How to install your P80 trigger shoe to your trigger bar
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Strictly for educational purposes only!
How to install your P80 trigger shoe to your trigger bar
Not affiliated with polymer 80
I am not legally responsible for any incorrect installations. Install/Modify at your own risk.
#glock #glocktrigger #polymer80 #polymer80trigger #p80 #p80trigger #triggerinstall
make sure to sub to the channel to stay up to date on new content!
THANK YOU!!! Took me a minute to finally find someone who goes over this part.
You're very welcome. Glad the video could help!
@@tacticaltrashpanda took me three days to find someone who goes over this. My Poly kit had an extra spring that I couldn't find a place for in the trigger shoe. I guess it didn't belong there. It also came with two (2) curved triggers, not a flat and a curved one. Awesome QC!
The benefit of this video is showing people what it takes to put a trigger shoe together. Good topic keep them coming.
I appreciate it bro! I'm surprised that there isn't too many videos on the topic
This ones gonna help alot of folks! ✌️💪💯❤️🔥🇺🇲🎯
I really hope so brother. Thanks for watching!
@@tacticaltrashpanda may I suggest you try drilling a tiny hole in the head of your c-clamp so that the PIN can seat in it that way the head doesn't wobble as much when you're trying to crank it down other than that good video brother have a good one
The C clamp was a great idea. Didnt think to use one of those to drive in the pins. Thanks buddy. Video was pretty decent in my opinion. Well spoken, volume was perfect, in frame.
Thanks for watching and leaving your feedback. I truly appreciate it!
FINALLY!!! Took me forever to find this kind of video!!!
Glad I could help! Thanks for watching!
Thank you for your service, Sir!
Thank you kindly!
Nice! I recently swapped out an oem for an Apex trigger shoe. I prefer to buy the shoe/bar already assembled, but they weren't in stock. It was a tad aggravating, but not bad. This video will help a bunch of folks out.
I appreciate the support bro! Yeah, the first time I did this, I had to figure it out myself. It might not be the best way but I made it work out.
Thank you! this video helped a bunch. I thought something was missing from my kit and the instructions on the website did not show this step. after watching your video, I realize that the 2 pins for the trigger were missing! this was a great help!
Happy to hear my video helped!
Doing research for my first build. Thanks for the video.
Glad I could help!
Nice
Glad you made a TH-cam channel
I heard bad things about P80 lower parts kit specifically the trigger housing
Every build can have it's headaches. As builders we just have to troubleshoot sometimes. I've heard where the connector meets the housing can be a bit tight depending on the connector of choice but that is an easy fix. Thanks for watching!
I SPENT SO MANY HOURS LOOKING FOR THIS SOLUTION! Thank you! There are no instructions anywhere for this step and it's been so infuriating! The keyword I was missing was "shoe" ._.
Happy to have been able to help!
Oh man ur killin' me with that cclamp. Just tap them in. I've done thousands
PANDA, panda,. PANDA, PANDA PANDA. first video showing the trigger safety thing. Thank you
You're welcome. Thanks for watching!
Thumbs up all the way. Just got this parts kit and I had no idea how to assemble the shoe.
Happy to hear I cold help! Happy building!
thanks this was the only video that showed this
You're welcome, I'm glad I was able to help!
Massively helpful. Really appreciate it
I'm happy I could help! Thanks for watching!
We support you brother! Great vid!
I truly appreciate it brother! 💯🙏
Johnny Glock has an excellent vid of how to properly remove & replace Glock trigger shoe.
Johnny Glock does a ton of great videos
Thank you homie, everyone else on TH-cam assumes we already know how to do this, you’re video is legit🙏🙏😈
Glad to be able to help!
Nice video thanks for this I have a trigger I needed to put on and I have that kit and I couldn’t figure it out so thanks!! Keep the videos coming
Happy to be able to help! Thanks for watching! 💯
How many videos have you done? If this is your first video, I thought it was awesome! You go slow enough for a “Novice” or somebody that has not done this before, to understand and you speak very, very clearly!
Some people play music, and they also don’t speak clearly, which makes their videos, worthless! I saved your video, and I thought it was awesome!
Thanks for watching man. This was actually my very first video! Thanks for the kind words. 👊
Cool that your first video has helped so many people. Keep up the great work and God bless!
Thank you man. That's all I wish for, to help others. Thanks for watching!
Nice video ik a lot of ppl in this build community would love to change the trigger & trigger shoe🔥🔥
Thanks for watching bro! 💯
Thanks for the backup. Great speech. Really appreciated that. The Truth is important, more now that ever, but people don't always want to hear it. Appreciate this video too. Hope to see more. I'm always down to watch how-to videos. Made sure to sub.
I appreciate it man! We gotta do our part to spread to word to the community! Just subbed back! Thanks for watching bro!
My safety blade is super stiff. Hopefully will loosen up with use.
Also, I use a small vise and a block of wood behind the frame to push pins in. Works very well with no hammering, just go slow and smooth. Thanks for the vid!! 👏🙌🍻
Good video, unfortunately, my p80 parts kit was missing the trigger safety. I already had to deal with the rrm issue, now this. Honestly, I should have just bought a factory blue label g19, or a dagger. So far, I'm not impressed w/p80 quality control. I'll quit crying now, thanks again for the video.
