Replacing the Mower Blade - Toro Recycler 22
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2020
- Here's a quick tutorial on changing out the mower blade on the Toro Recycler 22 inch self-propelled mower.
Wondering when it's time to replace the blade and which blade to buy? Check out this video: • When to Replace your L...
LIKE this video if you found it helpful and don't forget to SUBSCRIBE for more videos like this!
Have questions? Throw them in the comments below and I'll do my best to answer them!
Thanks for watching! - แนวปฏิบัติและการใช้ชีวิต
![รวมเพลงลูกทุ่ง 6 หนุ่มไทบ้าน ฮิตติดกระแส ชุดที่ 1 l มนต์แคน ไมค์ ไผ่ เสถียร ไหมไทย พี [Longplay]](http://i.ytimg.com/vi/GD2v1OjMw5I/mqdefault.jpg)
Hey, I just wanted to say thanks for the professional video, like everyone else it was the original blade and was pretty stuck on there. I got a breaker bar and WD40 and eventually broke it loose. Thank you for getting to the point without a lot of like and share crap.
Thanks! Nice How-To :) You got right to the point without a lot of fluff beforehand like in lots of other instructional videos. Appreciate you! 👍😁
Straight to the point with no unnecessary chit chat! Thanks!
Changed my blade using this video as a guide. My Toros handle bars do not turn into a stand but I flipped it up on its side. Cleaned my filter and topped off the oil while at it. This is in spring after 2 cuts, and the tip is spot on. I keep the deck on the penultimate peg for a tall grass and with the mulching over and over the years, my yard is happy and healthy.
Oh man! I am a 77-year-old female with severe arthritis and very bad eyesight up close and I had to change the blade and replace the self propelled belt on my Toro 22 inch recycler lawnmower. The belt was caught behind the adapter! i had to remove blade! I went through at least 15 videos of people changing the blade, but not a single one of them showed me the orientation of the blades to put it back on and the holder. I got caught in a bad rainstorm and I had to snatch everything up and put it in the house because I just don't like my stuff getting wet. If course, i picked up the old blade, belt, etc and covers on the pulley, etc not remembering i had them lined up and orientated in the way they went back on! Two days later, I finished putting the belt on. But for the life of me, I could not remember the orientation of the blade and the brackets etc. you were the only one who showed the blade(which i could not see because of reflection. BUT YOU told about the blade teeth tilting toward the underside of the mower! I had not tried to start the lawnmower up yet; so I go back out and sure enough I had the blade on backwards! In my defense though it did fit and screwed back on very well even though it was backwards! 😬😬I basically have to feel things with my finger tips to get them right. The blade was a challenge! it fit both ways! I just wanted to say thank you! took me two days to change a blade on the lawnmower because no one really gave the explicit placing in DETAIL!
THANK you so very much from a grateful old lady!
Same here!!! My husband has dementia. Our lawn looks like Augusta National Golf Course. He has an AG degree and expert in lawn care. Now, he is unable to keep our lawn in PGA golf course beauty and I am trying to do it to keep him happy. He ran the mower over the curb last summer and damaged the blade support plate. He also stripped the bolt that hold the support plate in place. I am a Southern Belle who shops for lipstick, perfume, nail polish, shoes and purses NOT LAWN EQUIPMENT. This video is the best!!!!
I always take a picture of the “item” I am working on before I dismantle. Glad to see I am not the only senior lady still tackling things! You go girl!
I hadn’t changed mine in 4 years and had to put a socket wrench on there and beat it loose with a mallet. Guess I better change it every year from now on. Had no idea it was this easy.
Thanks! Been a couple of years since I replaced the blade. Going to do it right now. Thanks for refresher.
This is a very good video for a first-time blade changer or a refresher for someone that hasn't changed a blade in a long time. I was just curios and asked at an Ace Hardware the cost to have this done this and it is $75.00.
Thanks for this! Made it very simple for me to replace the old dinged up blade on my 22" Toro!
Thanks, I’m getting ready to change mine out and needed a refresher.
As simple as this is, it’s a question I needed answered. Thank you. Good video.
I haven't changed my blade in years.. lol I cut the median strip on my street. When the grass grows over the curb, I hang the left wheel off the curb and drag it backwards on the curb, removing the grass and sharpening the blade at the same time.. 👊😠 I beat the shit out of my Toro. I leave it out in the rain & snow every year. Never change the oil. Replace the air & plug once, only because it didn't start on the first pull one year. Spark plug cable BARELY touched the plug. She's bulletproof. 🤣🤣 been trying to beat her up to get a new one. Doubt I ever will.. Best 100 Craigslist find.. EVER 🤘😎
Thank you so much for that blade info. I almost put on one of those cheap replacements. But your video saved me...THANKS AGAIN
Be sure to pull the Spark Plug Wire Connector off the spark plug the very first step. Reconnect the wire the last step.
