The EASIEST Water Tank Setup for ANY Detailer - Purple Reign Mobile

แชร์
ฝัง
  • เผยแพร่เมื่อ 31 ม.ค. 2025

ความคิดเห็น •

  • @diamonddetails9445
    @diamonddetails9445 11 หลายเดือนก่อน

    Bro, you're back 😮 awesomeness 😊

  • @FernandoMartinez-gr6yw
    @FernandoMartinez-gr6yw 3 หลายเดือนก่อน

    How is your extension cord reel mounted?

  • @mikeytheref3546
    @mikeytheref3546 11 หลายเดือนก่อน +1

    Have you ever had an issue with your pressure washer when you’re not using it would start on and turn off as if somebody pulled the trigger? I’ve had like three pressure washers and this has happened not sure if it’s normal or not.

    • @GLEECED
      @GLEECED 11 หลายเดือนก่อน

      Yooo that usually is a faulty pressure washer and also the pump is failed because lack of water flow, if flow is good then it’s faulty if it’s brand new if it’s a older one then it’s just been worn out/burned out

    • @ArthurMSoto
      @ArthurMSoto 10 หลายเดือนก่อน

      Did you prime the pressure washer before using?

    • @cutlasssupreme508
      @cutlasssupreme508 10 หลายเดือนก่อน +2

      Yes. You must remove all the air out of all the lines first... So before you cut the Pressure washer on you must get the water to flow through the lines... But if your gravity feeding, air will either leak out very slowly or air will be trapped; and once you cut the Pressure washer on it will "cry" or indicate to you that it is starving for water pressure which is " whining sound.. " cry" because air is in the lines and that you're not getting any water pressure..

    • @JR-yj8wp
      @JR-yj8wp 5 หลายเดือนก่อน

      @@cutlasssupreme508how do you prime it ?

    • @cutlasssupreme508
      @cutlasssupreme508 5 หลายเดือนก่อน

      @@JR-yj8wp i use a pump... That means you need a power source such as a external battery to power the pump... you'll need a
      switch to start the pump .. once you hit that switch the pump will draw water and push the air out; then the water will flow freely... I don't gravity feed. What the people don't tell you in most videos is that gravity feeding will destroy a electric pressure washer if you don't have it connected to a "home garden" hose... Those things push at least 13 to 17 GPM... If you have a tank and are trying to gravity feed, eventually the pump inside the pressure washer will fail due to the lack of
      " GPM" it needs to operate not the pressure.. pressure is one thing but gallons per minute is another...

  • @KingTheDetailer
    @KingTheDetailer 10 หลายเดือนก่อน +2

    I have the same Ryobi pressure washer, been going strong for 2 years for 100$ why spend 300$ plus when this does the same and I'm also gravity feeding

  • @bixsn
    @bixsn 11 หลายเดือนก่อน +1

    1:24 what’s the name of that adapter that’s in the water tank bro can’t find it

    • @Businessmankam
      @Businessmankam  11 หลายเดือนก่อน

      Look up “90 degree brass 1/4 male fitting “ Home Depot should have them man !

  • @SimTastick1771
    @SimTastick1771 9 หลายเดือนก่อน

    have you ever used your customers power (outlet), or do you always use a generator?

  • @KD_2Timez
    @KD_2Timez 10 หลายเดือนก่อน

    Where did you get your water tank from?

  • @ibrahim92002
    @ibrahim92002 11 หลายเดือนก่อน

    Where are u from? Also i dont think the insta in the disc is updated

  • @Cyanidekilz
    @Cyanidekilz 11 หลายเดือนก่อน

    What state?

    • @titusfox9690
      @titusfox9690 11 หลายเดือนก่อน

      California!

  • @EmviGaming07
    @EmviGaming07 11 หลายเดือนก่อน

    Super early

    • @Businessmankam
      @Businessmankam  11 หลายเดือนก่อน

      Appreciate the support man ! Make sure to like the vid for ya boy too!!

    • @EmviGaming07
      @EmviGaming07 11 หลายเดือนก่อน

      Ah almost forgot the most important part

  • @julientaylor
    @julientaylor 11 หลายเดือนก่อน +1

    1:42 Hose is kinked!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!