I don’t mean to criticize, but although there is now clearance for a 35” tire, that tailgate is not going to take any rough roads with that much weight hanging off it. That is the reason MOPAR makes it a tailgate reinforcement assembly, to prevent failure.
Nice video, I just lifted my Jeep Wrangler to a 3 1/2 lift and put 35 XD wheels. This video is very helpful. I want to put in my entry for the raffle on the Jeep
I think the RC relocation bracket is a bit too high up. Prefer EAG. Also, regarding everyone's comments about reinforcement, I hear that is definitely needed for JK but JLs are stronger capable of holding 35s plus up to 85 lbs inner trail rail
I had a 2015 jeep wrangler sport unlimited with 35 mud claw tires. With the same as a spare and when I changed the oil I rotated the tires including the spare and got 80k miles off of the tires before I had to changed them out.
I wouldn’t mount any tire directly attached to the tailgate, especially if you’re doing off-roading a lot, over time it will break the hinges on your tailgate. You should get a tire hanger that attaches to the bumper instead
We added 35s on our JL and we found that the swing gate was a little too heavy with just the tire relocation bracket. Had to add the swing gate reinforcement too.
Some places require 3rd brake lights. Near me in Delaware they pound jeeps to death about stuff. They literally didn’t let me pass because “my indicators are too dark” even tho they are brand new bulbs and are stock. Yet they continue to allow someone through with the trunk ratcheted closed and it squealing as it drives
you left out the fact that you have to take the backing off the brake light and adjust the wire for the length.. also you need the bracket to raise the 35" tire higher then the bumper or it will hit with most.
I have a 35” tire on the rear tailgate and the light is visible with no lifting of the light. 🤷♂️ I have both a 2018 and 2022 wrangler rubicons with visible brake lights.
I'm lost , its the hinges /Gate that everyone worries about not the tire carrier itself . Don't get me wrong the carrier isn't exactly strong but its capable of holding the weight ( know from experience) but from old til new the hinges and Gate were always the problem this is why these aftermarket products came about and why Jeep redesigned the tailgate from the way lighter material. Ok sry end rant , regardless must have full size spare !!!! Lol
It only takes one time for it to rip off the back and take out the car behind you and possibly kill them. I've SEEN and heard horror stories of the gate coming off or the tire carrier brake off on the highway.
Not true....i saved a ton by just ordering a 2" tire spacer.....i got 2 because they were only $2 more than a single and me and a buddy split the cost....i spent a whole $12. Took my 35in tire plenty far away from bumper and under b-light
I take it this company hasn’t survived the Rona? No new content or posts in 5 months and went to order some things from their site and half of the products are no longer there. A shame as they have some cool shirt designs I want to order but don’t know if they exist anymore.
Hundreds of rapid-fire video jump-cuts, sometimes in between syllables of one word, make this video very hard to watch. I don't think there is one single segment of this video that is more than one second long. Yes it is "edgy", but it is very hard on the eyes. The content is good but the presentation is horrible.
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบ 8 ทีมสุดท้าย] - ช่วงบ่าย](http://i.ytimg.com/vi/M0S_ReCIkxg/mqdefault.jpg)
I noticed you don’t answer any of the questions your viewers have in the comment section. That doesn’t help your channel any.
I don’t mean to criticize, but although there is now clearance for a 35” tire, that tailgate is not going to take any rough roads with that much weight hanging off it. That is the reason MOPAR makes it a tailgate reinforcement assembly, to prevent failure.
Nice video, I just lifted my Jeep Wrangler to a 3 1/2 lift and put 35 XD wheels. This video is very helpful. I want to put in my entry for the raffle on the Jeep
I think the RC relocation bracket is a bit too high up. Prefer EAG. Also, regarding everyone's comments about reinforcement, I hear that is definitely needed for JK but JLs are stronger capable of holding 35s plus up to 85 lbs inner trail rail
I had a 2015 jeep wrangler sport unlimited with 35 mud claw tires. With the same as a spare and when I changed the oil I rotated the tires including the spare and got 80k miles off of the tires before I had to changed them out.
Do you know what lift is on the grey jeep? 3”? And are the tires 35x12.5x17”?
Thanks for any info.
I wouldn’t mount any tire directly attached to the tailgate, especially if you’re doing off-roading a lot, over time it will break the hinges on your tailgate. You should get a tire hanger that attaches to the bumper instead
We added 35s on our JL and we found that the swing gate was a little too heavy with just the tire relocation bracket. Had to add the swing gate reinforcement too.
Did you have any problems with the TPMS lights coming on after adding 35's on your Jeep JL's?
Got my Doors Off gear on the way! Can't wait. Also 🤞🏽I win DOG1
As an owner with a jk on 40s and a full sized spare. I just took the 3rd brake light off 😂
Some places require 3rd brake lights. Near me in Delaware they pound jeeps to death about stuff. They literally didn’t let me pass because “my indicators are too dark” even tho they are brand new bulbs and are stock. Yet they continue to allow someone through with the trunk ratcheted closed and it squealing as it drives
I know this video is old but what lift was on the grey Jeep?
Did you have an issue when reinstalling the backup camera cover?
