วีดีโอ

What I DO NOT like about it is the hot exhaust exits straight out the back. If you're not careful and you back up to Vinyl Siding or some of the Gazebo Curtains out there and the like, you can melt them with the hot exhaust. Believe me I know. With my other leaf blower ( a Ryobi) this is not a problem.

Thanks 😊

Another great thing to do (and is cheap) is after cleaning the deck, allow it to dry, and lightly spray (dollar store) Vegetable/Olive oil on the underside to prevent rust! Hello from Seattle, Washington

Have you changed the oil yet?

What happened to your toro 21 mower

It blows at 215 miles per hour and 510 CFM and has 42 newtons of force

Thanks I'm new to this😅

Hey language

The Toro 21mower with rear wheel drive in battery that I have is the model number 21357.

I have one of the mowers but it has smartstow and battery powered.

Getting one of these mowers this model 20339 sometime this week

Good job toro for making it guaranteed to start

Didn't realise I had to run it after turning the hose on 😂😂 wandered why it was spraying straight down doing nothing woops thanks 🙏👍🏼 from uk

Дзздщщщ😂😂😂😂😂😂😂😂й😂😂й😂

Thanks - this is one of those things that they think is so obvious that they don't bother putting it in the instructions!

Thsbks you so much

Thanks for the quick and concise video!! Forgot the side slider mechanism was the choke.

Thank you!! Wanted to surprise my dad!

Great video brother!!

Excellent video, I need to get on of these blades. Good to know about the left hand thread. Only other thing is put the cotter pin through the hole before opening. If it doesn’t fit get the correct size.

Hey Language

What???? You’re telling me I’ve been taking the whole thing apart everytime to release more line😢😅🥲

You should upload more content

Where can I buy this

Ty

In the first 7 seconds this looks like an advert for Advanti saw blades. There's a rule - don't put a blade on a machine it wasn't made for. There's another rule - only use a blade on a machine designed or manufactured by the makers of the machine. The manufacturers of the machine and the blade bear no responsibility for use of their product outside of their recommendations. I haven't seen this video in its entirety, but there are some comments here that warn against attemptingt to adapt a machine for blade that wasn't designed for it; and their reasons are sound. Personally, I would not attempt this.

i HAVE A TORO SUPER RECYCLER WITH A DIFFERENT BLADE COVER. I MOVED THE BRIGGS ENGINE TO A CRAFTSMAN DECK AND ADDED AN ARNOLD EXTREME UNIVERSAL BLADE AND I SAW A FEW MINUTES USING THE ARNOLD BLADE THAT THE TOOTH ON BOTH SIDES OF THE BLADE GOT BENT. CAN AN ARNOLD EXTREME UNIVERSAL BLADE BE USED ON A CRAFTSMAN DECK. THE FUNNY THING IS THE CRAFTSMAN DECK WAS HIGHER THEN THE TORO BUT THE BLADE STILL GOT BENT. ANY IDEAS OTHER THAN DECK SPACERS OR A SHORTER BLADE ADAPTOR?

Was that the "Toro Sae 30 18oz/Toro Sae 13w-30 32oz oil?

Thank you

Who’s watching because your a dummy and just started working doing landscaping and trying to gets tips lmao. New guy your going to need the

where did you get the blades and the other pieces?

My favorite string trimmer in the world is the srm225 from echo

Thanks buddy, very good video

I'm too pussy to ask my dad thank you

What is the purpose of the thing on the opposite side of the handle that you can unscrew? It has a spring in it. Does it change the pressure on how hard you have to squeeze?

Perfect for Johnson grass and thick weeds.

Thank you...was messing around with this for 30 minutes and two seconds on your video got me through

Please tell me you don't ever wear those sandals for actually mowing your yard

Great job! Thank you

Thanku sir, I know that's probably lazy of me not to look at the manual but for me it's easier to watch how to put something together

Maia Drives

Sipes Ranch

Thank u

now if someone can make this where you can switch which way it discharges.

did you remove spark plug before removing blade?

Using the 2 stoke gas won't hurt the machine. It will only make it smoke more. I don't recommend doing it but if you absolutely have to, it should be okay.

Thank you!

Helped me out a lot. The directions that come with the guard and the blade had me messed up

Why would you use that to cut logs???? Seems like that might mess up your saw motor??

That wasn't in the video to not drink before