of a sudden FIXED?

Yeh thanks man better progress than i was having looking all over tha internet

You buy a shadow systems

You look foolish, take the dam trigger housing all the way out. Quit fumble fucking around.

Just take the backplate off and fucking depress the cruciform you moron haha

So the top pin is for going through only the slide stop lever's hole?

My mag doesn't feed if u cock it the bullets stay in the mag

I had this issue. Had to take down my g21 probably 6 times I had an issue with the cruciform being too bent and not clearing the striker pin I ended up taking all the pins out to get the slide off, the rails come off with the slide

That is not the ejector it is the extractor. and extractor spring rod.

This video saved me quite a bit of money and some face as well. Thank you!

Good to know! Thank you and take care!

My G26 won’t fire, sometimes when I rack it, it jams. When it does feed correctly I pull the trigger and it won’t shoot, trigger stays pressed down. Can anyone help?

What’s up bro , I had a question whenever I go to shoot, my trigger clicks but it won’t fire even when I load a round into the chamber , do you know what it could be ?

You buy a Sig.

What if I done all those but still won't fire? But once I clauk the slide and squeeze the trigger while pulling the slide back and it fire? What's the hiccup?

Nobody’s dumb enough to leave out parts. You didn’t address any single issue. Thanks for wasting my time. This was truly worthless and those who say otherwise are TH-cam groopies looking for a daddy.

5 minutes just to get the slide off? Come on, man, I don't have all day!

Just so you would know at 2:28 that is isn't called a an ejector - that is called the extractor. Ejector is a Sharp PIN that - ejects the Shell out. Extractor - extracts and holds the Shell out of the breech (Barrels Chamber) when the Gun has been fired.

Very good video, but there is an easier way to do this. If you pull the trigger but it won't release the firing pin (so you can't remove the slide), do the following - 1) Understand all firearm safety rules and ensure your firearm isn't loaded and that you don't have a round in the chamber 2) Pull the trigger fully to the rear and hold it there 3) The back plate of your slide has two openings - insert a very thin screwdriver (a 1/16" punch works great) into the right side (non-square) opening at a slightly upward angle. 4) Press the point of your punch down (you're pressing down on the cruciform shaped part of the trigger that releases the firing pin) and your firing pin should release, allowing you to remove your slide. Hope this helps!

Saved me thought i folded my shit

That is not the ejector...it is the EXTRACTOR PLUNGER and EXTRACTOR CLAW

Lol

ANOTHER WASTE OF FNG TIME VIDEO!!!! MORE LIGHT SLOWER PLEASE!!! WE KNOW YOU CAN DO IT!!! WE THE VIEWER CANT!!!!

Sir your step by step instructions are hands up the best thank you God bless amer and bless you

Dude you are a lifesaver, thank you so much for making this video!

Very good enjoyed it alot been building glocks for a while now. Never have done anything like this before it was awesome ty

Ok but what if all the parts are there and it still doesn’t fire. Like it will reset but then it won’t fire at all

It worked thank you!

What do i do i have a g17 and i put the co2 in it and it does what this guy trigger does like when i pull it nun happens and i have co2

Tip: The firing pin safety will fit inside the firing pin sleeve. So, when you're trying to put those little spring cups in, you don't have to compress the firing pin spring as far. I put the firing pin safety on the work surface and place the firing pin assembly on top. Push the spring down, drop in the spring cups. It's a lot easier that way.

Can someone please explain the problem if you DIDN'T FORGET to install parts?