Police have no right to know what you're searching anyways. Unless you committed a crime and they have probable cause to get a warrant... so you don't have to worry about it anyways.
Great video, but the aspect makes it hard to see. maybe a 16x9 ( horizontal) instead of 9x16 may make it easier for everyone over 30. good stuff man, ty
Agree, great video. Aspect, lighting, and the vid quality is not great, especially for all those tiny parts. Hard to see the shape/edges of certain parts.
first kit i bought from Patmos and it was my first ever and was advertised as "Complete upper and complete lower parts kit" only to find out later that it was not in fact complete, it didnt have the Locking Block and from what i see around online MOST kits dont include one, just an FYI to anyone who may be just starting these build kits n such.
Just looked, Lucas still has the Austrian made Gen 3 26 frames for $65 and the 19 frames for $99. I have one question: If I wanted to build a Gen 5 G31/32/33 would a Gen 4 32 barrel (aftermarket conventional) work in a Gen 5 23? I know that a Gen 5 G23 slide works on a G45 to make a 40 cal G23X. How about a 357 sig G32X? Or a Gen 5 G33? Glock released the Gen 5 G29 and G30 right before Gaston’s passing into great beyond. However there’s no 357 sig models in Gen 5. Even Sig won’t run the 357 sig. Both the P226 and P229 had easy conversions between the 9mm/.40/357 sig. And Glock had easy conversions across the three calibers as well. Thanks
I did the math and everything would come out to $420-ish (before taxes). Not including the 3.5lbs trigger. This is with using the cheapest parts I could find. A new Glock 26 gen 5 at bass pro shops is $529.99. I guess building it would save me some money, and I’d have a green slide 🛝
To avoid and FFL you will have to do machining work yourself. Either with a P80 (google the store) or 3d print one. Its not hard but you will need at least 300 dollars for the tools. Its MUCH cheaper to just buy from a gun store (if you can, that is.)
Lmao sigs are a terrible design. One spring falls out, you have at least an hour repair. I promise you I have over 30 Glocks not a single issue. I have 4 sig p365’s and 2 of them had major issues. It’s easy to see which company to stick with. Sig makes trash now a days plain and simple. They beta test their products in the civilian market. Over 35 pending cases on the sig sauer p320.
don’t forget to turn in to be engraved for serial or my state makes you 3letter initials 0and build number or number build, zip code-10 digits…. but if that number is taken, the state is happy to pick one for u and likely never get it back due to some minor thing in the build they dont like…. and nothing u can do about it. or buy pre serialized from p80 or lone wolf and build and pray when u turn in for registration they dont nit pick……yeah democratic states are AWESOME when u trying to be law abiding joe
@spnfirearms so the frame already has a serial number in bedded into it and you have to do a federal background check for it ? Like a AR lower? Is that the only part you have to a check for?
The police definetly do not like my search history today
I was talking about a remote control bobcat tractor bucket off with two mini guns mounted kn sides with seat removed for extra space for ammo!
how to build p80 for no reason at all mr ossifer
Police have no right to know what you're searching anyways. Unless you committed a crime and they have probable cause to get a warrant... so you don't have to worry about it anyways.
is been almost a month for me
this is the most extensive glock build vid ive ever seen ty
Thank you so much you fixed my gun when it came to the licking blood I completely overlooked it
Very informative! I’m getting ready to do a complete Glock build for the first time and this answered all of my questions. Thank you.
Can you give me a list of all the parts I would need I want to build my own probably a 27
Now make a video about what parts you need to buy online in order to build a whole Glock
Agreed
No need he just sat down and explained the whole video y’all have to be slow the. Internet is too easy
Cant help stupid
A year late but just buy Glock parts kit and polymer 80 Glock frame just make sure they match
Can you send the link to where you get your Glock gun parts from
9mm trigger housing ejector can take the 357 Sig round but will not attempt to even cycle the 40 seen it done
great job brother ❣️ i will forsure use this
Great video, but the aspect makes it hard to see. maybe a 16x9 ( horizontal) instead of 9x16 may make it easier for everyone over 30. good stuff man, ty
Agree, great video. Aspect, lighting, and the vid quality is not great, especially for all those tiny parts. Hard to see the shape/edges of certain parts.
