วีดีโอ

Thanks for the review. So, if you’re going to do paint correction for an entire vehicle which will you go with, assuming the paint has lots of correction required?

Great comparison! Rotaries are good, I find they tend to make a bigger mess with the compound / polish. DIY makes good stuff, Yvan has great content. Home Depot had the 15MM M18 Orbital on sale for $249 w/ a battery. Just picked one up because I’m sick of my corded Griot’s orbital.

what’s the dimensions of the labels please

DIRAC ability is worth a lot. Way improved.

Thanks for showing us the diy rotary. Not sure which channels you follow but LarryAMMO and Esoteric Detail are two great sources especially when it comes to paint correction.

Thank you for taking the time to post this video. Quick question: Why didn't you use the jeweling pad for last portion? Thanks

Who would have to hold onto a blow gun all day😂😂

Very cool that you are open to trying new things but I think it’s always best to stick with either a da/rotary and to try and master it before moving to the next thing.

I bought the pressols for just the bottle. I put on the ik 360 sprayer heads and I think they look great. With your help I put on my own labels.

Too much grease in your gearbox. That’s why it’s stopping so fast. The housing does not need to be full to the top. You actually had grease squeezing out as you tightened the hosing basket on the machine. Only should fill it to where as you put the top on the bevel gear gets some grease on the teeth.

If the ring gear fits the pinion gear properly there’s not a lot of room between the teeth for a lot of grease; just a thin layer. What most professional retailers complain about is the quality of the grease coming stock in these machine since most are made in China and the grease often looks like plain Vasoline or very pale thin grease. There are greases available designed for gearboxes such as Stihls gearbox grease for lawn tools which are really designed for a gearbox. However any high quality automotive grease will be better than most of the original greases except in a few name brand brands. For instance Griots garage states that their polishers are all using a high end Mobil grease selected for use in this kind of tool

Jeff, I had to come back to this video..... I had the regular M12 impact forever and upgraded to the Surge a few months back after all the positive feedback about it having more "control". I had always assumed this additional control was in the trigger.... but to my surprise, its actually within the driver. It really threw me off guard. Had a task recently that required a lot of use, and it was the 1st time I've had this in my hands for a while and doing more delicate work. I was caught off guard by what you called the "tapping" of the screw. As a user, it almost feels like when the head of a Phillips screwdriver bit skips and catches again. It really thru me off guard; I thought maybe something was wrong with the tool. After a bit of internet searching, I really didn't find anyone describing this feeling. I missed your description of "tapping" the first time I watched this video. It's going to take a little while to re-train my brain that the skipping/tapping you feel does not visually translate to a skipping bit.

Just changed my transmission fluid on my Honda passport. Noticed there were 2 plugs. Released both to drain the fluids. Noticed a different color on both. Do these vehicles have front differentials?

Hi There🖐 FLEX makes a great cordless rotary polisher. Cheers!!..😎

Thanks for posting good content. A couple of suggestions - 1) I would slow down your arm speed while polishing. As fast as your going it's more like the equivalent of 2 section passes instead of 4. 2) It would be great if you can pull the camera off the tripod so we can take a closer look at the before and after results instead of you just trying to describe the results.

Good job. One suggestion to make it easier, use the trigger lock, and hold the machine less.

Thanks for sharing all this knowledge

Dude, why are you sniffing that pad? Creepy

Are they difficult to use? I noticed you were considerably out of breath @12:14

When it stars to pull or push itself raise it 20degrees to finish your cycle so it removes that jumping when your cutting 1300-1500 rpm

I hope the new version matt has been talking about works out. I got 5 pressol last year and they have been very unreliable and I struggled to get the og labels on so they don't even look that good. I will probably wait and see if the new version is better and upgrade at some point.

Ahhh Yvan sending everyone rotaries now

Damn bro you got all the Boujee equipment

every time i buy stuff from OG i throw in a handful of extra tips. cant wait for metal ones!

