วีดีโอ

@@617ta1 no we have not had any snagging issues

@@969Garage hm, the +5 on the 17rnd mag will get you 20, as the 17rnd mag is just a 15rnd with longer spring and stock extension. Make sure you removed the stock locking plate. And the 15rnd with +2 will get you the 17 but it is a tight fit for the last round. That one doesn’t have a locking plate as they use the spring. Let me know if that helps. If not email us and I’ll get some more info from you and get you working right away

floydscustomshop.com/P10-Base_p_192.html

Website was having an issue. We got it back on! Thank you!

Our porting works amazingly well and keeps the same size so you don’t have to mess around with holsters. Also we keep it reliable with the stock springs. But you can swap springs to tune it even more

No, the regular hellcat frame is too short, would need to be a grip extension aswell as a Magwell, then you would need to change to pro mags.

Are you talking about the locking pin?

Yes i think so​@@floydscustomshop2157

No, the ten round mags are designed in a way that you can Not add capacity. We make plates specific for the 10rnd mags.

@@floydscustomshop2157so is there any way to add capacity to the 10 rd or only a mag well ? Thanks for the reply

@@Mr.Two4 our plates for the 10rnd mags will allow you to use the Magwell, but because of the design of the 10rnd mags having the rails go inward rather then outward, there is no way to add capacity on those mags

We are a small family business and price everything as reasonable as possible. The quality of our products speak for them selves. But if you want some cheaper parts and don’t mind a finish blem, you can always call the office and see if we have any blem parts.

Still a little ways out, but it’s in the works. Can always add it after porting

No need for the Magwell screw

@@floydscustomshop2157 What’re your thoughts on putting some sort of epoxy/adhesive when attaching the mag well?

@@FilthyFirearms I would not recommend it. Are you having any issues with it holding tight?

@@floydscustomshop2157 Why not ? And no , I was just thinking on applying some type of epoxy before I put the set screw in

@@FilthyFirearms the set screw will bite into the polymer of the frame and hold the Magwell on securely. You shouldn’t need anything else as long as you follow the video and do it right. Using epoxy will make it permanent and not able to remove without damaging your frame.

Both work for either mags as the mag body’s are the same size. The 17rnd mags have slightly longer springs as they come with the stock +2 to make them 17rnd

@@floydscustomshop2157 Thanks for the quick response , I’ve been hearing a lot about the quality of your company , I’ll be placing some orders soon 👍🏼

@@FilthyFirearms thank you very much!

Sorry I’m confused at what you mean. The follower is the plastic peace at the top of the spring that pushes up the bullets. The 17rnd mags (15rnd mag with a stock extension) have a locking plate that holds on the extension. We remove that plate and lock on with the set screws. If you are meaning the direction that the extension slides on, the +5s go on from the back to give the best shock resistance and durability if dropped. The +2s go on front to back only because of spacing issues with the back of the frame. Couldn’t get a solid hold going back to front with the angle of the mag on that extension. But still locks in securely with the screws

@@floydscustomshop2157Thanks I understand now. Placing my order today!

You can request them cerekoted for a extra fee

This is an edc version, it’s a little wider then the frame but still very concealable and useable. Some EDC style magwells out there are so small they are basically useless

They are nice and low, perfect for backup sights, just wish I could find some black out sights

Cool, thanks

No, problem is that the frame is too short, it would need to be a grip extension as well as a Magwell, basically making it the same size frame as the pro and you would have to switch to pro mags

On the compact mags we do recommend them. Most springs can be stretched a bit, but the PDPc springs seem to be weak and can be stretched but I would recommend the extra coil springs we sell

Hey, it's me again :) Please tell me or add in the description on your website the weight of PDPc magwell and the weight of +6 baseplate. It's beneficial to know it when you want to keep your gun balanced. Thanks 👍

@@_D3adSh0t_ I’ll let the office know

No it will look clean still with the enforcer porting. This one in the video has not been refinished. The slide and barrel is a carbon steel though so there is some risk of rust if you don’t take care of it. Just a little oil wipe down when you clean your gun should be fine

Check the engraving on the frame under the back strap to be sure what frame you have. The stock frame is the medium, unless they changed something. Email the office, as long as nothing is scratched up then you can send it back for an exchange

Just talked to you on the phone thanks for the help!

We have a Magwell specifically for the Metal frame as it is different. But the extensions are the same yes.

Thank you very much!

Thank you very much!

They are in stock and shipping out now! If it says out of stock then the website just hasn’t been updated

I have sound this time! Try reloading your page.

They are up and on the website! Love the echelon!

Thank you! Any plans to make a larger, I guess “competition” style magwell? Just curious.

Also, it says only the small is available?

Oh. In the blem. Got it.

If it’s in stock, then same or next business day

Thank you! I have not seen strikes base plates. If they are designed to the size and shape of the frame like the stock plate then no they won’t work. If they look like they are designed to work with a Magwell then it’s possible, but I can only guarantee our own parts to work

Awesome thank you!

No the 10rnd stock mags are very different. We have plates specifically for the stock 10rnd mags

It’s a common Allen wrench for the screw in the Magwell. I believe it’s a 5/32 but I’m not 100% sure. We are closed Fridays but if you call in Monday and hit 2 to go to the shop I can verify for you

@@floydscustomshop2157 ah ok thank you I thought y’all were avoiding my calls🤣🤣

I have not tried there plates. We can only guarantee our own plates and extensions as we start with the Magwell and make as seamless a transition as possible. Then make the extensions to fit and we can only control our own machining

Yes

Yes they do

That’s our Magwell. All our videos are for our products. Floydscustomshop.com

@@floydscustomshop2157 I looked in the page and didn’t see a magwell for a sig p320 x compact

@@texascowboy5902 sorry we don’t make anything g for the P320

@@floydscustomshop2157 it’s alright 👍🏻

We are making the 10rnd mag plates very soon. So they will be available in the next month or so. You can modify the stock 10rnd plate to work in the meantime time. Just chamfer the sides with a file or something. But yes ideally you will change out the plates once we have them so that they fit properly and stick out enough for easy mag changes. The ORM ones will sit inside the Magwell a little

Yes just remove the spacer sleeve. There is a slight chance of over insertion though if you slam a mag in with the bolt open. We do make extensions and spacers to fill the gap with the Magwell

We make spacers t go with our extensions to fill the gap. They are tight to the mag so they don’t slide off. Unfortunately we don’t have the licenses required to sell or ship outside the USA

@@floydscustomshop2157 maybe look into IRUNGUNS. Canadians use them as a middle man to import. I think you could do that avenue. I just really want to be able to use the mags in my MP9 and the FPC without worrying about that spacer and fit all the same in the full size grips

Yes we are working on them for the ten round mags

Thank you for this question I was looking everywhere for this not a lot of companies think of us sadly

@@floydscustomshop2157on the topic of California do you guys have any intentions or know a company that could do a loaded when up indicator delete?

@@Dsynced_ none I know of, but our base plate for the 10rnd mags just dropped yesterday

@@floydscustomshop2157 nice you guys are hitting the hammer on the nail with these products thank you guys! I just ordered my 10 rd mag baseplates and magwell will be doing a small review for my buddy’s thank you