The Lucas tactical Glock 26 frame is out of stock what other frames do you recommend ?
first kit i bought from Patmos and it was my first ever and was advertised as "Complete upper and complete lower parts kit" only to find out later that it was not in fact complete, it didnt have the Locking Block and from what i see around online MOST kits dont include one, just an FYI to anyone who may be just starting these build kits n such.
so cop judah complete set them buy a locking block that’s it?
The assembly is much easier if you put your locking block and locking block pin (1st pin) in first, then do your slide release and trigger pin. 👍
im trying to build a g19 is there anyway you could tell me a website and sum of the decent parts i need to build it?
Yeah he made this much harder than it needs to be 🤔
@@Detman329make a tutorial
@@ebltact.did u find it?
I swear you just mad my day buy dropping this keep the content coming brother
No problem man. I gotchu. I messed up a few times but I’ll get better live
I been looking for a nice site to buy my lowers from an Lucas is what I been looking for thanks again bro
@@spnfirearms is this frame serialized or not.?
Put the back of your striker in the rear of the slide to hold it in place while you install the spring cups.
Just looked, Lucas still has the Austrian made Gen 3 26 frames for $65 and the 19 frames for $99. I have one question: If I wanted to build a Gen 5 G31/32/33 would a Gen 4 32 barrel (aftermarket conventional) work in a Gen 5 23? I know that a Gen 5 G23 slide works on a G45 to make a 40 cal G23X. How about a 357 sig G32X? Or a Gen 5 G33? Glock released the Gen 5 G29 and G30 right before Gaston’s passing into great beyond. However there’s no 357 sig models in Gen 5. Even Sig won’t run the 357 sig. Both the P226 and P229 had easy conversions between the 9mm/.40/357 sig. And Glock had easy conversions across the three calibers as well. Thanks
Great shit bro
Right on. Thanks. Easy enough.
Does the locking block come with the complete slide when you buy it ?
Did your guiderod pop out at the last second?
Thank you finally about to build one😂❤
Is the slide lock spring for the p80 26 the same as the original
Where does the barrel part come from ?? Is it part of the top, bottom slide ??
Awesome build great job
Thank man, respect!
I have a p940sc g26is it the same? My trigger won’t reset properly
How much did you spend overall for this build
The extractor is in the slide, I believe the piece you keep calling the extractor is the ejector
I did the math and everything would come out to $420-ish (before taxes). Not including the 3.5lbs trigger. This is with using the cheapest parts I could find.
A new Glock 26 gen 5 at bass pro shops is $529.99.
I guess building it would save me some money, and I’d have a green slide 🛝
Show me the website where you found the parts
Yo send website
web pls
Bro is not tryna give up that site
@@m90ss wrd
Can you give me a list of everything you need for the top half?
Isnt there supposed to be another pin hole for the locking block?
I wanna go play with big boy legos now damnit 😂
Such and educative video thanks alot
Do the build kits come with instructions?
Those damn P80’s with a heavy underbite ! 😆
I hope that slide had a channel liner in it already , I didn’t see you install one 🤔
why are you recording these in portrait man?
Is permit required to purchase gun frame?
BEAUTIFUL GLOCK!
What's the website you use to buy the build kits for guns ?
He says it at the start
Where can i get a frame that does not require an FFL? please help! thanks
To avoid and FFL you will have to do machining work yourself. Either with a P80 (google the store) or 3d print one. Its not hard but you will need at least 300 dollars for the tools. Its MUCH cheaper to just buy from a gun store (if you can, that is.)
Is putting a 26 together cheaper than buying a complete one?
So all you need is a frame and slide and lower parts and upper parts and locking block
Going to build one. Ty
How do you put the rails in on p80 26
Does it come with instructions?
i just need a cheap one and a single bullet, how much would cost?
Thank you.
Bro said he high 😂
What part😂
Can’t buy Glocks in Massachusetts, but is it legal to build my own like this and then have it registered?
Lucas tactical has all clean firearms right ? And do they come with matching serials or does it not matter if it’s different serials im in texas btw !
I don’t think it’s all matching. They are all clean firearms and they are just assigned a serial number like any other Glock would be
Had a question? When I put my slide on and press trigger. It moves the slide also. And it won't fire. What am i doing wrong?
trigger part that pushes safety plunger for striker to fire may be making contact with slide..you may have to polish that trigger bar piece
😂😂😂 you work just like I used to do😂😂😂 shit falling and springs flying.. good video tho..
I must be on a list from all the shi I've been searching up
thanks so much
anybody got a vid on what parts to cut out?