The mini-marolex (500ml) over the iK mini for size and feel for the win, IMO.

I am possibly the only person in the world who refused to buy Pressol bottles because I think they are the ugliest bottle ever made. I did buy the Marolex bottles and have had pretty good success with them. I have had 2 failures over about 3 years. The tips quit on TarX within a couple of years and Citrol will kill a tip within a couple of months, at most. When I use either of these products, I've been trying to clean the sprayers out with water before putting them away. I am not sure that is helping yet as I don't always remember to clean out the sprayes. I just bought some Tolco gold sprayers to test. I have high hopes they will help.

My Pressols have been all good and no problems….but I don’t use TarX

Utterly ridiculous. Expensive. Completely unnecessary. All things I think about the YETI setup. Also, the very reasons I'm going that route. I might just get the Grit Guard dolly set, but those 4" casters do look appealing.

Appreciate the thoughts on the sprayers. I'm probably going with IK variants mainly because I like the look better and can get them faster. First world problems and such. 😂 Take care bud ✌🏼

Really wanted to like the Pressol sprayers but I bought four of them and have had issues with three. I heard Matt saying something about stainless tips being offered soon but if that is what it takes for Pressol sprayers to work I’ll just stick with my ik sprayers.

Thanks for sharing the difference with the bottles. Have Ik's and haven't ran into a single issue. Will be picking up a pressol to test out this week. Also the ik bottle is not 500ml 16.9 oz) it's actually 591ml (20oz). Great short video.

I hope you are aware that the whole “honor the source” idea is a complete joke. You know this, right? Why would you feel the need to do that when the guy it’s coming from doesn’t even follow through with it himself?

How do you clean the inside of the bucket? Poor design.

Rubbish😂

Thanks for taking the time to share and make a video. Thumbing-up 👍

Ideally, you want a dark color for a test panel since it will show the defects and the after results much better. A white colored panel is really hard to show swirls and defects on camera.

Personally I am enjoying the longer format vlogs! I can imagine they take quite some time to edit and get uploaded but the value I think is there. Overall seems you can knockout quite a few small things in one video while still making it a very casual/organic type of watching experience. Nice job and thank you again for the content!

Looking forward to your solar set up I think that has huge value imo. Of course I love to see your product reviews on polishers and I’m considering adding a rotary to my line up for home use.

100% agree with staying away from Samsung for the refrigerator. Mine lasted 13 months.

Hey Jeff, I brought my first polisher in my life from Obsessed garage MIRKA 3" cordless angled random orbit polisher but I got the 2.5 Ah kit! Going to do a 2 step on a 2001 Toyota Solara convertible. I watch your video about the batteries weights on this polisher 2.5 Ah vs 5.0 Ah . I'm think of getting LE A1000 1 inch cordless polisher after your review videos! Naples, Florida Here! 😎

What are your used paint colors?😊

The V2 model also has a nicer speed dial and probably small other improvements in power and internals.

That Dewalt impact works very well 👍

NOCO Boost Plus GB 40 is now $75.96, down from $99.95. I ordered one through your link.

Did I miss it, can you go over this at the next wash with a drying aid w/o issue?

I've never had issues with P1; but, I've never used it on protected cars. It works great on unprotected paint, and even on coatings that have lost some beading. I'm thinking it could be a compatibility issue as mentioned above, it could've reacted to Drying Aid, maybe? I wouldn't use any spray and rinse sealant on a car I'll use a drying aid on, anyways.

It may be a compatibility problem for you. I used P1 on a white car and was impressed with the water behavior afterwards. I didn’t notice a haze but then it’s hard to see imperfections in white. I also liked the wheel cleaner but agree it’s not the best value. Nice thorough review. Thank you.

I think what your trying to say is the product sucks

well now you tell me after I just bought the high output XC5.0 M12 for my right angle impact yesterday

The question to me would be is it that much better than Solution Finish at twice the price in a significantly smaller bottle. Thanks for the video 👍