Sir you helped me out ALOT! I'm in building maintenance and we are starting to play around with recycled water to help keep the buildings and walkways cleaned. God bless 🙏🏾
That’s a beautiful thing out there doing that with your baby girl bud. Keep that up. That’s a great daddy right there!!! We need everybody to be a daddy like this that kids learning even though she’s not paying attention she’s learning this is what all these kids are missing practical knowledge.
Answers my question right off the bat. I just built a sewer jetting machine, and just assumed it would gravity feed... well, it doesn't.. but, now I see, Ill just throw a pump in the mix and get it going. Thanx for posting this! Peace and Blessings!
@@WopDaBarber999 yeah, out there in youtube, i forgot which channel it was that showed it, one of the pressure washing channels. If you look at your pw while its running, you will see a valve open and blow off water when your not pulling on trigger for a period of time. You can run a ¼ hose from there into your buffer tank. Easy peasy.
@@bradlwykfulbright this is true for gas power pressure washer only. On electric pressure washer there’s no pressure release valve. From my understanding the electric pressure system completely turns off suction of its internal pump. So you can’t damage your electric pressure. The problem only exist on the water pump creating pressure. You can put a extension electric outlet that has an on and off remote like a Car key remote to shut it down. So that special extension with remote will be in your generator. You then connect the water pumps male plug to it. Simple.
@@pandassudsnshine4125 The transfer pump is what burns out. I got a $100 ryobi one and didn't have an overflow line on it and it burned out before I could rinse all 4 wheels off. Basically get a second hose splitter like in the video and send one to the pressure washer and one back into the tank.
Thanks for the info I'm doing this so I can powerwash my parents house driveway from the rain barrel hooked up to the gutter. Just ordered my water transfer pump.
great job explaining!! not 20 minutes long 👍🏼 was on the fence about switching gas to electric pressure washer but obviously the shit works great thank you!!
I have been gravity feeding my pressure washers from my water tank for over for 6 years. Never had an issue. I have both a gas and electric pressure washer. Models are HONDA GX200 and the Kranzle K1622TS 1600. You have to ensure your tank is up a little higher than your pressure washer. Easy peazy : ) Also, I have never had to buy a new pump or pressure washer. Have had these same models for a long time and they get used every day 5 days a week. BUT I have recently gave my Honda away now I just use the Kränzle K1622TS 1600's they are fantastic for detailing vehicles!
Bruh thanks a lot for this. I have been trying to figure out how to get the water to my pressure washer a lot faster. Thanks man great video. I subscribed as well.
Dude thats an awesome video .Thats exactly the setup I need .I have a 3000 gas pressure washer and we need to run it where there is no electricity .They make this pump in dc battery powered .Going to harbor freight to buy it.cannot wait to try it out.Thanks bud
Exactly the video I was looking for. I was wondering if this would work. I have the same pump and wondered if it would keep up and not burn out. I assume it's still working fine?
Great video Bruh, I'm just setting up my rig and looking for the best simple solutions. I have a question. I have a paxcess electric pressure washer and I can't get the info on what size hose or adapters to buy that will allow me to use a longer hose and other accessories. I bought the most common size suggested M22 14mm 1/4 in male adapter. It was too big for the female connection to my Paxcess 2300 1.8gal Per min unit. Can you help? trying to get a 50ft hose, foam Cannon & short gun set up Thanks
I use an on demand water pump from my IBC tote to my pressure washer. not sure how long your pump would last or burn up if not always water running through it
Hey dream clean mobile great video. You can get a similar pump that is 12v DC and wire it to the trailer and make it run both directions to fill or empty the tank. I could tell you the wiring if you needed it. I am about to build a small setup myself
With the pump attached? Unless it’s a bad pump the pump shouldn’t stop pushing water. Here’s how I would diagnose I would first attach the pump to the tank to where water could enter into the pump and plug it in to turn it on. And watch the water come out the opposite end . If you have a steady flow of constant pressure you know the pump is doing it’s job and it’s something on the pressure washer side You can check pressure washer by plugging it into a water connect from the house and see if your losing pressure. Also check on how long your hoses are coming to and from the pump. It may be pushing but loses pressure as it goes through the hoses
@@dreamcleanmobiledetailing i got it from tank to small hose to pump cut it on and it's coming out at a good rate maybe my hose is to long on the end hooking to pressure washer. It'll run good and then seem to run out of water after a few seconds
Was thinking on using this but what I come to find is this works great but has no turn of it on switch as of now I’m looking at some that once you turn off the water it dumps down once it doesn’t sense any and some claim or say to safe to run dry so I will know next couple weeks how it goes for me haven’t seen any videos like this other than you my guy so maybe I’ll make one to help people out aswell
My cap was already on the tank when I purchased it. But if you go to your nearest plumbing retail store they can outfit your tank for you with the right fittings
So when the pump is on, is it building pressure in the line? or is it in kinda like a neutral mode waiting for the trigger to be squeezed? Wondering how long this pump has lasted you so far.
