วีดีโอ

I just read to click all of them on the left😅

hi I cant see exactly how you put it back together because your fingers are blocking a view of the parts ....any chance you could do it again or draw a wee diagram please many thanks indeed

Ronin rs2 error code 1014

Does the timing belt have to come off for just thermostat replacement?

Hernandez Elizabeth Brown John White Melissa

When I put the red button back in, it pushes everything too high for the faceplate to sit flush. What am I doing wrong?

KILLER EDIT!

Amazing!!

How many 5 gallon buckets of paint did you use

Some usg have tabs on the left....jussayin

What brand did you use , I’m currently looking at new cardone

How did you take the panel off?… just rip it off?

thanks bro you help me a lot

You sir are a life saver..thank you in 2024🙏🙏🙏

And this is the "slow" version of the Model S. Consistently pulling sub 11sec 1/4 mile runs. Amazing!! love this car. What many non tesla owners dont know is that these cars have modes that tame all that speed. This same car in Chill mode doesnt do the sub 11 sec 1/4 mile. In Chill mode it greatly reduces the speed to 60MPH and 1/4 mile times. BUT at the literal swipe of a finger you can put this thing into Insane mode and now U are spanking BMW M4s, Mustang Cobras, Etc with ease. Then pop it back into chill mode and it feels like a 300HP V6 instead of the 670HP EV that it is. Its like having a heavy turbo charger on tap whenever you want it. And still get an average of like 120MPG. crazy!!

I have same laptop with rtx 3070 6gb and its giving me $ 0.15 😢

Thanks for making this video man! Helped me a lot!

Wow seriously, so you hire someone who sucked and played it out wrong. So because of your mistake you gonna charge the customer more to fix it. You're a hack

Brrro. You're fired.

Hi when some one make mistake to fix how to correct it without brig it dàwn

Dewaukee life

You should have made a whole separate video of how to put in a t-bar system. Even though you did not mention his name, saying that your buddy messed the job up is disrespectful towards him. You don't teach people by putting somebody else down. It's good to use somebody else's mistake to teach people but not the way that your doing it. I honestly think that you owe your buddy and apology if he's truly your buddy.

Well done!

Cual es la medida del ajuste de los pernos

At 0:38 seconds what sensor is the harness connected too on the left in the video

friends don't let friends do drop ceilings

You gained only 40-60 from fbo and a tune? Yeah no. Those are intake-exhaust manifold numbers.

Thanks for the video. The issue seems very simple to repair. Perhaps a stronger spring would prevent a future recurrence?

What are you screwing the lip to? Are there holes already there on the car to connect the lip?

About how long did this take you? Need to do mine myself and want to try and plan it out. Was think about two days…doable or longer…?

Thank u bro,,, u solved mi issue❤

Hanger wires are supposed to be directly above the mains. Not pulling in a certain direction. Lazer them. Then put a lazer on the main. Put in all the cross-t's in the first row along the wall. Keep the lazer on the main. Screw a small 2inch piece of wall molding ( L ) into the wall and into the cross t. Now the first row is locked in and everything is solid. Nothing pulling in any direction. Perfectly straight

what is the.point of the video if it is not for DIY?

Need some more light

Mine needs replacing on my 2004 Sienna with 162K miles. Clunking began a few months ago but was mild and only seldom. Yesterday it was VERY loud when turning to the right and I noticed a strong pull to the passenger side until I turned the wheel left, then the pull was gone. As soon as I turned right again, same thing. Big clunk and pull to the right. Toyota wants $2500 to repair. I think that's excessive. I cannot do this myself so I must find another alternative.

How high did you lift the van off the ground?

Get her out of that car. She is an embarrassment.

Why do you still use a sillicone on the water pump?

sr that I have to disconnect to change only the sprocket mounting bushings. thank you

Clutch! Thanks for making this video!

Man great video! yup my gimbal was on a night stand in locked position with my camera on it close to my bedroom door, opened the door hit my guitar with case and knocked over my S with my camera on it bam hit the carpeted floor it knocked the little spring on the same lock as this video out of place. Fixed it in 10 mins and saved me $$$$$. Will be taking my camera off the gimbal when not in use.

Mistake 1: doing a drop ceiling 🤮 😂

Great tips 👍🏾 maybe he’s a beginner and his phone died so he couldn’t look it up 😂 but seriously, great tips! I probably would have connected it and had to redo it being a beginners and all.

Part 2? Because I’m getting this started and need an idea how to do it.

what about the base pivot?

Few things to help. With wires, they need to be no more than 4 foot apart. If you start 3’ off the wall then 7’ then 11’. At 11’ you’ll have a wire at the joint of the main to keep from sagging. Level the ceiling with your laser. Hang it on the wall angle and drop it to 2” if you need. Use a magnetic laser card and stick to grid and Jack the wire up or down to keep 2” all around or whatever your laser is set at. Always stabbing to the right side is correct for most grid like Armstrong Solutions. While USG grid stabs to the left. And old style hook grid you have to hook it from under the grid then hook other side. Too get a correct split, say the room is 12’ wide even, that would be an 8’ foot split. Or 4 full tiles in the middle. Measure off one wall 8’ and make a mark. Measure from the other wall back to your mark and split it in half. That’ll be your border. using 15/16 grid you can set a string whatever your border is + 2’ + 1/2” of the longest wall. You don’t need a main on starting off your border when you can start it border 2’ and cut 4’ tees by scribing the string. There is a lot more too it lol. Main thing is staying square 66 3/8” for 4x4, squaring between mains. and 52 1/4” for 2x4. If you set 2 strings one on your first main and one on your edge of border tees you’ll only need to check square once because you have 2 square lines. It’ll have to stay square.

Nice color ,well done job! 👍

Where you get the lock pieces

Where's part 2

Hello my friend, can you help me to find a black kit axis lock inside to replace old kit Where find it ?