EP3Stuff
EP3Stuff
  • 9
  • 172 975

วีดีโอ

EP3 How To - Fit Brembo BBK Big Brakes + Calipers - EP3 Civic Type R - K-system.pro
มุมมอง 11K7 ปีที่แล้ว
How to fit Brembo calipers and bigger discs on your Civic Type R EP3. This kit is from K-System.Pro using Renaultsprt Brembo calipers and 350Z 324mm discs - Find it here - k-system.pro The fitting and theory is the same for any BBK, Brembo, Spoon, DC5 Brembos etc. Please always read instructions carefully and get your brakes checked by an expert (they're pretty damn important!)
Civic Type R EP3 - HOW TO - Fit a HID/Xenon Bulb Kit - H4 Pre-Facelift 5000K Bulbs.
มุมมอง 16K8 ปีที่แล้ว
Another quick how-to on fitting a set of HID/Bi-Xenon bulbs to improve the lighting on your EP3/EP2. Sorry for the couple of times I said 'drivers side' when I meant 'passenger side'! Bulbs from this great site: www.aurorabulbs.com/
EP3 Civic Type R - HOW TO - Remove/Refit your Centre Console/Fascia - Fit a CD Player
มุมมอง 11K8 ปีที่แล้ว
EP3 Civic Type R - HOW TO - Remove/Refit your Centre Console/Fascia - Fit a CD Player - I made this over a few weeks as I had to take get it all painted. I did use a spare fascia for painting so I could still use the car!
EP3 Civic Type R - How to fit a shortshift/short throw gear linkage.
มุมมอง 27K9 ปีที่แล้ว
I've just fitted this TSS Tuning shortshift that I bought from eBay Germany. If you look for them, the picture they show isn't the right one. £44 delivered which is a bargain! Throw is much reduced, gear changes and slicker and smoother too. Very impressive!
EP3 Civic Type R - FRSU/Geometry/Camber Arms/Camber bolts - HOW TO Setup Your Handling.
มุมมอง 12K9 ปีที่แล้ว
How to fit Hardrace camber arms & Powerflex camber bolts along with how to setup your car for sweet handling. Final settings for the suspension were: -1 degree negative camber all round, 0.05 degrees toe in all round (total 0.10 toe in front and rear). My tyre choice is my own, I just love Toyos!!
EP3 Civic Type R - How to fit a strut brace + engine bay mods and drive footage!
มุมมอง 10K9 ปีที่แล้ว
How to fit a strut brace to your Civic Type R EP3. Also bonus footage of my new engine bay modifications and some quick drive footage on a private road!
EP3 Civic Type R - How to change your Steering Wheel.
มุมมอง 37K9 ปีที่แล้ว
How to change your EP3 Civic Type R steering wheel. Wheel retrimmed by royalsteeringwheels.com
EP3/EP2 Civic Type R -Front and rear speaker DIY installation HOW TO.
มุมมอง 49K9 ปีที่แล้ว
How to fit new front and rear speakers into a 2001-2005 Civic Type R EP3. I used the following. Autoleads PC2-818 wiring harness adaptor and Autoleads SAK-2902 speaker mountings. Dynamat Extreme sound deadening. Alpine SCE-1725S 16cm speakers.

ความคิดเห็น

  • @lethalcabbag3
    @lethalcabbag3 9 วันที่ผ่านมา

    Is this droney at all at motorway speeds?

  • @rayyansamet7016
    @rayyansamet7016 28 วันที่ผ่านมา

    and does the headunit have built in amp as I have aftermarket alpine headunit so I won’t need a extra amp to have what you did right

  • @rayyansamet7016
    @rayyansamet7016 29 วันที่ผ่านมา

    The headunit has built in amps right so nothing will burn when changing speakers, my question was did you wire the front speakers with the adapter the exact same way you did with the back thanks

    • @EP3Stuff
      @EP3Stuff 29 วันที่ผ่านมา

      @@rayyansamet7016 correct, yes all wired the same way 👌

    • @rayyansamet7016
      @rayyansamet7016 29 วันที่ผ่านมา

      @@EP3Stuff and does the headunit have built in amp as I have aftermarket alpine headunit so I won’t need a extra amp to have what you did right

  • @RichardG98
    @RichardG98 5 หลายเดือนก่อน

    What's specs sounds great

  • @fewhavestrength
    @fewhavestrength 5 หลายเดือนก่อน

    oval mid section?

