Painting my 7.3 powerstroke’s intercooler pipes and turbo spyder!
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- nohalfassappar...
Donate here to support the channel - paypal.me/NoHa...
Move Bumpers- bit.ly/41hc97w
Coupon code: NoHalfAss
Amazon links:
Oil drain valve- amzn.to/2OZpLA2
Rev-X oil additive 2pk- amzn.to/3rx8NvP
FL-1995 motorcraft oil filter- amzn.to/3kUYQXC
My high torque starter- amzn.to/37i7Qft
DB electric high torque starter (if first link isn’t available)- amzn.to/2rHPPbm
Mishimoto trans cooler- amzn.to/3boL8Gj
Mishimoto performance radiator- amzn.to/41gGCCG
Edge monitor (gauges)- amzn.to/2xHTHso
KC300x turbo- amzn.to/3IsRkO5
200 amp alternator- amzn.to/2EvagLD
Dual steering stabilizers- amzn.to/2HlRkjQ
Front grill- amzn.to/41enN3b
Bulletproof 16” drop hitch (no sway bar attachment upgrade)- amzn.to/38eSefP
Tow mirrors- amzn.to/49gFp0X
Afe air filter- amzn.to/2YMbVEi
2005-2007 headlights- amzn.to/31mv3tX
Tailgate assisting shock- amzn.to/2LqZvyo
4” LED light pods- amzn.to/2MhI84W
42” light bar- amzn.to/2M9honh
Rock lights- amzn.to/2ZdI1fP
Bluetooth wiring harness- amzn.to/2ZfNYsH
100ft black and red wire- amzn.to/3dYWssd
5x8x18 exhaust tip- amzn.to/2VnTKpt
5x7x12 aFe exhaust tip- amzn.to/2JaVgnS
Archoil friction modifier- amzn.to/3aHyWi4
White bed liner spray- amzn.to/3awRiCm
Candy blue paint- amzn.to/2WgGDHi
Solar panel battery charger- amzn.to/2YPtlAe
White Rodgers glow plug relay- amzn.to/388ekPh
Rev-X oil additive- amzn.to/33FYyYt
7.3 international badges- amzn.to/2KD28vY
7.3 international badges- amzn.to/2KCu8PY
Upgraded fuel pressure spring- amzn.to/2OMqfcz
Napa 6637 air filter- amzn.to/2YTHxZ0
Smoked 3rd brake light- amzn.to/30tCRcS
Air intake heater(AIH) delete plug- amzn.to/2K4CqAK
5” straight pipe- amzn.to/2XoLszG
MBRP 4” turbo back straight pipe- amzn.to/2XnD2bN
Everlast welder- amzn.to/2IxkMUp
Wheel cleaning brush- amzn.to/2rVgQI7
Shackles on front bumper- amzn.to/2XlQuKc
Smoked tail lights- rover.ebay.com...
Air intake heater delete plug- m.ebay.com/ord...
Riffraff AIH delete code eliminator- www.riffraffdi...
There are eBay affiliate links on this website, if you click those links and make a purchase I may receive an affiliate commission.
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites
2001 7.3 powerstroke
Candy blue paint- amzn.to/2WgGDHi
I would recommend self etching primer before painting.
definitely would have not only helped with longevity, but also in hiding the imperfections in the metal underneath.
It's a FORD, it should be BLUE. Looks great 👍👍💙 the BLUE
They look 🔥 under there, I like how it matches the alternator nicely!
King Shaka Customs thanks bro! I’m pretty happy with it!
I just checked ... Living On Wheels did paint his stuff Red.
Peeping Tom okay sweet!😂 idk why or how I got confused. Lol
80HD Projects he did say in his video before he painted them that he wanted to do a blue but a blue unlike “Sinister Diesel Blue”.
That blue pops, truck looks like a monster like always.
COlorado Grown thanks bro!🤘🏻😎
Bro you should build a scaffolding stand for easy access lol.Keep it up am taking note ready for my own 7.3 soon💯
abs jakson hahaha not a bad idea! 😂 and sweet! Glad you enjoy the videos!🙌🏻
How do you not have have 100,000+ subscribers!!! I’ve been watching since the start of your vids on the 7.3 and it amazes me!
Carter Lawson I wish I did more than anything bro!!! And thank you!!🙌🏻🙏🏻💯
80HD Projects it seems like it’s hard for these truck and car channels to explode in size but once they do they take off!
Carter Lawson I hope that happens man. Right now it’s costing me way more than it’s making me 😂😂😂 but I enjoy it either way🤘🏻
80HD Projects hey bro! Any suggestions or tips for installing a 5” turbo back today!