It running continuously but i use a gas pressure washer that has a release valve so if its just too much pressure. the pressure washer will release it. but there's never a delay when i squeeze the trigger
i have a community to pressure wash, my question is where can i connect the pump to get power to it? driving an F150 2019 and have an outlet inside my truck..but not sure if i have to run the truck which would drain the gas a lot...
What’s up man, I’ve gotten the same setup as you with the water pump and electric pressure washer and I’m having problem with the consistent water pressure coming out the electric pressure washer. It’s barely coming out and I was wonder what I need to do to have the consistent power
Are the hoses coming to and from your pump too long? The shorter the better If you connect the pump to the tank and leave the outlet hose open (not connected to the pressure washer) plug the pump up and if water comes out strong it’s the pressure washer. If not then you need to check your hoses if they aren’t super long you have a issue with your pump. Unless your water source is sitting on a crazy incline or something
i have no idea what that exact piece is. what i typically do is take my tanks to the nearest plumbing retail store and have them look at it and they can usually provide me with the best fittings
![How to Gravity Feed Pressure Washer [ Tutorial ] #detailing #cardetailing #autodetailing](http://i.ytimg.com/vi/sMqk8JWV80U/mqdefault.jpg)
![กินอาหาร ถูก vs แพง!! จานละ 500,000 vs จานละ 50!! [Ver. 2024]](http://i.ytimg.com/vi/FF_HppKg4vs/mqdefault.jpg)
Straight forward unlike these guys that wanna talk about their grandma, thanks
Thanks for the video !! Very plain, simple, and straight to the point.
Sir you helped me out ALOT! I'm in building maintenance and we are starting to play around with recycled water to help keep the buildings and walkways cleaned. God bless 🙏🏾
That’s a beautiful thing out there doing that with your baby girl bud. Keep that up. That’s a great daddy right there!!! We need everybody to be a daddy like this that kids learning even though she’s not paying attention she’s learning this is what all these kids are missing practical knowledge.
@@justinsmudde2554 appreciate that. she can practically run things on her own now 😂😂
She’s so pure and amazing ❤️ she just wants to help you out and just be involved in whatever you do 🙌 I love you! Your a great father
Thats whats happens when they stick around
Answers my question right off the bat. I just built a sewer jetting machine, and just assumed it would gravity feed... well, it doesn't.. but, now I see, Ill just throw a pump in the mix and get it going. Thanx for posting this! Peace and Blessings!
Extra tip for ya: run an overflow line back into your tank, for when you let off trigger. Prolongs life of pump and pressure washer even more.
What’s an overflow line?
Is there a video for that?
@@WopDaBarber999 yeah, out there in youtube, i forgot which channel it was that showed it, one of the pressure washing channels. If you look at your pw while its running, you will see a valve open and blow off water when your not pulling on trigger for a period of time. You can run a ¼ hose from there into your buffer tank. Easy peasy.
@@bradlwykfulbright this is true for gas power pressure washer only. On electric pressure washer there’s no pressure release valve. From my understanding the electric pressure system completely turns off suction of its internal pump. So you can’t damage your electric pressure. The problem only exist on the water pump creating pressure. You can put a extension electric outlet that has an on and off remote like a Car key remote to shut it down. So that special extension with remote will be in your generator. You then connect the water pumps male plug to it. Simple.
@@pandassudsnshine4125 The transfer pump is what burns out. I got a $100 ryobi one and didn't have an overflow line on it and it burned out before I could rinse all 4 wheels off. Basically get a second hose splitter like in the video and send one to the pressure washer and one back into the tank.
Perfect information, fast and practical delivery. Thank you!
Cute kid, too!
Great video and love that you got the help of your daughter. From one father to another. Get your grind on
Thank you for putting this video up, it's very helpful. I like that the boss lady is supervising her daddy.
Quick and to the point. Thanks
Thanks for the info I'm doing this so I can powerwash my parents house driveway from the rain barrel hooked up to the gutter. Just ordered my water transfer pump.
Thank you for the tutorial!Nice video.
Adorable little helper there.
No Problem and she says thank you 😁
Same one I use. Going strong for 6 months now 💪🏾
💪🏾
great job explaining!! not 20 minutes long 👍🏼 was on the fence about switching gas to electric pressure washer but obviously the shit works great thank you!!
Yea man give it a shot, it’s been working out great for us
Your video actually helped me with what I need to do thank u sir...
Great little portable pumps at HF. I use mine to transfer water from truck tank to 2500 gal. House tank.
Thank you brother for the information 🙏
Picking one up Friday man thanks for this
Great idea, massive thanks.
No problem
Thank you for this video 🤝🏾!