    • @EP3Stuff
      @EP3Stuff 5 หลายเดือนก่อน

      No, just the standard 3 inch round centre section! 😎

  • @jamestractorboy1827
    @jamestractorboy1827 6 หลายเดือนก่อน

    Front should be slightly toed out, 1mm across the front, 0.5mm each side = 1mm for fast road setup...👍

  • @bucketheadothers2384
    @bucketheadothers2384 ปีที่แล้ว

    Just out of interest, where did you get your grille from? Thanks

  • @bucketheadothers2384
    @bucketheadothers2384 ปีที่แล้ว

    It's ok, all sorted. Thanks for the video

  • @bucketheadothers2384
    @bucketheadothers2384 ปีที่แล้ว

    Hi there, thanks for the helpful video. I've just done this job on my car, but there is no connection on the one side for the small wire to plug into. Any ideas? Thank you

  • @numelung1337
    @numelung1337 2 ปีที่แล้ว

    Can i put better speakers on the stock Honda radio? If they are much more loud capable, will the radio struggle or just work at max, but the speaker itself not maxed?

  • @iCOGNiTOSHiNOBi
    @iCOGNiTOSHiNOBi 2 ปีที่แล้ว

    What did you do with the cigarette hole option ? Usb?!

  • @typeRF20c
    @typeRF20c 3 ปีที่แล้ว

    Hi, so on Accord cl7, oe 17in wheel with spacers is ok ?

  • @MrPeteRR299
    @MrPeteRR299 3 ปีที่แล้ว

    Do you upgrade de brake master cylinder ?

  • @Jaanzter
    @Jaanzter 4 ปีที่แล้ว

    Ehhh, why didn't you show it properly when removing a rear speakers panel?

  • @kristupasa4626
    @kristupasa4626 4 ปีที่แล้ว

    Mldc ble

  • @sammybaker6872
    @sammybaker6872 6 ปีที่แล้ว

    Have you had any issues with getting it through an MOT?

  • @BrettCahill
    @BrettCahill 6 ปีที่แล้ว

    I followed your instructions and now I have a cup of tea

    • @EP3Stuff
      @EP3Stuff 6 ปีที่แล้ว

      You win at life. ;)

  • @russell164
    @russell164 6 ปีที่แล้ว

    Good video.. what braided lines did you use? And where can you get them?

    • @EP3Stuff
      @EP3Stuff 6 ปีที่แล้ว

      Hi mate, sorry for some reason your comment got held! They are HEL lines, you can get them on eBay etc. Good luck!

  • @matthewn2050
    @matthewn2050 6 ปีที่แล้ว

    Haha love this

  • @teamvtec
    @teamvtec 6 ปีที่แล้ว

    So this kit will not fit if you're running OEM 17" wheels?

    • @EP3Stuff
      @EP3Stuff 6 ปีที่แล้ว

      Hi mate. Sorry your comment got held for some reason and I missed it! If you’re running OEM wheels you deffo need a spacer!

  • @truballr32
    @truballr32 6 ปีที่แล้ว

    Love these videos man. I'm going to restore my 05 ep3 to brand new.

    • @EP3Stuff
      @EP3Stuff 6 ปีที่แล้ว

      Hi mate. Sorry your comment got held for some reason! Good luck on your restoration mission, I’d love to have the money to rebuild mine bolt by bolt one day!!

  • @Marcelocuts
    @Marcelocuts 7 ปีที่แล้ว

    Intro is super cool

  • @liamstimpson8537
    @liamstimpson8537 7 ปีที่แล้ว

    I fitted one of these today - what an arse of a job! So fiddly and inaccessible! Thanks for the video, no way I would have figured it out without your instructions

  • @erickgutierrez5798
    @erickgutierrez5798 7 ปีที่แล้ว

    Do you have a video on how to fix interior door handle? My door locks and open with remote & it opens and closes from the outside but inside door won't open

  • @Vtecinside57
    @Vtecinside57 7 ปีที่แล้ว

    Hello, what are the dimensions of the rims (width and ET). Thank you

    • @EP3Stuff
      @EP3Stuff 6 ปีที่แล้ว

      Hi mate, really sorry but your comment got held and I missed it. I honestly can’t remember. You could find the info on www.rarerims.co.uk. I think they were 17x7.5 ET45.

  • @avinciipan
    @avinciipan 7 ปีที่แล้ว

    Super video, with how much NM have you tightened the screw on the steering wheel?