Carter Lawson a friend to help installing the down pipe to the turbo would be nice! Getting that down pipe on the turbo is the hardest part but if someone is under the truck holding it up while you line it up and put the clamp on will help a ton. Also to get the clamp off to take the old down pipe off, put a pry bar or something on the edge of the V-band clamps and hit the back of the bar with a hammer. If you watch my straight pipe install video you’ll get a better idea of what I mean.
This looks sick! Might do this to my 7.3 when I get it
Parker Betteridge thanks bro, and nice!!!🤘🏻
Assuming your monitor is plugged into your OBD2, you'll never see more then 25psi since that is the max the MAP sensor can read. A physical gauge tapped into your AITH delete plug will give you an actual readout. With a hydra, intake, exhaust and billet wheel you should be at about 35psi.... To make sure you're not losing boost you should put your hydra on stock and you should be seeing 16psi minimum, 18-21 full throttle..... Your boots look original and is most likely where most of that soot you cleaned off came from. Over time they get pin holes not visible to the naked eye. You should change them out for a boot kit from BD diesel, riff raff, vp racing, sinister, etc. Inexpensive insurance if they aren't leaking or will most likely recover any lost boost if they are.
Interesting! That’s one of the great things about making these videos is I learn so much from helpful people like you, so thanks!🤘🏻 and I looked into the boot kit from riffraff before and definitely plan on getting it eventually💯
I just put all sinister diesel pipes on my 7.3 btw your truck looks dope man
Nice bro that’s awesome! And thanks🤘🏻
Looks good man! You weren't wrong with both the blue and red haha. I originally painted them blue to try out the color and ended up getting them powder coated red with the new turbo install. I'd say the blue color choice you went with was better than mine anyways.
Living On Wheels thanks bro! And okay that makes sense cuz I got confused when I thought you did red and then later saw that you did blue 😂😂😂
Man looks sick bro that blue is sweet 🤘
Thank you bro!!🤘🏻
I'm currently painting my cac pipes...I'm more interested in how that alternator was painted 🤔
Hahahaha yeah painting the alternator WOULD be crazy! The alternator came that color 😂
You should look into Eastwood’s diy dual voltage powder coat gun,and a used old oven,you could powder coat all the parts and have a lasting durable paint job,that’s what I plan on doing for my 7.3, I just need to build big oven
Thant’s a good idea bro I’ll definitely have to check that out!!!🤘🏻
Get a big bucket.. buy a 5 gallon purple degreaser..$22 WalMart...fill bucket...pit parts in and leave over night...next morning they will be clean...I used oven cleaner to finish outside cleaning... spray down.. And you are done
That’s a good idea bro! Thank you!🤘🏻🤘🏻
Nice video! I need to start making some videos on my 7.3
The Blue is a good color.
Paul Castillo I like it too!
Like how it came out nice job bro I thought of painting mine but I just ordered them from senister
David Paniagua thank you bro! And nice!🤘🏻💯
Great vid! Thanks! Can you share the paint used?
Thanks man! I’m glad you enjoyed it. One thing I would recommend is putting down some grey primer first. I didn’t really have any knowledge on painting at the time of this video but I definitely think it would have been better if I used primer first 👍🏻
amzn.to/4aVDiRR
@@NoHalfAss Thanks bro, about to do this to my charge pipe and save a painter charge.
Lookin' great brother!
7.3 Liter Truck Stuff thanks man!🙌🏻🙏🏻💯
Nice i might just do this instead of buying the expensive ass sinister pipes.looks good👍
Nice bro! And thanks!!🤘🏻
Nice bro! And thanks!!🤘🏻
I just bought my first diesel , 1999 F350 and your videos have been extremely helpful! I see we have the same knn air filter . Are you still using the same model knn or have you changed ? I’ve been looking at S&B CAI because I’m worried about dust with this knn being open. Much appreciated!
I just have the K&N intake pipe but I switched the filter out to a dry filter from another brand a long time ago. I was told the oiled K&N filters aren’t very good
Mine is illusion red...wish I could post a pic of my 7.3 engine with the red accents
Send me some pics on Instagram!🤘🏻 @80hdprojects
@@NoHalfAss pictures sent
Do you mind sending me a picture of how it turned out? 907_levi is my Instagram. I’m deciding on illusion cherry or illusion blueberry
what kinda of paint did you use a high temperature paint or what?
amzn.to/47xqHD8
gojo hand cleaner kicks ass for cleaning greasy parts as well
just sayin
russell jones damn really?! Never heard of that one! Thanks for the info!🤘🏻🙌🏻💯
Love the vids
Nicolas Calandro 🙌🏻🤘🏻🔥💯
One of my Favorite videos you’ve done so far! Does spray paint have a temp rating?