Where’s the link to buy the extension bracket? 😏
How do you put rims on backwards??🤔🤷
Hey I’m planing on putting 35’s on my New JL will I have any problems with recalibration or anything in general
What size and kid of lift is on the gray jeep????
Are the stock bracket on Rubicons different? My JLUR has a few inches gap from the stock 285/70/17 to the brake light.
you left out the fact that you have to take the backing off the brake light and adjust the wire for the length.. also you need the bracket to raise the 35" tire higher then the bumper or it will hit with most.
Does anyone have the link to the bracket ?
I’d be more concerned about the hinges and the actual door with that kind of weight
I have a 35” tire on the rear tailgate and the light is visible with no lifting of the light. 🤷♂️ I have both a 2018 and 2022 wrangler rubicons with visible brake lights.
Is those tires on that JL without a lift?
What size are those tires, wheels, and what are the manufactures? Thinking about adding that combo to my Jeep JL
Was gonna ask about psi but it doesn't look like these guys reply to any comments at all.
Really bugs me when youtubers are too arrogant or full of themselves or busy to answer they youtube posters.
I lift jeeps all the time, we use the same bracket on all the jl's we do.
is the grey one lifted??
How about those blackout taillights. Who makes them?
BS on not seeing this brake light with 35's. I can see it perfectly with 35's on my 2021 Rubicon.
As the author of the second comment, I would just like to point out that I appear to be the first person to click the Like button for this video.
Nice video! Is there a lift kit for the grey Jeep JL?
What wheels are those on the grey Jeep?
What size and kind of lugnuts did you use for the aftermarket fuel wheels
Wheels on backwards or tires on backwards?
What lift and tire size on ten grey one?
what taillights are those? they look great!
what is the wheel size and offset on the grey jeep JL ?
What lift on gray jeep?
who else is an og from the main channel
Yup
I'm lost , its the hinges /Gate that everyone worries about not the tire carrier itself . Don't get me wrong the carrier isn't exactly strong but its capable of holding the weight ( know from experience) but from old til new the hinges and Gate were always the problem this is why these aftermarket products came about and why Jeep redesigned the tailgate from the way lighter material. Ok sry end rant , regardless must have full size spare !!!! Lol
I cannot believe I missed this video....I’ve been youtube’d again!!
You should change the fender flares also.
Full supporter
specs on those fuel vectors???
Loving that grey JL build so far.
You can defiantly see the difference between the stock tire mount and the new one
That bracket doesn’t help much . You’re still gonna have issues with the hinge support
What brand are the rims on the gray Jeep?
What is the name of the Fuel wheels ? I’d love to put those on our 2020 JL
I believe they are Fuel Vectors ❤️
Great video, like the to the point, and comparison side by side. Keep it up.
Me over here dreaming about winning a JL to go with my JK.
I don’t get it, a must do? I have been running 35s on my stock carrier for for almost 6 years and no problems
It only takes one time for it to rip off the back and take out the car behind you and possibly kill them. I've SEEN and heard horror stories of the gate coming off or the tire carrier brake off on the highway.
Dont you need some hinge support? That extra weight scares me on my hinges
Nope, 35x11.50s on my stock wheels fits perfect on the stock carrier.
imagine doing this and not installing heavy duty hinges 😂
Need to upgrade the door hinges to....
I hope I have the winning ticket lol. ready for some more great content
You sound like Jeff Gordon 😅
More jeep content .. 4 low knawin on em . lets see it bud
Loving the videos Jack!! Keep crushing tot!
When are we going to see the winner of DOGI vidoe?
Should also look to do tailgate hinge upgrades. Teraflex makes a great tire carrier that braces the hinges as well
What psi should I run on 35 inch tires, just a question?
I run 37 psi on street, and then of course air down on trail depending on the conditions.
Not true....i saved a ton by just ordering a 2" tire spacer.....i got 2 because they were only $2 more than a single and me and a buddy split the cost....i spent a whole $12. Took my 35in tire plenty far away from bumper and under b-light
Can I still join the giveaway?
Try filming on a trampoline next time… it might be smoother..
When you have the first comment but dont know what to say
...and a supercharger.
Who won who won 😭 I never got a call 😭 let’s hope that person who won appreciates it 💯
If you run a 35 inch tire on any Jeep you need a rear bumper with the carrier I would never put it on the back door hinge
It’ll ware the hinges out
I take it this company hasn’t survived the Rona? No new content or posts in 5 months and went to order some things from their site and half of the products are no longer there. A shame as they have some cool shirt designs I want to order but don’t know if they exist anymore.
:28 saw some powder coat
Nice
Hope in the future you will build a 2021 bronco
Lol 😆
you lose a lot of rear view wish they had one thats shorter.
That tire will destroy the tailgate over time .do it right and mount tire off of bumper .mallcrawler
Geez don't move the camera around so much. Geezers like me get a headache from that.
Hundreds of rapid-fire video jump-cuts, sometimes in between syllables of one word, make this video very hard to watch. I don't think there is one single segment of this video that is more than one second long. Yes it is "edgy", but it is very hard on the eyes. The content is good but the presentation is horrible.
Jesus get stability control on your camera or hold it still to much shaking.
what wheels are those on the gray jeep?