วีดีโอ

Change the popprt valve spring every time you change the thermostat spring only plastic piece very rarely wear out. I do the sprong snd thermostat together. 90 yamaha 2002

You have to send them the note paper your doing the math equations on or just the map?

great video. can tungsten jigs be powder coated?

Just got myself a couple with the hole covers. Can’t wait to use them!

Are you running the kicker and steering with the front trolling motor?

So much has changed since running Salmon O Rama out of Racine over 35 years ago. Mono for everything with steel leaders still works for a fraction of the cost on everything.

I have a tip for you when you powder paint your jigs so you have clean hook eyes. I buy sample packs of 2 m/m shrink tube off ebay. I cut 1/4" lengths with a scissors. I'll cut as many as I have jigs to paint. Then I slip the shrink tube over the eye of the jig, heat the lead head with a heat gun, dip the head in the fluid bed and hang that jig to cool. When I get the next one painted I grab the shrink tube of the previously panted jig between my thumb and fore finger and gently pull the shrink tube of exposing the clean hook eye. Of course afterward I bake the painted heads in a cheap convection oven to cure the paint completely. Pulling the paint covered shrink tube off while still warm but not hot enough to burn our fingers is ideal. After they cool completely and the paint hardens you need to scrape the shrink tube off with a pen knife blade and sometimes the paint chips around the eye.

Are they safe to eat ?

thanks for the explanation. I'll be grabbing a couple of these for those warmer days.

Great video fellas and explanation

THANK YOU VERY INFOMATIVE FOR ME , JUST LEARNING.

Thanks

Did this one, and if you fish the Turtle Flambeau alot you are liable to need this repair also, but learned some things. #1 take a picture of the INSIDE WIRING IN head when you first get the top off. #2 if possible when disconnecting the wires leave them clipped in place #3 i WOULD GRAB TWO PAIRS OF PLIERS TO DISCONNECT THOSE QUICK CLIPS, as I have arthritis in my hands and even without arthritis, those buggers were tough to disconnect on mine, though it appears easy peasy on his video #4 be very gentle with the screws and bolts holding the head covers together as I believe these are designed as single use applications. If you force them back in or screw them in with excessive zeal, you will probably strip out the plastic/nylon and then you have a problem. #5 deep 10 mm socket? didn't work for me when I tried to replace the star washers, bring the next size bigger in either inches or mm to get that star washer back on and you need someone strong to brace the back of them when you tape them in. All in all video very informative and at $100 an hour shop time, and shop estimating $400 total cost, i had $160? invested in the housing shipped in 3 days, and probably $20 invested in trinket hardware and gas, as I ended up taking 3 trips cross town to Lowe's to get right size bolts, and star washers and one nut I needed, as I was missing a couple the right size on the side shields(FROM PREVIOUS UNHAPPY INCIDENTS WITH STUMPS AND ROCKS).

Question for you, I'm wanting to start using these flys though it's November 14th,. All the videos I see, people are fishing the flys in the spring, do they work as well in the fall?

I've tied and fished Marabou jigs for 30 years with big success on rivers and lakes in Minnesota. Long time friend that moved away years ago recently tied Buck Tail jigs and has been swearing how good they are for 3 years now ... I tried Purple Bucktail jig head with Purple feathers and some kind of Flashbou and absolutely Smashed the walleye and huge small mouth bass on the Mississippi!! Will be tying bucktail jigs this winter!! Great video as you tie very close to how I tie Marabou. Minor adjustment to material used ... Thanks a ton for this video. <><

thank you for the video. very helpful

Another great video. I’d like to see how you set up the taddle flag. Took me a while to figure out a setup to detect when those 12” walleye hit. Hate dragging around a dink when you know there are bigger fish down there

Great video thx!! I run 8# braid with 8# Floro. I have never tried that wire leader. We catch a lot more Pike than Walleyes. We also always fish all day and quit at 5:00-5:30. Is the bite always way better after dark? The best bite is always best at dark but then shuts down. Maybe we need to stick it out this trip. Thanks!

Great video. I’m near Lake Ontario, might have to try this out

I was gonna get the quick strike rig and big suckers, I'm gonna try this light method too.

Funny, I was fishing a similar rig but much larger for flounder in puget sound. Sometimes it seems like you run into a rig or style that is counterintuitive, but you can't argue with results and it seems like it's a great way to challenge your assumptions and learn.

Thank you for this video! It saved me a ton of money bringing the trolling motor to a shop to fix!

Great tutorial! Thanks for sharing.

Wow you are a winner boss excellent video that was the reason motor getting hot

Having the same problem iam leaning to the poppet valve

You talk to much

Can a person put the flag release on the mini board?

Will we get a signal when it’s overcooling

The heads will always be warm to the touch

where can I get the wickes dodger (your favorite) and martie graw peanut fly??

Just watch a video two days ago because I had an overheat issue at a low idle. Just wanted to say your explanation was absolutely perfect. Answered all my questions and I was able to fix my problem. It was the poppet. I am running a 2000 Yamaha 152 stroke Lol I put the pop it in backwards which intern wouldn’t allow it to open up. I wish I would’ve watched this video before I ordered a new impeller and thermostats but thank you very much. Video was super informative.

I don't have any walleyes in my area (Southern NJ) but I think these flies should work great for my local largemouth bass and chain pickerel! They don't get really big, and the size and profile would probably be just about perfect!

Megatron has been a killer on the north shore of lake superior too.

So I can just run divers if I don’t have down riggers was thinking divers and torpedoes I have a 16 Lund deep v an wanted to know what all I needed to catch fish on calm days

Have you used a white double slick? How's it compare to the crush?

the best ones always make me wonder is it because i always pull a white double crush and a chrome/chrome flashers well. sometimes i think you can pull almost anything and eventually you will get a bite. every year i say i'm going to write down hours pulled with different rigs and never get to it. but my best would be the white double crush with a homemade sort of little boy blue glow fly

Love the content, thanks for helping us guys that are learning!!

Did you do any jigging for salmon?

Can you do a vid of a walk around of your boat and how it’s set up for salmon?

Thanks i will have to check my mercury 150

Hate to say, but I'd throw them back. There are too many toxins and pesticides for your gut and liver. Just saying. Peace

❤❤❤❤❤

❤❤❤❤❤❤❤

100% agree all you need are dipsy divers they are also my best depth achieving tool. I have came to this conclusion that they are my best because i know exactly where they are in the water and i bet if you took a little more time running your stuff into the bottom of the lake the depth "they are suppose to be" you would find you might be 5-10 off with your lead and copper lines those diver curves are only getting you in that range especially if you go .2mph faster with wave surges or thermoclines its especially worse if you are erroring deeper people say salmon with dive down to hit your stuff but it seems like a rarer occurrence then coming up an extra 15ft

such a great video!!! I am for sure going to subscribe!!!

Fantastic video! I fish similar to this in my neck of the woods in Indiana. That’s a lot of fun!

Dude... You rock... THANKS for the detailed overview.

Thx to guys like you willing to take the time out of your day to no advantage to help others. Having sames issues. Hats off!

Awesome video !! 👍👍

I just picked a guys ice fishing gear and he had a swish-rod beeper pole made in Tomah, WI. This thing is pretty cool. Takes a 9v battery and beeps and lights up when you have a bite.