PULL THE PLUG WIRE Use a piece of 2x4 to keep the blade from turning.
Perfect! Thanks a bunch from Florida!
Thank you, appreciate your time!
Super easy, Great job and thanks
Sounds easy, loved the tip about using the blade as leverage for loosening and tightening. - now if only I can get the bolt off!! Been working on it for 2 days. . .Just not budging
Maybe try an impact wrench if you can?
Breaker bar
Took me 3 hours to get the bolt loose. My back and legs are still sore.
Make sure the gas tank is empty and carb, then you heat it for 10 or 20 seconds with a torch, and it comes off easily.
I used my dewalt impact it made short work 😅 of the bolt!
Thank you so much for doing this!!!
Awesome! Thanks for the help!
Don't forget disconnect spark plug boot.
Thanks bro. Needed this.
Great video thanks 👍
Toro is the best.I had mine 4 years now and still going strong.
LOL 4 years is nothing. My 34 year old Snapper just died. Can't get parts, so had to replace it.
Great video thanks
great video and great angle on how to replace. noice
Great job 👏
Thank you brother 🙌🏽
Thanks 🙏
I have a two piece mulching blade which is an aftermarket for a Honda. Do you think I can use this system on my 21inch toro recycler??
Good video. Thanks!! Is it still advisable to pull the spark plug wire off before performing this?
Yes, you can just as an extra precaution. You'd have to be holding down the bar on the handle in order to start the mower, but just in case, unplugging the spark plug is a good idea!
Hi, no matter what do the faceplate won't sit flush, suggestions?
Is it ok to use a double blades for mulching?
Dont need torque wrench to tighten?
What happens to the oil and gas when you tip the mower up like this.
I bought a replacement blade at Menard’s for a Toro but it’s made by Yardworks
Could you tell me the size of the bolt, Dia ,length and type of thread . Thank You
I used to live in an apartment. I've been in my mobile home for about 2 years. That's when we bought the lawn mower itself. Propelled Toro it's been like 2 years since I changed the blade. I just want to make sure I put it on the right way not the wrong way. Can you send me some video please? Thank you very much I really appreciate it
Thanks, I needed to see this, Lost my booklet.
Thanks, my exact mower! Gonna do this in the next week or two. Do you have any videos on changing the oil on the 22" recycling smart-stow Toro? I think they claim you don't have to change the oil but.........I dunno. Thanks!
Just make sure it doesn’t have any gas and then you tip it upside down to remove the oil out of the same filler hole
@@260bill260 Thank you!
Love ur hat
What is the torque and no need lock tide
Thank you, the bowed side of the blade goes down? Are these blades marked which side is the grass side? Great Video! Do you need to remove the Spark Plug wire so it cannot accidentally start!
Can you tip the lawnmower like this when there is gas in the tank?
Any issues with gas or oil leaking out while the mower is standing vertical like that??
I ran my mower out of gas before I did this.
Did you drain the gas first?
No I didn't, the Recycler Smart Stow is designed to sit upright even with gas in the tank (as long as it's not overfull).
Is there a torque value for tightening the bolt?
82 newton
well done. now...if I could only find a 5/8 socket in my toolbox...lol😢
No need to unplug spark plug boot?
You can just to be safe, but as long as your not squeezing the bar on the handle, the engine won’t start.
Got a torque number?
I researched. It’s 60.
Hahaha! It took me 3 hours and every trick I knew to get the bolt loose.
Yeah, I couldn’t get that boat loose either so I gave up and just use the file and sharpen the blade with it on the mower
Make sure you sharpen a newly purchased blade with a beveled edge. You should sharpen your blade at LEAST twice a year, or as needed. Shredded tips can lead to fungus.
sharpen a new blade? you need to sharpen new ones? why?
This will be my first blade replacement. Seems easy after this video. Thank you very much!
@@fredsmith6324 they aren't sharp enough.
took my blade off, it was put on backwards from the factory...............mulch side down
I'm not normally the saftey police but for God's sake man pull the spark plug!
If you’re not pulling the bar the mower won’t start
Pull the plug, and have a wooden block holding the blade in place. Better safe than sorry, I was just remembering how easily a prop plane engine will start, if at the proper point in the rotation.
Saftey
It's not gonna start. But disconnecting the plug is enough anyway. I mean, might be a good time to replace it
Non mower knowledger here, where is the spark plug you'd unplug?
Size socket?
That would be really helpful.
You’ll need a 5/8 socket: 1:36
PULL THE PLUG WRIRE!
Fml i can't get it offff 🥲