วีดีโอ

Brilliant thanks cool stuff

Very Nice Video ! Many tks From Austria !73 de OE5POP

Thanks I am looking at both.

Went along and ordered a FT-891, your videos are among the best on this rig. Once again thank you.

You show how to set the RX levels but said nothing about the TX levels. I noticed that your ALC in TX was about mid range. A lot of people get heart burn if there is any ALC level at all. What do you recommend and why?

Great video, looking forward to seeing some more on the FT-89. Thank you

Nicely done!

How do you fit all three of the displays on the screen? I'm using a 14 laptop.

Hi Tom. Really good video. I am trying out FT8 but don't own a computer. Not everyone can afford a computer. It would be great to see another Ham just using an old phone and a cheap radio etc. Video etc. Ps I don't own a Tablet etc. Cheers from George in the UK.

I took a class in public speaking about 40 years ago and chose the topic of ham radio. I had the class attention when I started by asking "What do I have in common with these people? Barry Goldwater, King Hussen, Arthur Godfrey, Tex Beneke..." I continued by demonstrating with my 2 meter HT calling up hams on repeaters well out of range of line of sight VHF. It is now 52 years I got my ticket. VE7ATU

So...I have been using cluster information on log4om2 seemingly automatic. What I don't understand is that I once upon a time had the ability to spot someone and now I don't. I have come to realize that you must register with a 'server' or ham that will enable this, but the instructions I received from the ham was not clear in how log4om2 gets changed. I didn't change anything or enter the hams telnet address. I am not even sure where to enter that information. I probably need a basic understanding of how the cluster system works on log4om2 in order to make heads or tails of it so I can have enough knowledge to proceed. Any suggestions??

I’ve tried 20 mice on my dx10 but my ft710 works no issue

Great video well done!!!

This is KC9TZO, working contest with SM ROCKETS TEAM, see in the log, good luck.

Tom … while interesting this isn’t helpful in that each of these applications has its own set of settings that must match what’s been chosen here. FLDigi, JC8CALL and WSJT-X need to be configured in such a manner that these settings above actually function. On top of that some of these vary by the band. I don’t see for example the setup for FLDigi that matches these radio settings for sending via FLMsg over say 10M, 6M and/or 2M FM. Did you do a video on that as well?

Hi Tom, liking your videos a lot, I have a DX10 and would love to connect my Nino TNC to it and upset forPacket radio, i cant find anywhere the use of the DX10 or the 991 A for packet , any chance of setting up for Packet, 73 Brendan de GM0CQV

Poor planning in my opinion..International Beacon Project..This has been around since 1979. Frequencies are: 14100, 21150 and 28200. 24 hours a day, 365 days a year. My own 10m beacon is on 28199.5 Also, that tramples on phone frequencies used in Canada. Phone operation is permitted below 7125 on 40. The Trans-Canada net has been on 14140 for decades. These are USA frequencies you are referring to, not North American.. VE3IIM/VE6PG,

HELLO TOM , 👋🍺🍺

Very nice video.

I have a pro 7 with 7300 but wanna use headset on my anytone 5555n2 what adapter should I use

Good tips.

Tom, ND3N, the talking Operator's Manual... BZ, Tom.

Excellent video, Tom. Thank you.

there are a lot of rude operators on FT8. Take place on my slot and don´t work split. Replay the CQ call on my slot and don´t go away after the qso is done. Sometimes the best thing is go qsy and make a SSB QSO. 73 Joe DH1KJ

Clear, to the point... how refreshing, thanks Tom de ve7kkq

Have you got these settings for the 781 mic

my IC718 is not listed is there one I can use

Wish I had found this sooner!!!

OK, so I know some more, so I’ll make a list and send it to you soon! But I won’t check it twice, not even once… that will be your job! Fun stuff, and I enjoyed it a lot! Thanks…

Thanks for video and your time.new subscriber from uk 🇬🇧

PRC on or off (tx audio processor) is channel setting specific with memories, yet RT systems has no column for PRC in the memory channel editor screen (not in radio settings either). I reported this to them and I hope they add it soon.

Tom thankyou for the teaching. New Newbee like myself, this is Priceless🎉❤ 73s 9V1KM KK7QGL SINGAPORE

Thanks Tom! I am setting up the FTDX10 and will do these steps first. All makes sense!

Thanks Tom for another great video on the 991A. You've been a great help!!

Thank you Tom. Your video was very helpful for setting up my new FT-dx10. I'll be listening for you on the air. 73! de N4ZOO

Thank you very much for this instructional video! I just unboxed my new FTDX10 yesterday, got it set up and operating, and then used your video to set up WSJT-x. Everything works like a charm. Thanks again and 73! de N4ZOO

Thanks again for a great video.

I been an FT-891 user for 4 years, been using it strictly at home for 95% CW and some SSB. Though I use it as a basic rig, it has lots of features, maybe too many for me. I like it for CW use since it has filtering I can choose. Love the small footprint, and the readout though small, has a nice, readable frequency readout, no problem there. I think many get put off by its size, but I see that as a plus since it won't take up lots of space. Hooked up to a small ATU and I'm all set. Good receive and I get complements on the TX audio. I have been collecting and trading HF rigs for decades, this one is my go-to rig within the last few years. I can't speak for those that use digital modes and such, I simply operate CW and some SSB and it is a wonderful all-around rig, no complaints, great for what it is and the price is a plus.

Wow this was a lifesaver for me! I’m new and had the FT-710 and WSTJ-X on my MacBook… but unfortunately was limited by the unavailability of Mac ham software. Muddling through the driver issues reminded me why I left PCs for Mac years ago. I still hate Windows, but your video made a huge difference in getting things to work for me. Thanks for the amazing instructions!

Very useful info. TNX

Well the WSJT-X, GridTracker, and N3FJP ACL didn't work here. ACL tells me normally only one connection is allowed.

Tom, I’ve worked through the settings and cannot get CAT to function. The audio settings work fine. I’ve tried it with two different PCs with the same result. Any suggestions? KR4VT

I heard this on the radio today but didn't know the details. Thanks for explaining it!

Thanks…😊

In the most isolated and remote parts of the World People rely on Amateur Communications.

How is the audio? I am selling an FT-891 because I just haven't been able to get the audio right, it's too tinny.

Tom, thank you for the three "bite sized" videos that are excellent for giving a consice summary for their software. Otherwise, we have to wade through interminable gassing by the well-meaning creators. Excellent job.

Yuri Gagarin was not UA1LO. It is wrong information circulating internet. And Joe Walsh was not the founding member of The Eagles.

Tom, I really appreciate your videos on the 991A. You do the best job of all the TH-camrs. Thanks.

Tom, I followed your TS890 to FT8 video, and got that working fine. I am trying to get HRD working now, and used the built in port connecting in HRD, and it almost does it. Everything works, except the rig goes into transmit when they connect. I made sure I did not have vox on, and even unplugged the mic, but still stays in trans. If I turn the rig off/on, it seems to be ok. During your TS890 video, while covering the ports, you mentioned that under the Advanced setting, on ports 17-20, that 19-20 would be used in HRD, but not details. Could this be my problem?