Thanks for finding time to upload while moving too. Busy busy
I think it’s better moving from a smaller place to a larger place. In reverse can really suck because it doesn’t all fit!! Unpacking for weeks and can’t find what you need when it’s Needed.
Jeremy Keith thanks bud! Glad you enjoyed it! I don’t know the exact temp rating but I do know it said high heat resistant on the can so we should be good!👍🏻 lmao. and I agree with you on the moving part💯
80HD Projects I was just thinking of doing same with my truck and was researching VHT rated high temp spray. VHT offers varied temp ratings, exhaust 1300-2k, 650 and 250, I think. Smoked my tail lights with their night shades and like it. The exhaust spray seems cool because it says it has ceramic in it but I need to research it some more.
Jeremy Keith oh nice nice! That’s very cool man!
Jeremy Keith I think the hardest thing was cleaning all the oil off the spyder but if you like working on your truck it’s not a bad project and looks awesome after👍🏻
80HD Projects also makes everything else look so dirty in engine bay. Never ending process.
Have you thought about painting your engine cover? Saw some cool ideas on ChrisFix channel. Large cover that hides so much of the grim below. Good spot for a “No Half Ass” decal maybe. That way your viewers see it every time you lift the hood.
What do you think of painting the powerstroke engine Plastic too? A little bit too much? I love when you work on your truck... I wanna paint mines (thanks to you) red... Cause my truck is red...
YENKOGT you thinking of doin the plastic blue like the pipes or redoing it black??🤔 and nice bro red would look great too especially if it matches the truck!🤘🏻
Looks cool! Too much stuff and pipes wires crossing all over...maybe I'm just partial to 6 ina row...
Carter Scott thanks man!!
Was this just fir the color or did you want it to look like sinister pipes lol. Looks great though!
Nah I don’t care about sinister I just wanted the pipes to match my alternator. The alternator came blue so it wouldn’t make sense going with any other color. Lol
🔥🔥🔥
The blue is sick bro..and damn it did ryno answer you?
jam84 ** thanks bro! And no! Lmao. I stopped trying for now. Don’t want to bug him. Maybe when my channel is bigger I’ll be able to get ahold of him easier. Although I was hoping being featured in one of his videos would help the channel grow a lot. Hahaha
Well I'm glad I found your channel! Keep doing your thing.
jam84 ** thank you! Glad you enjoy it🙌🏻
Did u put the napa filer with k&n pipe and how that work?
Adrian Perla it’s an AFe filter and it just slipped right into the old K&N intake in place of the K&N filter🤘🏻 the Napa one probably would work too. As long as it’s a 4 inch inlet
how’s the paint holding up after three months?
Still good! I’ve scuffed them moving them around installing the new riffraff intercooler boots, but other than that all good! No peeling or cracking.
Great informative content! I watch Ryan Mayer’s channel “Ryan Mayer” he does a lot of mods to his Cummins, Chevy & now his girlfriend Katy’s Powerstroke truck. He does at home powercoating series. Check it out.
The blue looks awesome!
Thanks again for all you do making your videos and I look forward to seeing your next video!
Joseph Cirelli I watch his channel too! He makes GREAT content🤘🏻🔥💯
Hey mate , how do you go running 40s I've heard that they rub on the leafs when full locked or the car is flexing off road , thanks
Juliano Martino it’s all about the wheel offset bro. I never new about wheel offset before and my 37s rubbed a lot cuz my wheel had a offset of zero. Now I have -44 offset and the 40s baaarely touch the leaf springs at full lock. Barely. I know someone with -75 offset wheels and their 40s don’t even rub with flex. Negative offset pushes the tires out, away from the leaf springs.
@@NoHalfAss thanks for that , im from Australian and love watching your videos cause a 7.3 is my dream car and I'm hoping to buy one soon its just shit cause over here in Australia a 7.3 dual cab with around 200k kilometres in mid condition cost around 50-60k
Did you paint your alternater?
No it came that color
Have you reached out to any possible sponsors?
T Wayland I’ve tried contacting a few companies but don’t even get a response back. Channel is probably still too small. Lol. Hopefully one day though 🤞🏻
@@NoHalfAss it just takes that one person to reply. Keep it up
He painted them a maroon color to match his truck.
Am going to put $300,000 bucks in my f350 4x4 year 2000