Assembling from SCRATCH 😎
from scratch would be building it from chunks of steel
Your good!
Def didn't see you put the cups on bro
Hello dear friend your Glock gun it's very strong one 😊
can u do this in vanada
You need better lighting maybe over head to show down into the firearm
Wish i could order frames here in cali...bummer nice vid
Make it yourself
find someone on the Arizona border 😂 I gotcha
I'm a fellow glock 26 junkie
bro got in front of the camera and stressed out🤣🤣 great video though much appreciated
Is it cheaper paying for a gun or billing it?
Building and u can add customs
what caliper is the one you built?
Build a bear.... No, build a Glock.
i just build 26 gen 4 for 295$ all glock parts thanks for the video
What site you buy the parts on?
@@Lando-420it’s like they’re lying
SuperBBb!!!
Hi is this frame serialized or unserialized.?
do you kno where i can get frame which ships to my house not FFL?
Forgot sleeve
does the 19x frame still Work For Any Build Of a 19 ?
Yes Gen 4 And Gen 5’s Only Tho Nothing Under Those Two
@@DheeSantanagen 3 slide works too
@@spec_blext9765 I Wouldnt Recommend Any Gen 3 Slides For 19x Frames But Those Work Too
So the way to build a Glock is to get all the parts for a Glock and put it together.
How much would it cost to build a Glock¿???????¿
What’s another site I can get frames shipped to door
More like "How to build a glock from its spare parts..!"
That’s an ejector not an extractor also the 336 sucks that’s why they upgraded it.
Best way to build a glock is to toss it in the trash, buy a SIG and put a glock sticker on it.
Lmao sigs are a terrible design. One spring falls out, you have at least an hour repair. I promise you I have over 30 Glocks not a single issue. I have 4 sig p365’s and 2 of them had major issues. It’s easy to see which company to stick with. Sig makes trash now a days plain and simple. They beta test their products in the civilian market. Over 35 pending cases on the sig sauer p320.
Glad you agree with me. Glock are generic trash.@@spnfirearms
That black slide looks almost like a zev ?poly 80 slide
This is not from scratch. The term from scratch essentially means to fabricate it yourself.
This is assembly not building 😂
But thanks for the video
👍🏻👍🏻👍🏻👍🏻👍🏻
my guy live streamed him self biulding a glock this is the most american thinh yet
Look up 80 percent builder
That's not building from scratch. That's just putting together.😊
Wow, looking to build a flock from scratch and get nothing but adds. What is going on?
don’t forget to turn in to be engraved for serial or my state makes you 3letter initials 0and build number or number build, zip code-10 digits…. but if that number is taken, the state is happy to pick one for u and likely never get it back due to some minor thing in the build they dont like…. and nothing u can do about it. or buy pre serialized from p80 or lone wolf and build and pray when u turn in for registration they dont nit pick……yeah democratic states are AWESOME when u trying to be law abiding joe
Stop telling the state your builds and problem solved 🤷🏾♀️🤷🏾♀️
Can you make one for me? Then i,ll buy it off you?
Any other place I can get a frame for a 19 with out an FFL or any paper work just straight to my door step
There should be a few websites where you can find stripped frames that’ll ship straight to your door
Don't listen to the haters kiddo... But we need to talk, but not on here,..
I’m interested…willing to pay for assembled pieces
how you got a ghost glock wit a switch what if it go down😭😭😮💨
On bro “ get tf outta hea “😂😭😭😭😭😭😭😭😭
HTF do you not show how you build the channel Anna Gunn
cool! Although, I don't think you know what "from scratch" actually means.
😂So your telling me you can literally buy parts online and just build it home instead of getting a gun permit ? lmaoooo yooo what 😅😅😅😅😅😅😅
$65 glock frame? More like $200.
Just gotta find it at the right places.
Drop the frame sites 🤦🏽♂️
So.... Not from scratch....
500k views😅
Any polymer 80 bucilds from scratch @spnfirearms ???
But it's just assembling factories made pieces.... Not do it by yourself....
Awesome video but what about a serial number lolol how do you order that lol my guy be careful
It goes straight to my FFL. Everything I do is legal and follows the laws. Nothing to be careful about
@spnfirearms so the frame already has a serial number in bedded into it and you have to do a federal background check for it ? Like a AR lower? Is that the only part you have to a check for?
It's called scrap. not scratch