Unfortunately I've been there before as well with the trigger safety missing, but that was through a different company. I'm sure they will make it right if you hit them up. Peicing together a P80 will typically end up costing more than buying a factory Glock but there is something satisfying about building it yourself.
@@tacticaltrashpanda P80 did respond and said they would send the part. The initial build was easy and straight forward until the rear rail module. I'm really looking forward to testing it out. Ultimately, I have to say P80's customer service was very good. That's reassuring. Thanks.
Yeah the rear rails always give people issues. The more you build, the easier it gets to diagnose the issue. I'm glad to hear they fixes your issue. 💯
Great job. I couldn’t film and build at the same so I appreciate all you guys
Thanks for watching. It's definitely not easy. One of those things you get better at over time.
Thanks for the video buddy 😀...I have this same kit, and usually buy my LPK with the trigger shoe already installed...again, thank you.
Glad it could help!
Congratulations brother 🎉 🙌🏾🙌🏾
I appreciate it bro, thanks for watching! 💯
Definitely helped me. Thanks
You’re welcome! Enjoy your build!
This one helped a lot bro thanks 🙌🏽
Glad I was able to help!
Just what I needed. Thank you sir.
Happy to help!
Nice video. I didn’t use the c clamp though. That looks hard. Also I had to polish the metal end. It was very stiff and it’s supposed to be loose.
I usually polish up my trigger bar as well. I've seen guys use channel lock plyers to push the pin too. This is just one method that works for me. Thank you for watching!
Great video. Looking forward to a build vid
I don't know if I'm ready for a build video just yet but if you go to P80 Ralph's channel, he has a ton of informative content. Thanks for watching!
Great video to the point and well explained. Keep up the good work man
I appreciate it! Thanks for watching!
P80 pissed me off with this one. Out of all of the p80 I’ve bought in the past they were pre assembled. Now all of a sudden I have to do it myself 😒
I'm guessing it's for us to choose which trigger shoe we want but I feel you. They've been lacking on their end lately.
Thank you!
You're welcome
This helped me so much. Thanks!
Happy to be able to help!
This was great..Thnaks....But if ound it way easier to do without the C clamps.Jus punch it in
I may have to do an updated video on this! Thanks for the input!
Thank you so much
You're welcome. Thanks for watching
Thank you!!! Helped a lot.
You're welcome! Happy to hear that!
thank you
thank you
thank you
You're welcome, thanks for watching!
You need a smaller hammer panda!
You're right! I need to buy one!
Great video hommie. This one should help out a lot of people. Welcome to creator status :).
I appreciate it Zeon! I really hope it does bro!
Awesome- this helped a lot!
Happy to help!
Is the trigger safety the same as oem Glock one? Got a plain shoe no pins wanna make sure it’ll work
Not sure man.
I followed step by step but my trigger shoe is stiff doesn’t move freely like in video
I appreciate you was hard for me now ik the tips thanks a lot 👍
Glad I was able to help! Thanks for watching!
Good job my Brother
Thanks for watching
Great video soldier..✊💪💯👉💥💥💥💥💥
Thanks for watching Tec! 💯
@@tacticaltrashpanda no doubt fam, keep up the good work..
Thanks bro really appreciate it
Happy to help!
Definitely helped, Thanks for the vid.
Glad I could help!
Thanks homie
Hi, whats the deal with the little spring that isnt in the trigger connector spring?
The shoe safety blade?
@@tacticaltrashpanda no, its a spring. I called and they said its for the subcompact version and not needed on the g19 frame. Thanks :)
What are the name of the “pins” I can’t find any replacements I lost 1 and I can’t find anyone that sells them someone please help… great video Cclamp is a gunsmiths best friend…
Try looking for Trigger Shoe Pin
Fantastic
Good job thanks
You're welcome!
I bet channel locks small pair work easier than c clamp
I've seen it done with channel locks before. You definitely can use them if you don't have a small C-clamp. This method works pretty fast off camera.
Why use c clamp ? Tapping with a mallet would be so much easier.
There are many different ways to do it. I didn't have a small hammer at the time.
Are p80 complete uppers any good
The honest truth is that I've never used them so I wouldn't be able to give you an an answer.
I did this and my trigger when it cocks it won’t shoot any suggestions?
You may have a bad connector. Is it an aftermarket trigger housing? You might have a bad connector angle or your connector is slightly snagging on your trigger housing.
Thank you. Only video to find out if I did it right.
Glad to hear it helped, it means a lot!
🖤👏🏽 👏🏽👏🏽Thank you!
Thanks for watching CarbonQ! 💯
Anyone one else watch this video for there first build and it shot full auto cause it definitely ain’t shooting semi😂
That has nothing to do with this video. Check your sear and striker engagement. Possibly also your connector.
👍🏼👌🏼💪🏼🔥🍻
First lol a part of me died
You're the man! Thanks for the support bro! 💯
Mine is all stiff. Wtf!!!
Sorry to hear that. I've heard a few ppl tell me they have this issue. I've never had it though. I wish I had a visual to see exactly what is going on.
@@tacticaltrashpanda I just think it’s a bad batch. I purchased 4 p80 branded lpks and when I ran into the super dwad trigger, I thought it was the frame. After, I just thought what if it’s the trigger, swapped out a different one and noticed significant difference in the movement.
If you can email me I’ll send it to you bro. Help all of us out. You might have a better idea of it than me lol. Cus I have not seen a video about it on TH-cam. Or maybe I’ll make a video about it bro. Lol