วีดีโอ

Great video. I had this problem come up after I disconnected the battery for a welding job. Than immediately after I connected the negative and started the rig started sputtering and rough idling a LOT with the A/C on. I disconnected the battery, removed the 28 and 10 fuses that are throttle related I’ve seen on another video. Cleaned the throttle body completely( without removing it though) I have also been told that there is a chance of busting the O ring behind the throttle. I’ve stuffed a bunch of rags behind the body with the throttle open using the gas pedal trick. There was a lot of carbon buildup around the butterfly. It fixed that rough idling for sure. Thanks a lot for the video I know it take time to make it.

Thanks man

Thanks for this.. about to drop the tranny on my Aztek.. curious if there's any need to support the engine from the top?

Thanks it’s really helpful I did it successfully can you assist me with a wiring diagram of the rendezvous cxl 2004. Thanks

say, did this change the slow throttle response at all ??

Great video

Okay, who made that music?

Sup bud! New subscriber!

I finally cleared that code by cleaning the mass airflow sensor, and the throttle body. I took out the fuel pump relay and put it back but that was not the issue. Nor tapping it. Cleaning cleared the code.

Thanks

Thanks!

Tell me how to remove the rear differential cv joints

Im a girl. But im looking up how to fix for my bf lol so maybe doesnt count

This is what my husband and I are using to change out my #4 spark plug for misfire. We will be changing the rest out next week when I get paid, as well as the coils. I hope this makes her run smooth again until then. I have no choice but to drive to and from work, so this is a bandaid until next week. Thank you!

thanks for the video, You helped me figure out how to do the work myself. and thanks to you, I could see that someone had already made some blows to where the tire is placed

Luv the music mechanics work can be very dramatic...

Very good video.

Outstanding video clear and video very stable not to mention very informative and helpful.

Thanks to your video and one other, I was able to change out my rear suspension for the first time ever on my lacrosse! Appreciate th3 saved money and new pride!

I have to change mine.I'm not a mechanic.I do simple work myself to save money.And this video is the best one that I see.I love the video I love you job.Thank you for your help

Thanks for the info, I'm just about to do the same to my 02 Rendezvous (what a mistake it was buying this car!)

Just took mine out and to get bolts out I used a pry bar to put a slight dent in the spare wheel compartment. Just an FYI for you next time.

Thank you I have a Jeep compass 2007 also and it’s been having trouble the rpms go way up sometimes and then it won’t accelerate so i have to pull over turn it off and turn it back on and then it’s fine someone told me I need to go to an actual mechanic to get it checked and filled but don’t have that kind of money so thank you 🙏🏻

Pull the over plug and see what happens after car isn’t hott because transmission gets thicker with hot

Update to my last comment, after 2015, they changed the design of the transmission on the patriots. it won't look like this and is difficult to get fluid into and check.

You do understand that you didn't even have to take the radiator hose off its 3 bolts

I got to ask, My trailblazer doesn't throw any codes for something like that but it does idle rough and it's like it has some type of upper end noise. It isn't throwing any codes though and the oil is good. I was wondering if a clogged solenoid can cause something like that like the cam is getting advanced and over time it wore out a lifter.

but my 2016 doesn't have that handy fluid cap and tube. It's completely enclosed, with no way to add fluid easily.

My 08 dodge Caliber sxt after driving everywhere always reads 40mm so is that about what other people are getting or does that sound low.

“In this video im gonna show you how to check your transmission fluid…..:but first off……please sub” 🙄🙄🙄🙄🙄🙄

wow! i miss the Taurus platform and all the sedan. would be great if Ford brings this car back to America.

😂😂 always check your nuts

I wet the new one with a little residual gas. But it turns out to be a Fuel Pump. Bring it along to your mech or they will price gouge you. $50 pump now $250

Thanks for the video. I was gonna drop that whole cross member to do the exact same thing lol but nah. Ill do the dent method 🤣🤣

Bent my homies car 💀

What type of oil do u rub on it?

Like the video but what year was that But what year was that Buick rendezvous ? And you were saying something like it used to be a all-wheel drive? Now it's a 2 wheel drive, or is it a 1:06 2 wheel drive? And you converted to a all-wheel drive which one?

Mine is a 2014 jeep Patriot sport and mine doesnt have a spot to check or add the transmission fluid. My husbadj said because its a dodge that they dont xome with it but from your video it should please help

You need a bigger pan bro lol

Yeah, like a few others who left comments I would suggest/ask that you do more explaining of what you're doing each step of the way. It would really be helpful in understanding how to accomplish the tasks at hand. Thanks!

Ok, Haha, you did NOT show the number six removal and replacement; that was the most fun for me, short wobble socket extension, swivel and a few unkind words were required. But overall, you did the same routine, very helpful, thanks!

Hell yeah bro 💪 much appreciated

In fact, there are girls or at least full grown women. Thank you. You’ve explained this well I appreciate it.!

Thanks for the heads up as to its appearance and location, I have a 2009 Patriot

It's 20 below wind chill and i gotta clean mine without a garage to do it in... any tips😂

Thank you for this video. Excellent!

Thanks for making a great vid, very helpful. I'm about to do the same job. (09 Patriot)

They call it junk but i have two Taurus se's that get me where ever i need to go!

Clearly has no schooling or education in auto repair, doesn't even know the names of the parts, hahaha 😢😮

welp, I might be doing this very thing. My pump is singing like groaning wild boar. I know my rack pinion unit leaks but not much I can do I dont think.