Great video! 🙏
Great video thanks for the help on how to set up helped alot 👍
Thanks for this tip!
No problem
Great video thanks for the post very helpful on making my decision.
I have been gravity feeding my pressure washers from my water tank for over for 6 years. Never had an issue. I have both a gas and electric pressure washer. Models are HONDA GX200 and the Kranzle K1622TS 1600. You have to ensure your tank is up a little higher than your pressure washer. Easy peazy : ) Also, I have never had to buy a new pump or pressure washer. Have had these same models for a long time and they get used every day 5 days a week. BUT I have recently gave my Honda away now I just use the Kränzle K1622TS 1600's they are fantastic for detailing vehicles!
Wish all videos were helpful and straight to the point, just like this one, thank you
no problem
Helpful video! Thanks bro
I needed this info bro thank you for clear explanation of what is needed and how to install 💪💪
No problem thanks for watching
Great information man
Aye I appreciate you brotha you saved me over $800 with this video
Great video man !
Salute...preciate it bro...hope your cup overflows with blessings
Thank you
Bruh thanks a lot for this. I have been trying to figure out how to get the water to my pressure washer a lot faster. Thanks man great video. I subscribed as well.
Appreciate you man
Love that you have your daughter there. I learned alot from my dad, literally have saved money by doing alot of things myself based on his teachings.
She basically can run things on her own lol
Great video
Thanks bra this helped a lot
Definitely what I needed
thats great info thanks
Dude thats an awesome video .Thats exactly the setup I need .I have a 3000 gas pressure washer and we need to run it where there is no electricity .They make this pump in dc battery powered .Going to harbor freight to buy it.cannot wait to try it out.Thanks bud
Glad to be of Assistance
@@dreamcleanmobiledetailing will this work with a 4200 psi washer ?
@@sunnydylan8034 yes
Thanks for the info
amazing my man much respect
Appreciate it
Good stuff!
Thanks friend…..good video.
Thanks buddy
You guys Inspired me to start my own business I’ve already started investing.
Yes sir let’s get it
Amazing thanks a lot brother, keeps these videos up
Shout out from Rosa's Maid Service St. Croix.
great video bud
Exactly what me and my buddy was looking for thank you bro appreciate your time and making the video 💯✅
Thanks for watching. Hope it helps
Thanks Bro.
Nice setup bro 👍🏽
appreciate it
Great video. however, I would recommend using an on-demand pump. They make pumps that will only run when you pull the trigger on the pressure washer.
Link to that pump?
I’d like a link to the one you use as well
Very helpful My pressure washer wouldn’t pull any water from my tank now hopefully this helps
Did this method help ?
@@edgarapolonio1334 yes it did
What reduction did u use for the tank to normal hose size?
Thanks bro
What connections did you use for the water tank?
That is the solution when no tap water, great!
What ibc fitting you use coming by from the tank ? I been throwing money at this and feel i need a whole different piece
thanks bro
Exactly the video I was looking for. I was wondering if this would work. I have the same pump and wondered if it would keep up and not burn out. I assume it's still working fine?
keep making content 🫡 helpful
Thanks for the video...you just got a new subscriber
Thanks man!
Thanks for making this video! Any updates on how the pump holds up over time?
My pump is still running strong I bought a second one just to have in the truck
How’s the pump holding up does it not overheat with it running continuously when you don’t have your hand on the trigger for the pressure washer
Great video Bruh, I'm just setting up my rig and looking for the best simple solutions. I have a question. I have a paxcess electric pressure washer and I can't get the info on what size hose or adapters to buy that will allow me to use a longer hose and other accessories. I bought the most common size suggested M22 14mm 1/4 in male adapter. It was too big for the female connection to my Paxcess 2300 1.8gal Per min unit. Can you help? trying to get a 50ft hose, foam Cannon & short gun set up Thanks
you should look into softwashing
I use an on demand water pump from my IBC tote to my pressure washer. not sure how long your pump would last or burn up if not always water running through it
New subscriber
Hey dream clean mobile great video. You can get a similar pump that is 12v DC and wire it to the trailer and make it run both directions to fill or empty the tank. I could tell you the wiring if you needed it. I am about to build a small setup myself
Hello, can you help me with the wiring diagram?
With a 4K psi with 4gpm, should I buy that harbor freight transfer pump?
Can these pump be used with a 4gpm pressure washer?
Very nice i may have to buy me a water pump. I try to gravity feed it but it takes quite a while to prime.
this gives you almost instant access to water from your pressure washer
wise as the old indeed goodness be with you my brother
Thank you
Love it! Gonna give this a try! Is the water just gravity fed into the pump you got at harbor freight?
No the pump pulls the water out of the tank and pushes it to the pressure washer as well
I would put a Y between the PUMP and the PW and have it recirculate when you aren't using. My same pump gets hot when not in use.