  • @avinciipan
    @avinciipan 7 ปีที่แล้ว

    Hello, nice video Thanks .... What is the driving behavior after the conversion? Can I even just install the front of the camber adjustment screws + take your values? Or is it advisable to make the conversion front and back? Best regards

  • @frettsfhotos
    @frettsfhotos 7 ปีที่แล้ว

    Hiya, Regarding the front door speaker holders did you have to modify them at all? I have just brought the exact same ones shown in your video and was wondering before installing them. Cheers Will

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      Hi mate. No I didn't modify them at all. They fitted quite well. There's a comment below that has a link to the proper Civic fitment ones if you'd prefer to get them!

  • @WelshyAutomotive
    @WelshyAutomotive 7 ปีที่แล้ว

    Just bought an EP3 Steering wheel for 100 bucks!

  • @8281MATT
    @8281MATT 7 ปีที่แล้ว

    If Ur Like Me , Low On Ends, Live Below Poverty Level... FUK BUYIN SHIT YA DNT NEED! 🖕💰On those speaker pods❗ 💥 TheRE IS ALWAys A ByPass. Even LIFE Im on A 1way Dead End Street 2 Nowhere.💊💤... Cut A Path Thru Tha WOODS❗#KYRAISED💯● #LifeHack 💥 🚨 Use Tha Speaker rings Tht Comes With Ur Replacement speakers, They Make A Great Shim IF YU Using A 5x7"❗GOTTA Drill Em full more Holes & Mount Em straight Thru Tha Door ,FukIT 😂 ⚠5x7" & 6.5" / 6 1/2" THNX 4 POSTING BTW 💪💯 MY CUZN JUS GOT An 04' Si Hatchback.. Now I CAN name my Price WHN He Decide 2 UpGrade Them Factory PaperCone Voice Coils 2 Sum Bump🤘 ✌

  • @mushy18100
    @mushy18100 7 ปีที่แล้ว

    Refurbished Brembo calipers but brand new pistons and seals are good as new! 👍🏼

  • @smilie120
    @smilie120 7 ปีที่แล้ว

    I have a slight wobble in my gearstick will this help tighten it up a little? Thanks.

    • @EP3Stuff
      @EP3Stuff 6 ปีที่แล้ว

      Hi, sorry for the late reply!! I would probably say to replace the bushes at he gearbox end with solid ones would be good but the short shifter would make it feel better too!

  • @darrellarmstrong787
    @darrellarmstrong787 7 ปีที่แล้ว

    haha nice one man thanks for tje help. also loved the part on how to use the kettle 😂😂😂

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      No worries man. Always good to know how to use a kettle!

  • @joeguinness8951
    @joeguinness8951 7 ปีที่แล้ว

    Would this kit fit an s2000?

    • @EP3Stuff
      @EP3Stuff 6 ปีที่แล้ว

      Hi Joe. Sorry for the delayed reply, your comment got held by TH-cam and I didn’t see it. I think they do a specific S2000 kit now. Hopefully you already got one!

  • @Manekin98
    @Manekin98 7 ปีที่แล้ว

    Do you get any problems after installing the new springs? I want to get a Eibach set -30mm but I'm worried about it scraping etc?

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      Hi mate. No issues at all, no scraping or anything. The -30mm setup is fine on a standard car TBH.

  • @CTRTurboEP3
    @CTRTurboEP3 7 ปีที่แล้ว

    Nice Video! What is the color of the rims? Were they painted or powdered?

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      CTRTurboEP3 Hi mate. The wheels were painted. I can't remember the exact colour, it's an Audi colour though. Anthracite Metal maybe. I can't be 100% sure.

    • @CTRTurboEP3
      @CTRTurboEP3 7 ปีที่แล้ว

      EP3Stuff Thanks!!

    • @CTRTurboEP3
      @CTRTurboEP3 7 ปีที่แล้ว

      EP3Stuff Thanks!!

  • @garywells2404
    @garywells2404 7 ปีที่แล้ว

    Will it fit an ep2?

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      Yes mate I think so, pretty sure the EP2 has the same gear linkage setup!

  • @jamieclark8198
    @jamieclark8198 7 ปีที่แล้ว

    What about the tweeters on the A pillar?

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      Hi mate. I have never fitted a set but they should be very straightforward. The A pillar trim pops off at the top and bottom and there's plenty of room to fit the wires in!

