วีดีโอ

@@fotisbougas_filmmaker I’m not sure sorry, I think you can use a usb dongle to split the signal up stream? Chances are the usb ports on the demands are just usb 2 speed

so in blackmagic land everything is a stereo pair, so madi 1 is inputs 1+2 on the madi signal, madi 2 is 3+4 and so on. which can be confusing.. cause theres 64 channels on a madi line but only 32 on the blackmagic outputs but since its stereo its actually 64. so you cant split the source of madi 1 Left and Right, it always routes in stereo pairs, but you could patch it on the console separately. hope that makes sense

Sorry if this threw you off.. it’s an April fools day joke.. if all your signals are sideways including your outputs that is possible and I’ve done that before, but there is no rotations in the atem unfortubatrly

omg! you are a cruel cruel person ! 🤣😂🤣

Its the meters from the hyperdeck on the monitor out which i cut out and put on screen

@@RyanSomerfield That must be the Hyperdeck Extreme since the Hyperdeck Studio Pro that I have only has 2 audio bars for L and R channels. Do you know of any way I can monitor more than the two channels currently available on the Constellation HD or Hyperdeck Studio ?

@@bittenbyht We have a Hyperdeck Studio HD Plus, when you change the amount of channels to 4,8,16 etc the meters expand from 2

if you are looking for a quick drop any file and play, something like this is great. hypdecks are great for records obviously, but i use them for playbacks that i need to make sure work also. i render them all out first in the format it likes. but touch wood it works every time. if i want to drop in a file quickly and not have to worry about formats etc i use playoutbee or something like ProPresenter

@@RyanSomerfield thanks! I still haven't figured out how to get my pre-rendered content to be recognized by the hyperdeck. I tried the davinci resolve quick export, using the h264 hyperdeck option selected as blackmagic support suggested, and that did not work. What pi do you recommend? Should I get the 5 or 4? Would we need another monitor for the pi itself, or we'd be able to use the same laptop? One monitor is set for our camera multi view, but I think I should be able to use the laptop for the instant replay and uploaded media?

What exactly are you trying to achieve? if you audio is somewhere else you could just enable that there?

yeah so when i work in another venue i typically try and take their internet and throw it in our Wan in on a router in the system. This keeps our networks isolated so there is no cross talk where you dont want it. Its worth chatting with their IT department too to let them know what you are doing. there has been times where ive plugged in and randomly it dropped out because they realised a router was plugged in, some places dont like it.. so being on the IT depts team is always a good thing if you can. you could take wifi from the venue as a wan also but always take a wire where you can. I typically drop in some AP's on our side of the network so we have good coverage where we need it too

@@tobiaslehmann2305 just clarifying , you are trying to output the microphone input from the tv8 to the output madi 1? Have you tried using the webpage linked below? Then restored into the atem again? I haven’t tried anything analog yet so not sure if it works

Hi, thank you for your fast replay! Nope, I want to route a microphone converter input (madi1) to the microphone input, so I can delay it… From this channel it should go to program (1/2)

@@tobiaslehmann2305 ahhhh interesting, havent thought of this use case, theres a good chance this may not be possible though.. because the microphone input is a physical D-A Converter so might be treated differently. but that seems to be an oversight on blackmagics part to not be able to delay that... if anything it should be done on the converter itself..

Just HDMI out, now in my current rig its going in to a HDMI to SDI but keeping it all digital

love it! Hopefully the new update fixes the output changing on the aux and this will be a game changer for sure!

The client purchased it through Ali Express I believe, but was pretty horribly built, had to get it rebuilt 3 times to make it road legal in australia, had a wheel snap off and a bunch of other stuff.. definitely not worth cheaping out!

@@RyanSomerfield Poor buy. When you do such a build inside I guess you want to make sure the trailer you work out of is the best possible built.

i hope so!

@@Andrew_Keller3 you are in luck! It just got released

It is, i have a 10m USB 3 Cable running to a powered hub in the control room which is adding some extra power for the decks, havent had an issue with it

Thanks John! Nice work :)

Hey John! Any update when this prototype will be available to the market? Nice video @RyanSomerfield by the way!!

this video is pretty old now, these days im using Zoom ISO which is only limited by the computers specs, I havent looked into what zoom rooms can do now, but im pretty sure its more?

I believe they are working on that!

very much a case of it depends, zoom has been expanding its limits which is good. but ultimately if you are looking for a 1 way transmit (cameras off, no breakouts etc and not worried about latency) then id look at another platform like youtube etc. but it does do the job, if you have lots of people and want to do lots of breakout rooms with few people you might have to look at multiple meetings which we have done before. the quality should be consistent, but if someone joins on a device that cannot handle 1080 it may push everyone else down which i have had before. but if you are looking for low latency and cameras on etc, then zoom is by far the best :)

@@RyanSomerfield Thanks, Ryan! Very helpful

You can purchase modules and make it however you like, there are presets they sell but ultimately you can just grab the components you like and throw it together in a frame to however suits you

Its pretty solid, Make sure your setup is perfectly balanced, the better the balance the better results you will get, super thin cables for vision etc is ideal too. it can be a little fiddly to setup but once its up its great!

Generally I just let the switcher do it and the cameras get sync from the SDI Return, but if im doing Virtual Production work I use the Blackmagic Sync Generator to sync everything

@@RyanSomerfield thank you for the information!

sadly its been shut down :(

We'd love to work with on this. FluidPrompter can attach remotes to multiple instances of the prompter app connected over the network (like a Cat5 ethernet wire between your spaces). Feel free to reach out via email if you want any help on this!

It does work but the elgato pedal is fairly loud when ive checked it out, would definitely pick it up on a microphone

We could support the Elgato pedal for sure (and already support some other cheaper/louder ones too, like the Moman pedal on Amazon which also has a "click" noise), however, these are all momentary controllers and not analog controllers. Oh and I use the Elgato prompter at my computer workstation with FluidPrompter! (but use a bigger better prompter in the video studio)

Yeah thats probably my biggest request would be wired.. but didnt see any issues once things were up and running though

We have a prototype with a USB data chip onboard. It costs a few extra dollars for an extra chip which bumps up the price a bit more. Would you want both Bluetooth and USB in the same device? Feel free to reach out to us anytime - we love real-world feedback!

@@FluidPrompter For our studio space a hardwired usb only option would be great. We will be testing FluidPrompter in our studio when I get back.

@@MorganHiu feel free to reach out via email if you need anything!

@@yemmyrichard7511 honestly I just plug in the power and pull it when I’m done.. I probably should shut it down but I don’t.. still works fine though!

@@RyanSomerfield Thanks very much.

@@davidlook6670 the zoom room software will output the ndi feeds on to the network which can be pulled from other computer or device, if you are taking about control you can’t do anything on the zoom room computer, it must be controlled by another device

@@RyanSomerfield we will be using an IP camera as the video for the ZoomRoom. Do I need NDI Software on the ZoomRoom Computer - How do I select the camera at IP 192.x.x.x as our video source in the ZoomRoom??

thanks! honestly i didnt use them much.. but was nice to have when setting up to see whats going on

I do love the fact that they are releasing new things for free years down the track making the product more useful which is awesome

@@RyanSomerfield But they didn´t do it right. It´s simple for them to implement an "professional modus" - are you sure you know what you´re doing? - YES... and there´s the advanced feature set like advanced audio routing. Can´t be that hard for them when people are able to "hack" the XML.

Some of the atems have headphone out so you can select the headphone symbol on the bottom which should act as a "solo" to hear what you want

Yes .. on 40 channel atem U have 24 16 channel audio EMBEDERS .. Impressive