Is there a video what you describing it sound interesting
Great video! could you do one where you test it without the pump and with the pump to show the differences in performance?
Yea I believe I can make that happen
You came in clutch brother I'm going get one today I hope
No problem hope you were able to get setup
How does that lil transfer thing holding up
St. Thomas in the house.
Just a suggestion may want to add a filter between tank and utility pump. Thanks for posting this.
Didn’t even think of this but will do!
I have the same set up but my pump is bigger than that one
@@32sheek what size pump do you have
@@dreamcleanmobiledetailing I was wondering can you burn out the water pump motor if the pressure not running
@@RTECAKETV 1hp 534 gallons per hour
Bro you're video save me some money tks.
Cool, anything I can do to help
What’s the extension nut he uses called ?
Your the goat man i have same washer and just got the same pump man!
Appreciate it bro! Just trying to share some information
Only problem I'm running to now is it' works but it's not a constant pressure it gets weak every other minute
With the pump attached? Unless it’s a bad pump the pump shouldn’t stop pushing water. Here’s how I would diagnose
I would first attach the pump to the tank to where water could enter into the pump and plug it in to turn it on. And watch the water come out the opposite end . If you have a steady flow of constant pressure you know the pump is doing it’s job and it’s something on the pressure washer side
You can check pressure washer by plugging it into a water connect from the house and see if your losing pressure.
Also check on how long your hoses are coming to and from the pump. It may be pushing but loses pressure as it goes through the hoses
@@dreamcleanmobiledetailing i got it from tank to small hose to pump cut it on and it's coming out at a good rate maybe my hose is to long on the end hooking to pressure washer. It'll run good and then seem to run out of water after a few seconds
Cause i see both your hoses are small, my hose on the opposite end of pump going to washer is roughly 50ft it's maybe to long..
Was thinking on using this but what I come to find is this works great but has no turn of it on switch as of now I’m looking at some that once you turn off the water it dumps down once it doesn’t sense any and some claim or say to safe to run dry so I will know next couple weeks how it goes for me haven’t seen any videos like this other than you my guy so maybe I’ll make one to help people out aswell
Yea that’s why I made this video I couldn’t find any videos either
What kind of pump is this
where did u get the cap for the tank were you hook the water hose from
My cap was already on the tank when I purchased it. But if you go to your nearest plumbing retail store they can outfit your tank for you with the right fittings
So when the pump is on, is it building pressure in the line? or is it in kinda like a neutral mode waiting for the trigger to be squeezed? Wondering how long this pump has lasted you so far.
It running continuously but i use a gas pressure washer that has a release valve so if its just too much pressure. the pressure washer will release it. but there's never a delay when i squeeze the trigger
where did you purchase the adapter that goes from the water tank to the garden hose?
Ferguson plumbing supply
What kind of tank is that and how much?
What type of pump is it? Will any water pump work?
Yes bro
I bought that pump but what’s a good outlet for the car to turn it on because I bought a ryobi car outlet and not strong enough to turn it on
We use generators. If you don’t have one. I would suggest using power at your client location until you get one
Where can get that peice that goes on the spout of the water tankthat you hook the hose to
check your nearest plumbing retail store. they may not have this exact piece but they can find the firings you need to connect what you want
i have a community to pressure wash, my question is where can i connect the pump to get power to it? driving an F150 2019 and have an outlet inside my truck..but not sure if i have to run the truck which would drain the gas a lot...
i recommend purchasing a generator
How come you guys on TH-cam don’t list the items with a link for what you are using
What’s up man, I’ve gotten the same setup as you with the water pump and electric pressure washer and I’m having problem with the consistent water pressure coming out the electric pressure washer. It’s barely coming out and I was wonder what I need to do to have the consistent power
Are the hoses coming to and from your pump too long? The shorter the better
If you connect the pump to the tank and leave the outlet hose open (not connected to the pressure washer) plug the pump up and if water comes out strong it’s the pressure washer. If not then you need to check your hoses if they aren’t super long you have a issue with your pump. Unless your water source is sitting on a crazy incline or something
What’s the piece you put on your tank so the 2 spouts can screw on?
www.lowes.com/pd/Yardsmith-Brass-4-Way-Restricted-Flow-Water-Shut-Off/50328287
I have a question do u need a electric power washer if I have tank already hose connected I have a portable power washer
Sounds like you are saying you already have a setup. If you can connect everything and it gives you pressure consistently, i say go for it.
Hey boss! What is the attachment that you have that allows the hose to connect to the tank? I cant find one anywhere.
i have no idea what that exact piece is. what i typically do is take my tanks to the nearest plumbing retail store and have them look at it and they can usually provide me with the best fittings
@@dreamcleanmobiledetailing Thanks bro, I went to home depot and built that piece! Appreciate your video as well!