  • @8ThePaco8
    @8ThePaco8 7 ปีที่แล้ว

    Hi man, Do you know where can I find the rear caps from the steering wheel? Got one, but caps where lost

    • @8ThePaco8
      @8ThePaco8 7 ปีที่แล้ว

      The rear covers I mean

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      I think you can get them from Honda mate. tinyurl.com/ep3cover, about £10-£12.

    • @8ThePaco8
      @8ThePaco8 7 ปีที่แล้ว

      Thanks guy, stay working on it. Great job

  • @ross8836
    @ross8836 7 ปีที่แล้ว

    thanks for the fast reply dude. big fan of it vids. mechanic myself. own ep3 n/a 230bhp tdi north. agree with tdi north comments in previous videos. plenty of other people out there who actually care for customers and take pride in there work. who is mapping it? Got my m8s 03 sti running over 400bhp. the great Andy Forrest scooby specialist up here in Scotland didn't quite do the job right. more like that will do, c ya! after learning how to map cars and use the software. took it to a guy who has pride in what he does. showed us everything and explained questions with TRUTH, car is a completely better animal. fuelling ace etc. look forward to the next video.

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      +Ross 88 hi mate. It's actually being mapped by a company local to me. I'm down in the depths of Cornwall so getting anywhere for mapping is a pain. The local guy hasn't mapped this setup before but is very good and does a good job so I'm hoping for good results!

  • @ross8836
    @ross8836 7 ปีที่แล้ว

    still have civic?? any vids coming soon??

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      +Ross 88 hi mate, yes still got the civic. No plan to sell it! Yes I may do a video shortly as it's in being mapped at the moment!!

  • @DaveBibby.Aviation
    @DaveBibby.Aviation 7 ปีที่แล้ว

    Newb EP3 owner here. Your channel is immense for someone who is just starting out in the world of EP3 Type R so thanks for all the amazing content. Do the front speakers also require the autoleads speaker adaptor wires?

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      +Venkmans Swagger cheers mate. Yes the fronts need adapters too if you want to plug straight in.

    • @DaveBibby.Aviation
      @DaveBibby.Aviation 7 ปีที่แล้ว

      EP3Stuff awesome! Thanks man. keep up the good work on here and on the whip

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      +Venkmans Swagger thanks dude.

  • @philliporial6483
    @philliporial6483 7 ปีที่แล้ว

    what place did you get this steering wheel re upholstered at? do you have any contact ?

  • @wulfman1887
    @wulfman1887 7 ปีที่แล้ว

    does somebody have a link of an ep3 owners forum? i live in the netherlands and recently bought an rhd ep3!

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      www.civictype-r.co.uk is a good one mate. Cheers

  • @Manekin98
    @Manekin98 7 ปีที่แล้ว

    Hi Adam, just wondering, is this the right one? www.ebay.co.uk/itm/391681486595 Picture is not right as you said in the description.

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      Hi mate. Yes that's the one!

  • @martinl6496
    @martinl6496 7 ปีที่แล้ว

    Hi mate, just wondering where i could get the Type R 'Customer Information' tag on the shifter?

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      +Martin Ly hi mate. They came with the cars when they were new so maybe you could find one on eBay?

  • @erickgutierrez5798
    @erickgutierrez5798 7 ปีที่แล้ว

    I have the Si , since I live in The U.S , is it the same thing ?

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      Erick Gutierrez hi mate. Yes I believe it's all exactly the same. Good luck.

  • @mohammadhabib7354
    @mohammadhabib7354 7 ปีที่แล้ว

    Hi mate, really sorry to bother you. Just wanted to know if you remember what size drill bit you used to drill the holes in the door and what size screws you used to A) hold the speakers to the adaptors and B) screw the adaptors in to the doors. Would really appreciate any help you can provide, thanks very much in advance mate.

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      Hi mate. I don't remember unfortunately. I think I used an 6mm drillbit, but you want to go as small as you can really. Use self tapping screws and let themselves work their way in. Cheers

  • @Edinxg
    @Edinxg 7 ปีที่แล้ว

    I have a question,if i buy steel brake lines for the stock calipers,will these fit the brembo calipers?

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      Hi mate. They should fit yes, the HEL lines are designed for standard calipers so they should fit in reverse. Cheers

    • @Edinxg
      @Edinxg 7 ปีที่แล้ว

      ok thanks alot my type r friend.i also have this bbk now for my fn2,istalling it asap.

    • @EP3Stuff
      @EP3Stuff 7 ปีที่แล้ว

      Great stuff, hope you have fun fitting it!!