วีดีโอ

Follow up question, I would like to use one of the units on a front swing gate, all looks good however my gates don't perfectly close (a bit flappy/loose) so the reed switch would not work.....is it possible to just not use the reed switch if I am not fussy about if the gate has been left open/closed?

Do you know if it is possible to 2x units and they show up in CarPlay? One unit would be for the front gate (where I still have a good WiFi signal) and the other in the garage.

I with someone sold these devices. Very neat stuff.

great video , thanks so much , shelly should sponsor and link to you !

Thanks for these. Can I use resperry pi 4 or 5?

Thanks for the videos! can you give us 1 year update on all your PetKit products and how they have gone, and any learnings?

Can the physically switch be a rotary dimmer?

Can you send files to the recycle bin when deleting from network drives?

Thank you. After hours of research (Meross is really very complicated!), in 5 minutes the integration of my 3 Meross components was done. Greeting

What a bright 🔆 idea 💡 😂😂😂

Hi I need some help @ 34:40 in the video when I check the overview tap I do not see the device/devices I added to the configuration please help anyone thank you I do see the esp32 devices setup from mqtt but not my devices I'm trying to track like (phone,tablets,etc...)

I don’t have any of those scene options in the nanoleaf app for some reason. I keep seeing people make scenes but I don’t seem to be able to get it to work

Thanks for making this video. I went to IKEA one of their new motion sensors (works great with Home Assistant) and spotted this. I hadn't noticed them before. Considering getting one!

how i can attch 2 set same desgin t1000s

Oh!! This is very interesting. Can this be integrating with voice assistens x Google Assistant?

hi as you know omxplayer not anymore available , is any other option to make it work ?

Same for me, can't work out how to tell it to go and clean a particular zone.

thanks for the mqttexplorer suggestion, I've never thought about a similar tool :D

Hi, I have a request. It would great if you could do a video on how to set the set of a LIFX light without turning it on, using Home Assistant. Set State looks to be available but cannot figure out how to get it to work. Thanks

I have struggled to integrate matter over thread Nanoleaf light strips into HA.

Great vid. My knowledge of boarder routers in HA is not great. I recently switched from ZHA to zigbee2mqtt on my HA yellow. Only way I could make this work is by uninstalling the multi- protocol firmware so i lose thread / matter support (this is not documented anywhere!). I don’t know is newer HA updates have changed this. But I would like to have Matter and z2mqtt working together on my HA yellow!

great video on VM install for unraid. Thanks.

This is an awesome channel mate. Love your content.

What is the updated image to downdoad from github? Now thats its 12.1 I see a similar named file: haos_ova-12.1.rc1.qcow2.xz

Lifx is the worst, CONSTANTLY "gone dark"....you'll get used to that phrase.

I got mine on a sale last year, which is about 12 months after you did this video. I paid AU$999 new, I think I was very lucky. Sadly though, to take advantage of the 120Hz refresh rate, I will have to update my MBP M1 Max. Other than that, I am finding this size to be the new standard for productivity.

Might not be a good look to run a continuous animation in a significant area of the screen just jumps all over the place when you edit your talking head. Quite jarring.

This is really really good. Thanks!! I think you could also recommend some cameras (common ones like Reolink CX410) and show to to step up and also access from mobile. It would be the best Surveillance set up in youtube. Thanks again.

HI. So I set up one of my plugs to turn off when I leave, and turn on when I come back, and it's working fine. What I can't make work, is to do the same for the other phone in my household, to turn off the second plug. In other words, when I leave it shuts down my room, when the other person leaves it turns off the other room. It just doesn't work for the second phone.

Thanks great … can i use this also with the rasp pi zero2 w with the cam v3

Thanks for this. I run a 60 device strong ZHA (only) network via a Sonoff Zigbee 3.0 USB Dongle Plus. It's been a flawless radio with great range, long antenna and extended using a USB cable away from the rack. Some of my more important devices don;t do MQTT so I need to stay with ZHA> I am still uncertain how to add thread/matter. Is it best to migrate to a combined stick like the NabuC one you have used here? I still don't even know whether migration upgrades are needed (into the future)...simply due to a Sonoff stick like the one I have becoming end-of lifed or unsupported with ongoing firmware etc ? So do I wait for the release of a new combined Sonoff ZHA/Thread stick? (If so, which one)? Or do I leave what I've got and simply just add a second matter stick? There is never any manual on this zigbee stuff.. just trial and error. Nobody lays out any "best practice". You learn what works trial and error as you go. I'd appreciate your comments on which is the best path to take to upgrade to the ability to add thread devices in the future. Thanks

Thank you for the help and step by step tutorial, i finally can do a proper use for my old raspberry pi 3, a tip if you are having troubles with video streams / codecs from different vendors, try to use always h264 instead of h265, also video source resolution should be minor that the monitor total resolution, so in that case you can use 2nd stream source from cameras if you have a high resolution survelliance video camera

I have negative too - the lights are damn bright. If you need a blacked out room at night this will annoy you. Edit - thanks for the video!

Does it connect back to the wifi network automatically once the power goes and comes ?

I made a video for people with adhd. Proceeds to make an hour long video😂

Awesome! Thank you for the explanation!

About those fingernails.......

I dident learn anything from this ok you no what you are doing but you did not run it past us rubbish sorry just rubbish

Just separate the internet of the devices with the one you commonly use

This plug is not good at all. After being plugged in for a while, it gets very hot, too hot to be considered safe. I have never had a plug that gets this hot after being plugged in. I don’t dare to use it any longer than this. I don’t trust it at all and feel unsafe.

This plug is not good at all. After being plugged in for a while, it gets very hot, too hot to be considered safe. I have never had a plug that gets this hot after being plugged in. I don’t dare to use it any longer than this. I don’t trust it at all and feel unsafe.

i am thinking of buying them . but i have a question ... do they work with 2.4 ghz wifi too? i only want to connect them to my iphone

lone wolf from Australia presenting home assistant videos thank you

thanks

Very interested in content like yours, and subscribed! Having said that, the scrolling text in the background is too distracting for me to actually watch the video - have to simply listen to it. 😅 Any chance you could remove that in future videos?

hi sir any idea can it add to homekit ? via HA

I had a feeling you were going to use the RGB to flash blue and red like a police light on motion.

I really Got Alot Of Help, And Information, From Your Video. MORE Than I Recieved From Other People, Filming Their Video's. Thank You For Doing This For Me, And Other's, Who May Need To Learn, By The Visual Tools That They Have At Hand. Thank You! Rick C.

Why not just install landscape lighting? Because the low voltage transformers (they are powered through) have dusk/dawn photocell sensor and timer functions to make their operation effortless. Plus you get the added benefit of adding to your homes curb appeal and your cameras won’t have to readjust all their optical sensors and value settings to try and capture a clear and balanced image each time there is a motion sensor event. Also...... people are less likely to mess with properties that have landscape lighting that might put them at risk of being spotted in the act, or identified afterwards.